Industrial and floor joint sealing in Buttsole, Kent
Floor joint sealing for Buttsole, from a contractor working since 2005. Fully insured and CHAS accredited.
- Unfilled floor joints collecting dirt and grit
- Cracked and crumbling joint fill
- Sealant pulled out along a truck route
Floor joint sealing near Buttsole
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Floor joint sealing for commercial buildings in Buttsole
Few warehouses can shut a whole floor while joints are done, so we phase the work aisle by aisle or bay by bay. Share your site hours and access windows and the programme is built around them, with goods still moving in the areas we aren’t in. We work on saw-cut induced joints, joints along racking aisles and construction joints, and the failures we are asked to look at most are dock area joints that have failed first and untidy open joints in a retail unit. Looking for mastic applicators who cover Buttsole? We’ve been sealing commercial buildings since 2005, with CSCS-carded applicators.
Smaller community and commercial buildings around Buttsole have their own movement joints in walls and floors. They tend to be overlooked until something leaks or cracks.
We sign every job off with a 12-month guarantee. The promise is simple: if the work we did fails within twelve months, we return to fix it.
- Where
- Buttsole (CT13, CT14)
- Region
- Kent
- Cover
- 12 months on our workmanship
- Price
- Quoted before any work starts
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
Questions about Buttsole
Can you work at a site such as Birnham Farm Business Centre, by Buttsole?
Yes. Estates, retail parks and business parks around Buttsole, Birnham Farm Business Centre among them, are all within reach. Send details of the unit and the work through our quote form for a quick quote.
Is a smaller place like Buttsole outside your area?
Not at all: smaller places are covered as well as towns. Our area covers London and the South East counties. Good photographs up front let us bring everything on the first visit.
What happens if old sealant might contain asbestos?
Asbestos is possible in some older mastics, particularly in buildings from before 2000. Before we disturb old sealant in an older building, we ask to see the asbestos register or survey, and if asbestos is suspected, work stops until it’s tested. Removing asbestos is a job for asbestos specialists, not us.
Do you have public liability insurance?
Yes. Mastic Doctor is fully insured, public liability included.
Are you CHAS accredited and on Constructionline?
Yes. Mastic Doctor is CHAS accredited and a Constructionline member.
When can forklifts run over new joint filler?
The wait is set by the product’s cure time and cooler floors take longer. Phasing is planned with that in mind.
Is it normal for joint filler to separate?
Young concrete carries on shrinking for a long time and a stiff filler can separate down one side. It is usually dealt with by topping up.
Nearby places to Buttsole
Other services in Buttsole
Owners, agents and contractors
Building owners and managing agents use us on sealant work across single buildings or whole portfolios. Several sites can go on one quote, which keeps the paperwork simple.
We take on planned maintenance as well as one-off repairs: resealing failed joints building by building, on a schedule that suits your budget. Buttsole can form part of a wider programme.
Maintenance after handover
Every sealant joint needs some looking after, and how long they last depends on how they’re treated. We suggest:
- Mention any aggressive cleaning regime at quote stage
- Plan for a top-up on newer floors
- Record damaged joints with a photo and a location
- Make joint checks part of your floor inspections
Once cured, the joints get cleaned along with the slab. Tell us about aggressive cleaning products or hot washing at quote stage so the product suits them.
Regular inspection catches failing fills before the edges go. We can quote a programme that starts with the busiest areas so nothing is left to fail.
Our process
Tell us your site hours and access windows and we will plan around them. On the day, the work area is kept contained and tidy, and your contact hears from us before we move to the next area. Rural sites near Buttsole may need directions, gate codes or a contact on site. Send that with the details and we’ll confirm the plan with the quote.
- We walk the floor and mark up joint widths, edge damage and traffic routes.
- You receive a fixed quote showing products and phasing.
- Old fill and packed debris come out until both faces are sound.
- Dust is vacuumed out and primer applied where specified.
- The joint is filled to its specified depth and trimmed level.
- Zones reopen once cured and the work moves on.
Getting the site ready
- Have the specification and drawings to hand
- Tell us what induction or permit system the site runs
- Point out any areas we must not close
Ask for a quote
If there’s a specification, drawings or a tender package, send it with your enquiry, and we will price against exactly what is specified. Smaller jobs need nothing more than photos and a few notes.
Read more
Doing it in-house
Putting right a botched joint often costs more than sealing it well at the start, because the whole bead must be removed and the faces cleaned back again. That’s why many clients bring in a specialist from the beginning.
A short, simple internal joint is often within reach of a maintenance team. Where it goes wrong is preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
Floor joint sealing around Buttsole: how the place shapes the job
Buttsole has two named business or industrial parks inside a 3-mile radius. That puts plenty of warehouse floors, service yards and car parks close by, all with joints under traffic. At about 63 miles from central London, Buttsole is within reach of the capital. Warehousing clusters around the motorways that ring and radiate from London, and their floor joints take forklift and pallet-truck traffic all day.
For a school such as Eastry Church of England Primary School, playground and building joints can be done in the holidays. At places like Pike Road Industrial Estate, 2.8 miles south-west of Buttsole, joints are sealed a section at a time so operations carry on.
Buttsole is about 4 miles north-west of Deal, in Kent. If you’re looking for floor joint sealing in Buttsole, we can help, as we do across Kent. Buttsole is one of 931 places we cover in Kent for floor joints. London is covered too, some 63 miles away.
Anyone looking for floor joint sealing in CT13 and CT14 gets the same process as the rest of our area: send details, get a quote, we seal, guaranteed. Buildings on Mill Lane, Liss Road and High Street are within our area for floor joints. Nearby places we also cover include Eastry (1 mile north), Ham (1 mile east), Statenborough (1 mile north-east), Marley (2 miles east) and Felderland (2 miles north-east). Further afield, our area takes in Canterbury (10 miles west), Margate (10 miles north), Dover (7 miles south), Folkestone (12 miles south-west), Ramsgate (8 miles north-east) and Broadstairs (10 miles north-east).
Around Buttsole
We work on buildings around Sandwich Technology School, Ham Fen and The Five Bells pub. Buttsole’s nearest station is Sandwich station, roughly 2.5 miles north-east. Well-known places in the area include The Precinct Toy Collection (2.8 miles north-east) and Sandown Castle (4.1 miles east). Green spaces nearby include Monk's Wall nature reserve.
Common problems we fix in Buttsole
Pallet-truck and forklift wheels concentrate weight on a tiny contact patch. Crossing an open joint, the wheel drops and knocks the opposite arris, and repeated impacts break the concrete away.
Things that normally lead to an enquiry:
- Saw-cut joints left open and packed with grit
- Drivers complaining about joints on a route
- Joint fill separating from the concrete
- Chipped and spalling edges along forklift routes
Business parks such as Birnham Farm Business Centre (to the north-west of Buttsole) have car parks, paved areas and long brick and panel elevations, all with movement joints.
What your quote should include
- Their pre-qualification and accreditations
- What level of public liability insurance do they hold?
- Who will actually carry out the work
- How they’ll work around occupants
Why it’s worth doing now in Buttsole
A floor coating laid over open joints soon cracks along the joint lines. The joints have to be filled or sealed as joints before or alongside any coating work. For buildings around smaller places like Buttsole, water damage can go unnoticed for longer, especially where a building isn’t used daily, so a failed joint can leak for a while before anyone sees it. Resealing early avoids that.
The specified product makes a difference, and so does the preparation, from cutting out to priming and backing rod. Access, phasing and site requirements come into it too.
Why clients in Buttsole choose us
- Clear, fixed quotes
- Joints cleaned back to sound surfaces
- CSCS-carded applicators
- CHAS accredited
See what affects the cost and our accreditations and insurance.