Fire-rated sealing and fire stopping in Hillend, Angus
Planning work on a service penetration in Hillend? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Old intumescent sealant that has split away
- Unsealed penetrations discovered above suspended ceilings
- Fire stopping installed outside its tested range
Fire stopping for businesses in Hillend
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
How we handle fire stopping in Hillend
Facilities managers in Hillend often find open service penetrations when ceilings come down for other work. Where the walls and floors already have a fire-stopping specification, we can work to it using the product and detail it sets out. Where there isn’t one, the designer or fire engineer needs to set one first. Most enquiries involve fire stopping installed outside its tested range and unsealed penetrations discovered above suspended ceilings, across joints between fire-resisting walls and floors, small duct penetrations where the tested detail allows and service gaps in risers. A specialist sealant contractor works differently from a general builder: in Hillend, that means joint design, primers and backing rod as standard.
Hotels and care homes around smaller places like Hillend often have services added during refurbishment. We fit the specified fire-rated sealant as its published detail shows and raise it if another product is needed.
We stand by our work with a 12-month guarantee. It covers how we prepared and applied the sealant, and if something we did falls short, we return to it.
- Location
- Hillend (DD8)
- Wider area
- Angus
- Guarantee
- 12 months on every job
- Quote
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Page updated
- 3 November 2026
Fire stopping in Hillend: the local picture
Scottish guidance (non-domestic Technical Handbook, clause 2.1.14) asks that penetrations match at least the fire resistance period of the element they pass through, with products tested for that end use. Our part is installing the specified fire-rated sealant to its tested detail.
For a hospital such as Forfar Infirmary (2 miles north-west of Hillend), penetration sealing is normally phased ward by ward, with infection-control rules agreed first. For a unit at a centre such as Forfar Retail Park, 2.5 miles north-west of Hillend, penetration seals are worth checking after each shop fit. Tenant changes at parks like Restenneth Business Park (to the north-west of Hillend) bring new data and services, and openings through fire-resisting walls need the specified seal.
Hillend is about 2 miles south-east of Forfar, in Angus. We cover Hillend and the rest of Angus, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. Across Angus, 65 places are covered, including Hillend. Our Dundee page has more on work in that area.
We cover the DD8 postcode districts. If your building is just outside Hillend, we cover Lownie Moor (1 mile west), Kingsmuir (1 mile north-west), Craichie (1 mile south-east), Lunanhead (2 miles north) and Forfar (2 miles north-west). Nearby towns on our patch include Arbroath (10 miles south-east), Montrose (15 miles north-east), Monifieth (10 miles south), Carnoustie (10 miles south-east), Kirriemuir (7 miles north-west) and Brechin (10 miles north-east).
Around Hillend
Well-known places in the area include Meffan Museum and Art Gallery (2.3 miles north-west) and Forfar Castle (2.4 miles north-west). The countryside around Hillend includes Loch Fithie.
More services for Hillend
From enquiry to sign-off
Diagnose, treat, sign off: that’s the shape of every visit. We inspect the joints and confirm what’s in scope, then the work is carried out to the specified product and detail, and we finish with a walk round so the work can be signed off. For a building near Hillend, directions, keys and a contact on the day are worth sorting early. We’ll confirm the plan with the fixed quote.
- First we confirm the product and tested details named in the specification.
- Openings are measured and grouped by detail.
- Improvised fillers and failed sealant are removed.
- Where the detail needs backing, it goes in at the stated depth.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- We walk the completed areas with you and confirm the records agreed at quote stage.
Preparing the site
- Confirm the product named in the specification
- Move anything stored against the joints
- Agree which areas must stay open
Getting a fixed quote
Every quote starts with the facts: what’s there, how much of it, how we reach it and what’s specified. Share whatever details you have and we’ll fill any gaps with a visit.
Read more
Work for main contractors and building owners
We take on planned maintenance as well as one-off repairs: resealing failed joints building by building, on a schedule that suits your budget. Sites in Hillend can sit alongside others in a wider programme across Angus.
Hospitality, education, healthcare, office and retail clients come to us directly as well. The work is planned around how the building runs, so the building keeps working while we do.
FAQs: Hillend
Is Hillend too small for you to travel to?
Not at all: smaller places are covered as well as towns. Every Scottish council area is within our area. We plan jobs in smaller places so return trips are kept to a minimum.
Can you take on a job at a hospital such as Forfar Infirmary?
Yes, provided the work is planned with the site’s estates team. The estates team’s permit system and infection-control rules come first, and the work is planned around them.
Can you work to our specification?
Yes. We follow the specification, along with the manufacturer’s installation guidance, and any queries are raised before we start.
Is the BS 476 change in 2029 relevant to fire stopping?
In England, references to the older BS 476 national classes are being removed from Approved Document B from 2 September 2029. The European route, BS EN 13501-2, then applies. Product selection stays with your designer.
How long do sealant joints last?
Nobody can honestly give a figure in years, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular inspection is the best way to catch problems early.
Do you take on multi-site work?
Yes. Several buildings can share a single quote, with one point of contact across South East England, Greater London and Scotland.
What if there’s asbestos in the old mastic?
Some older mastics, especially in pre-2000 buildings, can contain asbestos. We check the asbestos register before cutting out old sealant in an older building, and if asbestos is suspected, work stops until it’s tested. Removing asbestos is a job for asbestos specialists, not us.
Doing it in-house
Certain joints really need a specialist: for instance fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. A poor seal in places like these tends to cost more to put right later.
There’s also the paperwork. Many sites expect CSCS cards, RAMS and proof of insurance, and our CSCS-carded applicators are used to working under those rules.
How the job changes by surface
Small ducts
Ducts are only sealed with sealant where the detail allows it. The ductwork, its supports and any dampers are for the ductwork contractor.
Plastic pipes
Waste and drainage pipes through floors are a frequent case. The detail decides whether sealant alone is enough.
Why deal with it now?
An improvised seal can look finished while offering no tested performance. The fix is to remove it and reinstall to the detail, so it makes sense to get it right first time. For buildings near Hillend, dealing with all the failing joints at once saves return trips. Photos of each area help us quote the whole job.
Every site prices differently: joint size, product, access and site hours all play a part. A fixed quote follows once we understand the job.
Why us?
- 12-month guarantee on workmanship
- A fixed quote before work starts
- One phone line for London, the South East and Scotland
- CHAS accredited
See how commercial sealant jobs are priced or our accreditations and insurance.
Honest limits
We check first that sealant really is the fix. It isn’t the answer for:
- Reviewing a building’s overall fire safety
- Approving the work on behalf of building control
- Plastic pipes whose detail calls for a collar or wrap
If you are not sure, just speak to us on 01277 525 020 or send details through our quote form and we will give you a straight answer.
What we seal
- Linear gaps at wall heads
- Small duct penetrations where the tested detail allows
- Joints between fire-resisting walls and floors
- Service gaps in risers
- Cable penetrations
- Pipe penetrations