Fire-rated sealing and fire stopping in Strachur, Argyll and Bute
Fire stopping for Strachur, from a contractor working since 2005. Fully insured, with a 12-month guarantee.
- Improvised or mixed-product fire seals
- Seals disturbed by maintenance and left open
- Open linear gaps along the top of fire-resisting walls
Fire stopping near Strachur
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
From enquiry to sign-off
Occupied buildings need a little choreography. We sign and contain the area we are in, keep walkways clear and move on in phases so staff and visitors can carry on around us. Travel to smaller Scottish places like Strachur is planned so the job is finished in one visit where possible, so photographs, sizes and a full list matter. Outside work also needs a suitable weather window.
- First we go through the drawings, schedule or specification for the seals.
- On site, each opening is checked against the tested detail it is meant to follow.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- Mineral wool or other backing goes in wherever the detail asks.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
Getting the site ready
- Tell staff and tenants when we’ll be in
- Point out any areas we must not close
- Send any specification or drawings in advance
Ask for a quote
Tell us about the building, the joints and when you need the work done, and we’ll put a fixed quote together. The easiest way is to ring 01277 525 020 or email us.
Advice
About our fire stopping in Strachur
Our applicators are CSCS-carded, and we are CHAS accredited and a Constructionline member. We hold no third-party fire-stopping installer certificate, and we won’t pretend otherwise. We install the specified fire-rated sealant to its tested detail, and our workmanship carries a 12-month guarantee. If you are dealing with fire-stopping items raised at inspection or handover and unsealed openings around new pipes and cables, we can put it right, whatever the surface. For commercial sealant work in Strachur, you deal with one contact from quote to sign-off, for single jobs and planned programmes alike.
Refurbishments in small hotels, schools and care homes around places like Strachur can leave gaps around new services. A round of checks after M&E work is good practice, and any gaps found are sealed where fire-rated sealant is specified.
Our workmanship is guaranteed for 12 months, in Strachur as everywhere else we work. If a joint we sealed fails because of how it was installed, we come back and put it right.
- Where
- Strachur (PA27)
- Wider area
- Argyll and Bute
- Guarantee
- A 12-month guarantee
- Price
- A fixed quote before we start
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Service penetrations in Strachur buildings
Under the Scottish non-domestic Technical Handbook, clause 2.1.14, penetrations should be fire stopped to at least the wall or floor’s fire resistance duration, using products tested for the way they’re used. Our part is installing the specified fire-rated sealant to its tested detail.
In a building such as Kilmaglash Parish Church and Sculptured Stones, any service penetration through a fire-resisting wall should be sealed to the specified detail.
Strachur is about 17 miles north-west of Helensburgh, in Argyll and Bute. Strachur sits inside our coverage and the rest of Argyll and Bute, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. 124 places across Argyll and Bute fall within our area, including Strachur. For work in that direction, see our Glasgow page, about 37 miles away.
If you need fire stopping in PA27, the process matches everywhere else we work: send details, get a quote, we seal, guaranteed. Among the streets we cover are Montgomery Place, Manse Gardens and Forest View. If your building is just outside Strachur, we cover Inbhir Aora (4 miles north), Inveraray (4 miles north), Lochgoilhead (6 miles east), Cairndow (8 miles north-east) and Minard (8 miles south-west). Nearby towns on our patch include Rhu (15 miles south-east), Garelochhead (11 miles south-east) and Sandbank (14 miles south). Where a site is remote or on an island, travel and materials need planning ahead, so include the location in your enquiry.
Local landmarks in Strachur
A little further out are Strachur Smiddy Museum (under half a mile north-west).
Also near Strachur
Other services in Strachur
Signs you need fire stopping in Strachur
Linear gaps fail where a fire-resisting wall meets a slab, soffit or another wall. Deflection and building movement can open these gaps, and a product not tested for that movement may crack. The tested detail for a linear joint states the width and movement it covers.
These are often picked up first by site or facilities staff:
- Seals that don’t match their tested detail
- Expanding foam used as fire stopping
- Hidden openings found during inspections
- Fire sealant pulled out of the opening
Buildings near Strachur get the fire-rated product that’s specified, installed to its tested detail.
What to look for in a quote
- Will failed sealant be removed rather than covered?
- What level of public liability insurance do they hold?
- How long is the guarantee, and what does it include?
- Their approach to joint depth and backing
Different surfaces, different methods
Metal pipes
Copper and steel pipes are a common service penetration for fire-rated sealant. The tested detail sets the pipe size range, gap, depth and whether insulation can stay on and we confirm each before sealing.
Drylining partitions
Holes in board are often cut larger than needed. An oversized hole may be outside the sealant’s range and we will tell you what the detail says instead.
Looking after the joints
A few simple habits keep the new joints working:
- Get seals inspected before ceilings and boxing close
- Report damaged or disturbed seals as soon as they’re spotted
- Look above ceilings when tiles are lifted for other jobs
- Ask which product is in place before decorating
During planned inspections, look at seals in risers, cupboards and voids. Look for cracks, unsealed new cables and gaps that have been enlarged and get them dealt with.
Looking at service areas on a regular cycle pays off. Catching a damaged seal early keeps the fix small; found late, it can be one of many.
Owners, agents and contractors
Facilities managers want contractors who arrive with the paperwork sorted. Let us know the documents you need (RAMS, insurance certificate, CSCS details) and we will confirm them with the quote.
Whether you’re a managing agent, a property factor or an owner’s representative: send details, get a fixed quote, we seal, guaranteed. We can agree access arrangements and keyholder contacts beforehand.
FAQs: Strachur
Do you design the fire stopping for buildings in Strachur?
No. Fire-stopping design and sign-off belong to the designer, principal designer, fire engineer or building control. We install fire-rated and intumescent sealant around service penetrations and linear gaps where it is specified, to the manufacturer’s tested detail.
Is Strachur too small for you to travel to?
Not at all. Strachur is within our area. We cover the whole of Scotland. We plan jobs in smaller places so return trips are kept to a minimum.
How do I request a quote?
The quote form is the simplest route, though you can also phone 01277 525 020 or use the quote form. Include photographs or drawings if you have them.
Can you handle several sites?
Yes. Several buildings can share a single quote, and you deal with one contact throughout across South East England, Greater London and Scotland.
Can you send site paperwork?
Requirements differ from site to site, so list what you need, whether RAMS, insurance or CSCS details, and we’ll confirm with the quote.
When can you be on site?
Give us your site hours and any access windows in your enquiry, and we’ll schedule the work to suit. You can reach the office between 8am and 5pm, Monday to Friday.
What if there’s asbestos in the old mastic?
Asbestos is possible in some older mastics, particularly in buildings from before 2000. We check the asbestos register before cutting out old sealant in an older building, and work stops until any suspect material has been tested. Removing asbestos is a job for asbestos specialists, not us.
What sealant work can’t fix
Part of a good diagnosis is knowing where sealant stops. We will tell you if the real problem is any of the following:
- Fire doors, dampers or other fire safety equipment
- Construction that lacks the fire resistance the seal relies on
- Signing off or certifying a building’s fire stopping
Not sure which it is? You can call 01277 525 020 or send photos by email and we will tell you honestly.
Where we work in Strachur
- Linear gaps at wall heads
- Cable penetrations
- Small duct penetrations where the tested detail allows
- Service gaps in risers
- Joints between fire-resisting walls and floors
- Pipe penetrations