Fire stopping in Tarland
Fire stopping in Tarland, backed by over 20 years in commercial sealing. Fully insured and CHAS accredited.
- Openings left by services added after handover
- Unsealed joints where partitions meet the slab
- Expanding foam used as fire stopping
Fire stopping for Tarland sites
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Fire stopping for commercial buildings in Tarland
The test standards are BS EN 1366-3 for penetration seals and BS EN 1366-4 for linear joints and the results are classified to BS EN 13501-2. That classification, such as EI 60 or EI 120, belongs to the product in its tested arrangement. So our job is to reproduce that arrangement faithfully. Site teams most often ask us about fire seals cut back for extra cables and never reinstated and non-fire-rated filler around services, across small duct penetrations where the tested detail allows, linear gaps at wall heads and cable penetrations. Whether you call it commercial sealant work, mastic application or joint sealing, in Tarland it comes down to the same thing: failed joints cut out, faces prepared and the right sealant laid to the right depth.
Travel to smaller places like Tarland is planned so every penetration is sealed on one trip. Photos of the gaps, the services and the wall or floor type help us bring the right products.
The 12-month guarantee covers our workmanship: preparation, application and finish. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.
- Where
- Tarland (AB34)
- Region
- Aberdeenshire
- Cover
- 12 months on every job
- Price
- Quoted before any work starts
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Maintenance after handover
Every sealant joint needs some looking after, and their life depends on movement, exposure, cleaning and use. Our advice:
- Don’t let anyone top up a fire seal with the wrong product
- Record which product was used where
- Treat an open penetration as a priority repair
- Settle who seals which penetrations at the start of a project
Keep the product data and installation details with the building’s fire safety information. It makes later repairs much easier to match.
Looking at service areas on a regular cycle pays off. A cracked or disturbed seal found early is a small job compared with dozens found at once.
From enquiry to sign-off
We begin with a short walk round with whoever looks after the building, agreeing which joints are in scope, where to start and what must stay open. After that, any old or failed material is removed, each joint is prepared and the new sealant goes in. For a building near Tarland, directions, keys and a contact on the day are worth sorting early. That goes into the plan alongside the quote.
- First we go through the drawings, schedule or specification for the seals and raise any questions before we price.
- On site, each opening is checked against the tested detail it is meant to follow.
- Unsuitable fillers and loose debris are taken out of each opening.
- We fit the backing the detail asks for, to the stated depth.
- We apply the specified sealant to the depth and around the services as the detail shows.
- If an opening needs something other than sealant, we tell you instead of improvising.
Preparing the site
- Share the asbestos register for older buildings
- Tell us what induction or permit system the site runs
- Have the specification and drawings to hand
Request a quote
Every quote starts with the facts: what’s there, how much of it, how we reach it and what’s specified. Share whatever details you have and we will fill any gaps with a visit.
Advice
What sets the cost
The price varies from site to site. Expect it to depend on:
- How accessible the joints are
- How much existing material needs removing
- The total length or number of joints
- Which sealant the job calls for
The work involved drives the cost: stripping out, preparation, sealing, access and phasing. Call for a quote.
What we need to price the job
Whether it’s one area or a whole building, the same details help:
- Where the site is, with the postcode
- Any dates the work must fit around
- The asbestos register, for older buildings
- Drawings or a marked-up plan, if available
Let us know the site, the scope and your timescale, and a fixed quote will follow. To get it moving, call 01277 525 020 or email us.
Common questions from Tarland clients
Can you seal penetrations in a hotel in Tarland after a refit?
Yes, to the specification and the product’s tested detail. Each seal follows the tested detail, and rooms are done in turn.
Do you take on work at healthcare sites like Aboyne Hospital?
Yes, healthcare and care buildings are part of our work. The estates team’s permit system and infection-control rules come first, and the work is planned around them.
Can the sealant be colour-matched?
It depends on the product. Some ranges offer many colours, others very few, so we will confirm the colours available for the specified product with the quote.
Can you send site paperwork?
Requirements differ from site to site, so tell us what you need and we will confirm it when we quote.
How do I request a quote?
There are four steps: send details, receive a fixed quote, we carry out the work, and it’s guaranteed. The first step only needs photos and a postcode.
Do you take on small jobs?
Small jobs are welcome alongside larger packages. Send details for a fixed quote.
When can the area be used after sealing?
That comes down to the sealant and the temperature. Some products skin over quickly but need longer to cure fully, so we will confirm the curing time on the day.
Building owners, agents and FMs in Tarland
Hotels, schools, healthcare sites, offices and retail units book us directly too. The work is planned around how the building runs, so the building keeps working while we do.
We work for building owners and managing agents on sealant work across single buildings or whole portfolios. One quote can cover more than one site, so there’s one set of paperwork to deal with.
Why act early in Tarland
Fire stopping is a regular point raised at inspections and handover. Late discoveries can delay handover while openings are reopened and resealed which is why earlier is better. Exposed buildings in Scotland take a lot of weather, and for a smaller place like Tarland, a repair visit takes planning, so it’s better to act early.
We don’t publish prices, since every building and every scope is different. Call for a quote and we will price your job on its own details.
Why us?
- Fixed quotes based on photographs, drawings or a visit
- Over 20 years of commercial sealing
- Fully insured, including public liability cover
- Health and safety: CHAS accredited
Take a look at our cost guide or our accreditations.
Other services in Tarland
Fire-rated sealing for Tarland buildings
Scottish guidance (non-domestic Technical Handbook, clause 2.1.14) asks that penetrations match at least the fire resistance period of the element they pass through, with products tested for that end use. Our part is installing the specified fire-rated sealant to its tested detail. A 2-mile radius around Tarland takes in a number of hotels. Hotels are divided into compartments, and refurbishments that add pipes and cables through bedroom and corridor walls leave gaps to close.
Theatres, wards and plant rooms at sites like Aboyne Hospital (5 miles south-east of Tarland) all have compartment walls crossed by services. For a hotel such as The Commercial Hotel, less than half a mile to the south of Tarland, penetration seals are worth checking after any refit or services upgrade. For a building such as Tarland Old Parish Church, new heating or data runs are the usual reason penetrations need sealing.
Tarland is about 21 miles south-west of Inverurie, in Aberdeenshire. Looking for fire stopping in Tarland? We can help, as we do across Aberdeenshire. Our Aberdeenshire coverage takes in 179 places, from busy centres to rural villages. Sites around Aberdeen have their own page, roughly 28 miles from Tarland.
We take on service penetrations across the AB34 postcode area, whatever the building. Buildings on Market Stance, The Square and Melgum Road are within our area. Sites close to Tarland are covered too, including Dinnet (4 miles south), Aboyne (4 miles south-east), Birsemore (5 miles south-east), Towie (6 miles north-west) and Lumphanan (6 miles east). A short drive away, we cover Banchory (15 miles east), Alford (9 miles north-east), Ballater (9 miles south-west) and Torphins (9 miles east).
Landmarks near Tarland
Well-known places in the area include Aboyne Hospital (5 miles south-east) and Coull Castle (2.4 miles south-east). For a walk, there’s Craiglich and Loch Davan.
Honest limits
A few problems need another trade or a different fix, and we point that out rather than sealing over them:
- Gaps in walls that were never built as compartment walls
- Deciding what a wall or floor needs, which belongs to the designer
- Fire risk assessments, a job for a competent assessor
Not sure which it is? You can call 01277 525 020 or use the quote form and we’ll tell you honestly.
Surfaces we seal
- Linear gaps at wall heads
- Small duct penetrations where the tested detail allows
- Joints between fire-resisting walls and floors
- Cable penetrations
- Service gaps in risers
- Pipe penetrations