Industrial and floor joint sealing in Balfour, Orkney Islands
Floor joint sealing and filling in warehouses, factories and industrial units in Balfour. CHAS accredited, Constructionline member, with a 12-month guarantee on workmanship.
- Chipped and spalling edges along forklift routes
- A rough ride across broken joints
- Soft sealant dragged out of trafficked joints
Floor joint sealing for businesses in Balfour
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Floor joint sealing in Balfour
We have been sealing commercial joints since 2005. Our CSCS-carded applicators follow your site induction and rules, and the business is CHAS accredited and a Constructionline member holding public liability insurance. Finished floor joints in Balfour carry our 12-month guarantee. If you have joint fill separating from the concrete and trucks and loads jolting over damaged joints, we can help, on forklift and pallet-truck routes, joints along racking aisles and construction joints alike. For commercial sealant work in Balfour, you deal with one contact from quote to sign-off, for single jobs and planned programmes alike.
In smaller places such as Balfour, the joints we are asked about sit in workshops, farm sheds, schools and halls. Concrete slabs and yards there take vehicles and weather.
The 12-month guarantee is for workmanship rather than wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we spell out the cover before we begin.
- Place
- Balfour (KW17)
- Wider area
- Orkney Islands
- Guarantee
- 12 months on our workmanship
- Price
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
Slabs, ramps and loading bays in Balfour
Balfour sits close to the coast, within about 3 miles. Near the sea, external slabs, ramps and decks see salt air and driven rain as well as their usual loads, which is why split joints are worth sealing before the edges deteriorate. Being on an island, Balfour means planning around ferry times as well as the weather. Send joint sizes and details of the traffic so the right materials come on the crossing.
In and around Balfour, the right filler or sealant for each joint depends on the traffic and the movement it takes.
Balfour is about 4 miles north-east of Kirkwall, in the Orkney Islands. Balfour sits inside our coverage and the rest of the Orkney Islands, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. Our the Orkney Islands coverage takes in 51 places, from busy centres to rural villages.
Work on floor joints is covered throughout KW17, for business premises of every kind. Sites close to Balfour are covered too, including Kirkwall (4 miles south-west), Gorseness (5 miles north-west), Blackhill (5 miles south-west), Tankerness (6 miles south-east) and Isbister (6 miles west). Where a site is remote or on an island, travel and materials need planning ahead.
Around Balfour
Nearby you’ll also find Langskaill House (4.2 miles north-west) and Balfour Hospital (4.8 miles south-west). Not far away are Loch of Westhill and Ward of Gairsay.
Questions we’re asked in Balfour
Would you work within a site like Balfour Hospital?
Yes. We work in healthcare settings as well as offices and schools. Work is phased so departments keep running, under the site’s own rules.
Our building in Balfour is near the coast: does that change the sealant?
It can. Driven rain and salt are tougher on outside sealant than sheltered inland conditions. That puts more weight on product choice, primers where the manufacturer specifies them, and correct joint sizing.
Do you repair broken joint edges?
Filling against broken edges doesn’t last. If the arrises have spalled, we’ll say they need repair before filling and set out how that affects the job.
Will your applicators have CSCS cards?
Yes. Our applicators hold CSCS cards, which many sites require.
Do you work to architects’ specifications?
Yes. The specification and the manufacturer’s installation guidance are what we work to, and any queries are raised before we start.
Does the weather affect the work?
It can, for external work. Wet joints and cold, damp or frosty conditions stop the sealant bonding properly, so external work may be moved if conditions aren’t right. Internal work is far less affected.
When is resealing likely to be due?
There isn’t a single answer, since movement, weather, cleaning and use all affect it. Regular checks let you plan resealing before leaks or damage.
Building owners, agents and FMs in Balfour
Housing associations and managing agents often need work done across blocks and communal areas. Work can be phased so residents and staff keep access throughout, with each stage agreed with your site contact.
Building owners and managing agents use us on everything from one building to a spread of sites around Balfour. Several sites can go on one quote, which keeps the paperwork simple.
Doing it in-house
Using site staff can make sense for a small touch-up, but anything bigger is another matter: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
General builders and handymen seal joints, but it isn’t their main trade. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint, which is what makes a joint last.
Surface by surface
Isolation joints at walls and columns
Joints around columns and along walls let the slab move without cracking against the structure. Something flexible normally suits them, not a stiff filler.
Saw-cut induced joints
Saw cuts are made soon after the slab is cast so shrinkage cracks follow a line. They start narrow and widen as the concrete dries, and on truck routes they need a filler that supports the edges.
On site: what to expect
Before we leave any area, the masking comes off, the area is cleaned and every joint is checked, ready for your sign-off. If an area should be left alone while the sealant cures, we say how long and put signs out. Where we can, we combine work around Balfour with other jobs nearby, to make the most of each trip. Let us know if your dates have any give.
- We agree the traffic routes and phasing with your site team.
- Any joints with broken edges are flagged before work starts.
- We clear each run back to clean concrete.
- The chosen filler or sealant goes in flush with the slab.
- Each area is handed back when ready for traffic.
Preparing the site
- Send asbestos survey details if the building is pre-2000
- Have the specification and drawings to hand
- Tell us what induction or permit system the site runs
Request a quote
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. The first step is to call 01277 525 020 or email drawings and photos with what you know.
Related advice
Other services in Balfour
What we are called out for in Balfour
Concrete slabs shrink as they dry out, and the saw cuts are there so it cracks in straight, controlled lines. Each panel pulls back as it shrinks and the joints open up, and a filler placed early can part company with one face.
These are often picked up first by site or facilities staff:
- Failing joints at loading bays and dock doors
- Untidy open joints in a retail unit
- A rough ride across broken joints
- Broken arrises where pallet trucks cross
For an estate such as Balfour Hospital, 4.8 miles to the south-west of Balfour, the joints in ramps, decks and long building elevations all need attention over time.
Comparing quotes
- Will RAMS and insurance details be available?
- Health and safety accreditation such as CHAS
- Do they follow the manufacturer’s priming guidance?
- What the guarantee covers, and for how long
What happens if it’s left?
Waiting for a site-wide shutdown often means the joints keep getting worse. Phased in zones, the busiest routes can be treated first and the remainder follows on a plan that suits you. Exposed buildings in Scotland take a lot of weather, so it’s worth renewing joints around Balfour before they leak.
The specified product makes a difference, and so does the preparation, from cutting out to priming and backing rod. Access, phasing and site rules also count.
Why appoint us
- Commercial sealant work since 2005
- Joints cleaned back to sound surfaces
- Public liability insurance in place
- A Constructionline member, so easy to vet