Industrial and floor joint sealing in Ardler, Perth and Kinross
Floor joint sealing and filling in warehouses, factories and industrial units throughout Ardler and nearby, carried out by CSCS-carded applicators. CHAS accredited and fully insured.
- Loading bay joints breaking down
- Grimy joint lines spoiling a showroom floor
- Trucks and loads jolting over damaged joints
Floor joint sealing across Ardler
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
How we handle floor joint sealing in Ardler
For sites in Ardler and across Perth and Kinross, the process is short: send details, get a fixed quote, we seal, and the work is guaranteed. A rough length of joint, photographs of the worst areas and a site plan let us give a quick quote, or we can arrange a site visit. Site teams most often ask us about sealant pulled out along a truck route and a gap opening alongside old joint filler, across construction joints, joints along racking aisles and loading bays. Whether you call it commercial sealant work, mastic application or joint sealing, the work in Ardler is the same: failed joints cut out, faces prepared and the right sealant laid to the right depth.
Around smaller Scottish places like Ardler, slabs needing attention are often in agricultural buildings, workshops, schools and hotels. Slabs and yards take vehicles, rain and frost.
A 12-month guarantee applies to all our work. Should something we installed fail, call 01277 525 020 or send photos by email and we will come back to it.
- Location
- Ardler (PH12)
- Region
- Perth and Kinross
- Cover
- 12 months on our workmanship
- Price
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
Ardler: questions and answers
Is hospital work, at somewhere like Blairgowrie Community Hospital, something you do?
Yes, provided the work is planned with the site’s estates team. Each area is agreed with the ward or department and the estates team in advance.
Is Ardler too small for you to travel to?
Not at all. Ardler is within our area. Every Scottish council area is within our area. Send photos and a list of what needs doing, and we’ll plan the job to need as few trips as possible.
Do you repair broken joint edges?
We check the edges as part of the survey. Where they have broken away, we’ll tell you before quoting the filling, so nothing is filled that won’t hold.
Can you follow the specification on our project?
Yes. We follow the specification, along with the manufacturer’s installation guidance, and we raise anything unclear before work begins.
When can forklifts run over new joint filler?
Each product has its own cure time, and cold floors slow it down. Phasing is planned with that in mind.
How long does a job like this take?
It depends on the scope, but the work typically takes anything from a day for one loading bay to several days for a large floor, split into phases. Larger or phased jobs take longer, and we’ll give you a timescale with the quote.
Is colour matching possible?
It depends on the product specified. Some ranges are wide, others limited, so the available colours are confirmed with the quote.
From enquiry to sign-off
Diagnose, treat, sign off: every visit follows that pattern. We inspect the joints and confirm what’s in scope, then the work is carried out to the specified product and detail, and we finish with a walk round so the work can be signed off. Tell us who will meet us and how to get in at your building near Ardler. We’ll confirm the plan with the fixed quote.
- We agree the traffic routes and phasing with your site team.
- We point out joints whose edges need repairing first.
- Failed material and debris are removed and the joint cleaned.
- The chosen filler or sealant goes in flush with the slab.
- Each area is handed back when ready for traffic.
Getting the site ready
- Send any specification or drawings in advance
- Arrange parking or a loading space
- Share the asbestos register for older buildings
Get a fixed quote
Quotes are fixed against the scope you send, so you know the figure before anyone is on site. To start the process, speak to us on 01277 525 020 or email the details over.
Read more
Places near Ardler
What else we do in Ardler
What happens if it’s left?
Dirt and spillage gather in open joints where scrubber-driers can’t get it out. Where the floor is on show or needs to be kept clean, that is a problem. Flush, filled joints leave nothing for cleaners to dig out. Renewing every failing joint on one visit is the sensible approach for a place like Ardler. Send photos and we’ll quote for everything together.
We don’t publish prices, because the scope varies so much from one building to the next. Call for a quote.
Why us?
- Work to your specification and the manufacturer’s guidance
- 12 months’ guarantee on every job
- One phone line for London, the South East and Scotland
- Old sealant cut out, never sealed over
Take a look at how commercial sealant jobs are priced or our accreditations and insurance.
What sets the cost
Each job is priced on its own details. The things that drive the figure:
- Any access equipment needed
- Site requirements such as inductions and permits
- Working within restricted access windows
- Location, for remote and island sites
Pricing floor joints depends on quantities, condition and access. Ask us for a fixed quote.
What we need to price the job
There’s no need for a formal survey. A few details are enough to get going:
- Anything awkward about access or site hours
- Whether the building will be occupied during the work
- Where the site is, with the postcode
- When you need the work done
Every quote starts with the facts: what’s there, how much of it, how we reach it and what’s specified. Share whatever details you have and we will fill any gaps with a visit.
Building owners, agents and FMs in Ardler
Building owners and managing agents use us on sealant work across single buildings or whole portfolios around Ardler. Several sites can go on one quote, so there’s one set of paperwork to deal with.
We take on planned maintenance as well as one-off repairs: working through a building or an estate in stages that fit your budget. Ardler can form part of a wider programme.
Honest limits
We check first that sealant really is the fix. It isn’t the answer for:
- Worn screed or surface finishes
- Level or flatness problems across the floor
- Spalled arrises, which need an edge repair first
If you are not sure, just call 01277 525 020 or email drawings and photos and we’ll give you a straight answer.
Surfaces we seal
- Saw-cut induced joints
- Joints along racking aisles
- Loading bays
- Forklift and pallet-truck routes
- Retail and showroom floors
- Construction joints
Slabs, ramps and loading bays in Ardler
The east of Scotland, where Ardler is, gets less rain than the west. Cold winters and gritting are hard on any yard or deck joint left open. Resealing before the cold months helps protect the edges.
For an estate such as Blairgowrie Community Hospital (5.9 miles west of Ardler), the joints in ramps, decks and long building elevations all need attention over time. In and around Ardler, the right filler or sealant for each joint depends on the traffic and the movement it takes.
Ardler is about 6 miles east of Blairgowrie and Rattray, in Perth and Kinross. Our applicators travel to Ardler for work on floor joints, handled exactly as we handle every other area. Ardler is one of 114 places we cover in Perth and Kinross for floor joints. For work in that direction, see our Dundee page (10 miles or so).
Commercial sites across PH12 are covered. For a building on Main Street, Wallace Street and Cartwright Place or nearby, we can quote for floor joints. Close to Ardler, our area also takes in Meigle (2 miles north-east), Newtyle (2 miles east), Markethill (3 miles south-west), Coupar Angus (3 miles south-west) and New Alyth (4 miles north-west). Further afield, our area takes in Perth (15 miles south-west), Blairgowrie and Rattray (6 miles west), Scone (13 miles south-west), Tulloch (15 miles south-west), Rattray (5 miles west) and Stanley (11 miles south-west).
Near you in Ardler
Other landmarks nearby include Belmont Castle (1.7 miles north-east) and Blairgowrie Community Hospital (5.9 miles west). Not far away are Long Loch and Newtyle Hill.
Doing it in-house
For most general trades, sealant is a sideline. A specialist prepares properly, controls joint depth and picks a product with the right movement class, which is what makes a joint last.
What you see is the finished bead, but most of the work is hidden. Backing rod, primer where specified and a joint designed to move with the building are easy to get wrong without experience.