Expansion and movement joint sealing in Ardler, Perth and Kinross
Expansion and movement joint sealing in walls, decks and floors across Ardler, carried out by CSCS-carded applicators. Fully insured and CHAS accredited.
- Previous reseals laid over old sealant
- Damp inside where a wall movement joint has failed
- Sealant peeling off one face of the joint
Expansion joint sealing near Ardler
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Expansion joint sealing for commercial buildings in Ardler
A movement joint only works while its seal does. Once it fails, water, grit and debris get in, the joint can’t close properly and its edges begin to crumble. Dealt with early, it stays a sealant job rather than a concrete or masonry repair. Most enquiries involve brittle, chalky sealant on external joints and spalled or broken joint edges in floors and decks, on cladding panel joints, brickwork movement joints and precast concrete panel joints. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: on jobs in Ardler, preparation and product choice get the time they need.
Travel to smaller places like Ardler is planned so the work is done in one trip where possible. Send photos, joint widths and details of the traffic first.
Guaranteed is the last step of every job. Our workmanship is backed for 12 months, and we explain exactly what that covers when we quote.
- Where
- Ardler (PH12)
- Wider area
- Perth and Kinross
- Guarantee
- A 12-month guarantee
- Quote
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Updated
- 3 November 2026
Cost factors for movement joints
To price the job, we consider:
- Distance, for remote addresses
- How much there is to seal
- Induction, permit and paperwork requirements
- Which sealant the job calls for
The product called for affects the cost, as does the preparation each joint needs, such as cutting out, priming or new backing rod. Access, phasing and site requirements come into it too.
Sending details for a quote
Good information means a firmer quote. Helpful details to send:
- The product your specification calls for
- The postcode of the building
- Rough lengths or quantities, or drawings if you have them
- The type of building and who uses it
A good quote starts with a clear picture: what’s there, how much of it, how we reach it and what’s specified. Send what you have, and we’ll arrange a site visit if anything is unclear.
Warehouse floors and decks around Ardler
Being in the east of Scotland, Ardler gets less rain than the west coast. Frost and winter road salt still work into open joints in car parks and yards. Resealing before the cold months helps protect the edges.
Around Ardler, each joint gets a filler or sealant matched to what crosses it and how much it moves.
Ardler is about 6 miles east of Blairgowrie and Rattray, in Perth and Kinross. Anywhere in PH12, it works the same way: details in, fixed quote out, then sealing and a 12-month guarantee. Across Perth and Kinross, 114 places are covered, including Ardler. There’s a separate page for Dundee, about 10 miles away.
If you need expansion joint sealing in PH12, the process matches everywhere else we work: send details, get a quote, we seal, guaranteed. Buildings on Main Street, Wallace Street and Cartwright Place are within our area. Close to Ardler, our area also takes in Meigle (2 miles north-east), Newtyle (2 miles east), Markethill (3 miles south-west), Coupar Angus (3 miles south-west) and New Alyth (4 miles north-west). A short drive away, we cover Perth (15 miles south-west), Blairgowrie and Rattray (6 miles west), Scone (13 miles south-west), Tulloch (15 miles south-west), Rattray (5 miles west) and Stanley (11 miles south-west).
Near you in Ardler
Other landmarks nearby include Belmont Castle (1.7 miles north-east) and Blairgowrie Community Hospital (5.9 miles west). Open spaces near Ardler include Long Loch and Newtyle Hill.
Our process
We follow your site rules from the start: signing in, inductions and any permit to work. With the paperwork done, we take the joints in the sequence agreed with you, and each area is checked before we leave it. Where we can, we combine work around Ardler with other jobs nearby, to make the most of each trip. Let us know if your dates have any give.
- Photos, joint lengths and drawings come to us, or we visit.
- We compare each joint’s width with the movement and the sealant’s capability, and flag anything that needs an engineer.
- Every joint is cleared of the failed seal and any grit packed into it.
- Edges are checked, and we tell you if any need repairing before sealing.
- A sealant suited to the movement and traffic is laid to depth and tooled.
- Each area is handed back after its cure time, under our 12-month guarantee.
Getting the site ready
- Point out any areas we must not close
- Send asbestos survey details if the building is pre-2000
- Tell staff and tenants when we’ll be in
Request a quote
Pricing a project or setting a maintenance budget? We’ll quote against your scope and drawings you can plan around. If you have questions first, give us a call on 01277 525 020 or send photos by email.
Related advice
Maintenance after handover
Keep the joints in good shape with a few simple steps:
- Treat a small split as a warning, not a cosmetic issue
- Include every elevation and deck joint in periodic inspections
- Inspect exposed joints once the cold weather has passed
- Plan racking layouts so feet don’t land on a joint
Every joint we seal is backed by a 12-month guarantee on workmanship. Record which product went into which joints in the building file.
Rain gets into walls through torn brick and block movement joints. The first sign is often a damp patch indoors by which time the joint has been open for a while. Resealing promptly prevents internal damage.
Do you need expansion joint sealing in Ardler?
Weathering wears down sealant on exposed elevations and decks. In time the bead chalks, stiffens and cracks.
It’s worth sending us details if you spot any of the following:
- New sealant over old, now failing
- Brittle, chalky sealant on external joints
- Debris jammed in movement joints
- Spalled or broken joint edges in floors and decks
Hospital campuses such as Blairgowrie Community Hospital, 5.9 miles west of Ardler, grow in stages, leaving movement joints wherever new blocks meet old.
What your quote should include
- What level of public liability insurance do they hold?
- Are they CHAS accredited or on Constructionline?
- Who will actually carry out the work
- Will RAMS and insurance details be available?
Honest limits
Being straight saves everyone time. New sealant won’t cure:
- Cracking or settlement that calls for an engineer’s assessment
- Broken or spalled joint edges, which need repairing before any sealant goes in
- Failed waterproofing membranes on podiums, roofs or decks (a waterproofing specialist’s job)
If you are not sure, just phone 01277 525 020 or use the quote form and we’ll give you a straight answer before you book.
Surfaces we seal
- Cladding panel joints
- Car park decks and ramps
- Brickwork movement joints
- Blockwork control joints
- Precast concrete panel joints
- Podiums and floor movement joints
Places near Ardler
Also in Ardler
Common questions from Ardler clients
Is Ardler too small for you to travel to?
No. Places such as Ardler are covered as much as the big towns. We work across every Scottish council area. Where we can, we group nearby jobs to make the most of each trip.
Can you work on a hospital site such as Blairgowrie Community Hospital?
Yes, healthcare and care buildings are part of our work. We follow the site’s permits, sign-in and infection-control procedures in every area.
How do you deal with asbestos in old sealant?
Asbestos is possible in some older mastics, particularly in buildings from before 2000. We check the asbestos register before cutting out old sealant in an older building, and work stops until any suspect material has been tested. We don’t remove asbestos-containing materials.
Can you seal joints in cold or wet weather?
Sealant needs a dry joint and a temperature within the product’s range. Cold, damp or frosty mornings can stop work outside so external dates keep some flexibility.
Do the joint edges need to be sound before sealing?
Sealant needs sound faces to bond to, so we will tell you if the edges need repairing before sealing. We flag it at the quote stage where we can see it.
Is movement joint sealing guaranteed?
Our workmanship on movement joints carries a 12-month guarantee. The guarantee covers how we sealed, not damage caused afterwards.
Are you CHAS accredited and on Constructionline?
Yes. CHAS accredited, Constructionline member, and our applicators hold CSCS cards.
Why it’s worth doing now in Ardler
Doing joint resealing alongside other planned works can save on access. Leaking joints need sealing now. Urgent joints now, the rest later, is often the sensible plan. Buildings that aren’t in daily use, such as halls and seasonal premises, may let water in unnoticed, so a failed joint has time to cause damage. Early resealing prevents it.
The price depends on the quantity of joints, how much old material needs removing and how the joints are reached. Call for a quote when you’re ready.
Why clients in Ardler choose us
- Colours chosen to suit frames, cladding or finishes where possible
- Fully insured, including public liability cover
- 12 months’ guarantee on every job
- Old sealant cut out, never sealed over
Read how commercial sealant jobs are priced and our accreditations and insurance.