Fire stopping in Birsemore
Fire-rated and intumescent sealing of service penetrations and linear gaps throughout Birsemore and nearby, carried out by CSCS-carded applicators. CHAS accredited and fully insured.
- Seals that don’t match their tested detail
- Damaged fire seals in risers and voids
- Head-of-wall gaps with no fire seal
Fire stopping for businesses in Birsemore
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
When something else is needed
Some faults sit outside our scope, and we say so rather than covering them up:
- Writing the fire-stopping specification
- Construction that lacks the fire resistance the seal relies on
- Issuing fire ratings or certificates for seals
Not sure which it is? You can ring 01277 525 020 or send photos by email and we will tell you honestly.
What we seal
- Pipe penetrations
- Service gaps in risers
- Joints between fire-resisting walls and floors
- Linear gaps at wall heads
- Small duct penetrations where the tested detail allows
- Cable penetrations
Fire stopping in Birsemore, done properly
Facilities managers in Birsemore often find open service penetrations when ceilings come down for other work. If a specification already covers those walls and floors, we can reseal to it using the product and detail it sets out. Where there isn’t one, the designer or fire engineer needs to set one first. The enquiries we see most involve snag lists that include open service penetrations and builders’ foam or ordinary silicone in compartment walls, on linear gaps at wall heads, small duct penetrations where the tested detail allows and joints between fire-resisting walls and floors. Looking for mastic applicators who cover Birsemore? Mastic Doctor has worked for contractors, FMs and building owners since 2005.
For a building near Birsemore, we plan fire-rated sealing so it’s finished in one visit where possible. Photos of the gaps, the services and the wall or floor type help us bring the right products.
Our workmanship is guaranteed for 12 months, wherever the site is. If our installation lets you down in that time, we return and fix it.
- Location
- Birsemore (AB34)
- Wider area
- Aberdeenshire
- Guarantee
- A 12-month guarantee
- Quote
- A fixed quote before we start
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Should maintenance staff do it?
General builders and handymen seal joints, but it isn’t their main trade. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint.
Certain joints really need a specialist: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. A poor seal in places like these tends to cost more to put right later.
Your questions answered
How do Scotland’s building standards affect fire-rated sealant in Birsemore?
The non-domestic Technical Handbook, clause 2.1.14, expects a penetration to keep at least the wall or floor’s fire resistance period, with proprietary products tested for the use they’re put to. Design sits with the designer and the verifier; installation to the tested detail is our part.
Do you take on work at healthcare sites like Aboyne Hospital and Health Centre?
Yes. Healthcare sites are among the places we work. The estates team’s permit system and infection-control rules come first, and the work is planned around them.
Is any job too small?
Small jobs are welcome alongside larger packages. Photos and a description are enough to start.
Is the work guaranteed?
Yes. Workmanship is guaranteed for 12 months on every job.
How much does the work cost?
That depends on the job: the volume of work, the access, the specified product and how it’s phased. Call for a fixed quote and we will price it properly.
Will your applicators have CSCS cards?
Yes. Should the site need card details in advance, let us know and we will send them with the quote.
Can you work to our specification?
Yes. Include it with the drawings when you ask for a quote, and we will price the work to it.
Other services in Birsemore
Diagnose, treat, sign off
At the end of each section, the masking comes off, the area is cleaned and every joint is checked, ready for your sign-off. Where the sealant needs time to cure before use, we tell you and sign the area. Where we can, we combine work around Birsemore with other jobs nearby. Let us know if your dates have any give.
- The specification and schedule come first, so we know which details apply.
- We plan the sequence of floors, risers and voids with you.
- We compare every service penetration with its tested detail before sealing.
- Foam, ordinary sealant and debris come out first.
- Backing and fire-rated sealant are installed to the detail and tooled.
- Anything outside the detail is reported to you rather than sealed.
What we need from you
- Tell us which areas need to stay in use
- Send asbestos survey details if the building is pre-2000
- Confirm the product named in the specification
Get a fixed quote
We quote a fixed sum against the scope you give us, so you know the figure before anyone is on site. To start the process, speak to us on 01277 525 020 or email us.
Related advice
When to call us in Birsemore
Damage plays a part too. Maintenance work can knock a seal, cut it back for an extra cable or remove it with an old pipe.
Typical triggers for a call:
- Non-fire-rated filler around services
- Hidden openings found during inspections
- Unsealed joints where partitions meet the slab
- Openings left by services added after handover
Older community buildings such as St Machar's Parish Church that have been rewired or given new heating can have service gaps through walls worth checking against the specification.
Before you book anyone
- Do they follow the manufacturer’s priming guidance?
- How they handle RAMS and site documents
- Health and safety accreditation such as CHAS
- Will failed sealant be removed rather than covered?
Different surfaces, different methods
Metal pipes
Copper and steel pipes are a common service penetration for fire-rated sealant. Pipe diameter, annular gap, sealant depth and any pipe insulation all have to match the detail.
Masonry and concrete
Openings through concrete vary from tidy cores to rough break-outs. Each gap is measured where it is widest against the detail’s limits, and any that don’t are flagged.
Leave it or put it right?
An open or wrongly sealed service penetration lets fire and smoke reach the next compartment much sooner than the building was designed for. Putting it right is typically a modest job when the openings are accessible. Wait until ceilings close or areas are occupied and the same work becomes harder to reach. Exposed buildings in Scotland take a lot of weather, and for a smaller place like Birsemore, a repair visit takes planning, so it’s better to act early.
We don’t publish prices, because the scope varies so much from one building to the next. For a fixed figure, call for a quote.
Why choose Mastic Doctor in Birsemore
- Sealing commercial buildings since 2005
- Constructionline member for supplier checks
- Workmanship guaranteed for 12 months
- Joints cleaned back to sound surfaces
Take a look at our cost guide and how we’re accredited.
Compartment walls and floors in Birsemore
Scotland has its own building standards: the non-domestic Technical Handbook (clause 2.1.14) says service penetrations should be fire stopped to at least the fire resistance duration of the wall or floor, and products should be tested for their end use. Where fire-rated sealant is specified, that’s what we install, to the tested detail.
For a unit at a site such as Aboyne Industrial Estate (0.8 miles north-east of Birsemore), new power or data runs between office and warehouse can breach a compartment wall. Hospital estates such as Aboyne Hospital and Health Centre, 0.9 miles to the north-east of Birsemore, are divided into fire compartments, and any service penetration through them should be sealed to the specified, tested detail.
Birsemore is about 11 miles west of Banchory, in Aberdeenshire. If you are looking for fire stopping in Birsemore, we can help, as we do across Aberdeenshire. 179 places across Aberdeenshire fall within our area, including Birsemore. For work in that direction, see our Aberdeen page, about 26 miles away.
If you need fire stopping in AB34, the process matches everywhere else we work: details, then a fixed price, then sealing and a 12-month guarantee. Streets here include Huntly Road, Bridge View Road and Charlestown Road, and sites on any of them can send details for a fixed quote. Sites close to Birsemore are covered too, including Aboyne (1 mile north), Dinnet (4 miles west), Kincardine O'Neil (4 miles east), Tarland (5 miles north-west) and Potarch (5 miles east). Further afield, our area takes in Banchory (11 miles east), Alford (12 miles north), Ballater (10 miles west) and Torphins (7 miles north-east).
What’s near Birsemore
Nearby you’ll also find Aboyne Hospital (0.9 miles north-east) and Aboyne Castle (1.2 miles north). The countryside around Birsemore includes Mortlich and Loch of Aboyne.