Tingwall floor joint sealing
Our CSCS-carded applicators take on floor joint sealing and filling in warehouses, factories and industrial units in Tingwall. Send photographs or drawings for a fixed quote.
- Flexible sealant torn out by wheels
- Cracked and crumbling joint fill
- Drivers complaining about joints on a route
Need floor joint sealing in Tingwall?
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Doing it in-house
Some joints are best left to specialists: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. A poor seal in places like these tends to cost more to put right later.
The visible bead is only part of the job. Backing rod, primer where specified and a joint designed to move with the building are easy to get wrong without experience.
How we handle floor joint sealing in Tingwall
Across Tingwall and the rest of the Orkney Islands, it runs the same way: send details, get a fixed quote, we seal, and the work is guaranteed. Approximate joint lengths, a few photographs and a floor plan are enough for a quick quote, or we can arrange a site visit. Most enquiries involve unfilled floor joints collecting dirt and grit and sealant pulled out along a truck route, across saw-cut induced joints, forklift and pallet-truck routes and joints along racking aisles. Whoever orders the work in Tingwall, the brief is usually the same: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
Weather windows decide external joint work around a place like Tingwall: sealant needs a dry joint and a temperature within its range. Internal floors can be done whenever suits the site.
What our 12-month guarantee covers is the way we did the job: preparation, application and finish. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.
- Location
- Tingwall (KW17)
- Region
- Orkney Islands
- Guarantee
- 12 months on our workmanship
- Price
- A fixed quote before we start
- Call
- 01277 525 020
- Updated
- 3 November 2026
When it isn’t the sealant
Some faults sit outside our scope, and we say so rather than covering them up:
- Spalled arrises, which need an edge repair first
- Unstable slabs moving under traffic
- Damaged or worn floor coatings and screeds
If you’re not sure, just give us a call on 01277 525 020 or send photos by email and we’ll give you a straight answer before you book.
Surfaces we seal
- Forklift and pallet-truck routes
- Joints along racking aisles
- Retail and showroom floors
- Saw-cut induced joints
- Loading bays
- Construction joints
What the job involves on each surface
Isolation joints at walls and columns
Where racking or plant sits near column joints, access is agreed before we start.
Semi-rigid joint fillers
For trafficked warehouse joints, semi-rigid fillers are common. They are installed to the depth the manufacturer specifies and finished flush.
Traffic, movement and joints around Tingwall
The sea is no more than about 1 mile from Tingwall. Open joints in coastal car parks and yards let in salt-laden water as well as grit, so a failed joint lets more in and the edges break up sooner. The east of Scotland, where Tingwall is, gets less rain than the west. Freezing weather and salt still attack open external joints. Sealing them in drier months limits winter damage.
Around Tingwall, open joints collect water and debris, and the arrises are the next to go.
Tingwall is about 8 miles north-west of Kirkwall, in the Orkney Islands. If you’re looking for floor joint sealing in Tingwall, we can help. Across the Orkney Islands, 51 places are covered, Tingwall among them.
Work on floor joints is covered throughout KW17. Sites close to Tingwall are covered too, including Gorseness (2 miles south-east), Isbister (3 miles south), Evie (3 miles north-west), Norseman (3 miles south-west) and Settiscarth (3 miles south-west). Remote and island addresses take more planning, from travel and ferries to the weather, so give the site location in your enquiry.
What’s near Tingwall
Well-known places in the area include Langskaill House (2.3 miles east). Green spaces nearby include Loch of Brockan and Hammars Hill.
Also in Tingwall
Do you need floor joint sealing in Tingwall?
Loading bay joints are exposed to wind, wet tyres and bigger temperature swings, as well as the tightest turning loads. They are often the first on a site to break down.
Most enquiries start with one or more of the following:
- Joint fill separating from the concrete
- Sealant pulled out along a truck route
- Trucks and loads jolting over damaged joints
- Grimy joint lines spoiling a showroom floor
For floors and slabs around Tingwall, the product is chosen for the traffic and the movement at each joint.
What your quote should include
- Their plan for phasing and protecting the area
- Whether old or failed sealant will be cut out, not overlaid
- What the guarantee covers, and for how long
- The named product and why it was chosen
From enquiry to sign-off
A typical day starts with protection: tape along each joint edge and covers over finishes, stock and equipment close by. The work itself usually takes a day or more, depending on the metres of joint and how many zones the floor is split into, and we clear our waste as we work. For a building near Tingwall, directions, keys and a contact on the day are worth sorting early. We will confirm the plan with the fixed quote.
- We look at joint widths, edge condition and the traffic on each route.
- You get a fixed quote with the product and the phasing set out.
- Each joint is cleared of old fill and dirt and taken back to clean, sound edges.
- Dust is sucked out of the joint and a primer used if the product data sheet asks for one.
- We fill each joint to depth and finish it flush so wheels roll straight across.
- Each phase reopens when the product is ready for wheels, then we start the next.
What we need from you
- Send asbestos survey details if the building is pre-2000
- Tell us what induction or permit system the site runs
- Confirm the product named in the specification
Getting a fixed quote
A handful of photographs and a postcode is the fastest way to a quote. Send them through the quote form, or ring 01277 525 020 or email a schedule or drawings if you’d rather talk the job through.
Read more
Your questions answered
Does a coastal location like Tingwall affect which sealant is used?
It can. Wind-driven rain and, closer to the shore, salt air are harder on external joints. That puts more weight on product choice, primers where the manufacturer specifies them, and correct joint sizing.
Does a site in Tingwall have to shut while its joints are sealed?
In the majority of cases the site keeps working. Joints are done in phases, a bay, aisle or deck at a time. We agree the sequence and timings with you before we start.
What guarantee do you give on joint filling?
Our workmanship carries a 12-month guarantee and the work is covered by public liability insurance.
Should floor joints be filled or sealed?
It depends on the traffic and the movement. Trafficked joints on truck routes normally need a semi-rigid filler to support the edges, while joints that move more take a flexible sealant.
Do you have public liability insurance?
Yes. We’re fully insured, including public liability cover.
Can the warehouse stay open while you work?
In the majority of cases, just the area being treated is coned off. Each zone reopens when the product can take traffic and the next zone follows.
Will your applicators have CSCS cards?
Yes. Should the site need card details in advance, tell us and we’ll confirm them with the quote.
Cost factors for floor joints
Quotes vary with the job. Expect it to depend on:
- Whether the work must be split into stages
- Induction, permit and paperwork requirements
- Access and working height
- Whether old sealant has to be cut out first
Quantities, awkward access and phased working all shape the price. So do site requirements such as inductions and permits, along with the time of year for external work.
Details that help us quote
We can often quote from photos and a few details. It helps to include:
- The asbestos register, for older buildings
- What the building is and how it’s used
- Approximate linear metres or a joint schedule
- Any dates the work must fit around
Send details, get a quote, we seal, guaranteed: that’s how every job runs. To take the first step, call 01277 525 020 or use the quote form.