Shottenden fire stopping
Fire stopping in Shottenden, backed by over 20 years in commercial sealing. Fully insured, with a 12-month guarantee.
- Openings found when ceilings come down for a refit
- Damaged fire seals in risers and voids
- Seals that don’t match their tested detail
Fire stopping across Shottenden
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Fire stopping in Shottenden, done properly
A fire-rated sealant is only one part of a tested system: the evidence covers a specific product, wall or floor type, service, gap, depth and backing. Before we seal anything, we check the opening against the detail it is meant to follow, and raise it with you if it falls outside. We work on cable penetrations, joints between fire-resisting walls and floors and small duct penetrations where the tested detail allows, and what we’re called in for most is non-fire-rated filler around services and fire sealant pulled out of the opening. One point of contact handles commercial sealant work in Shottenden from the first photographs to the final walk-round, for single jobs and planned programmes alike.
Barn and farm-building conversions near places like Shottenden often combine new partitions with old walls. A penetration seal only performs as tested if product, substrate, service, gap and depth all match the detail.
Work we carry out in Kent comes with a 12-month guarantee. If an installation problem shows up, speak to us on 01277 525 020 or email the details over and we will arrange a return visit.
- Place
- Shottenden (CT4)
- Wider area
- Kent
- Cover
- 12 months on our workmanship
- Price
- Quoted before any work starts
- Phone
- 01277 525 020
- Updated
- 3 November 2026
Common problems we fix in Shottenden
Mixing products or improvising a detail breaks the link with the test evidence. An oversized gap, too shallow a bead, missing backing or two makers’ products combined are what we find most often.
Most enquiries start with one or more of the following:
- Hidden openings found during inspections
- Penetration schedules that need working through
- Fire-rated sealant that has cracked or shrunk back
- Open linear gaps along the top of fire-resisting walls
Around Shottenden, we install fire-rated and intumescent sealant to the product’s tested detail wherever it is the specified product.
Questions to ask before you book
- Health and safety accreditation such as CHAS
- What site paperwork they can supply
- Their approach to joint depth and backing
- Do they follow the manufacturer’s priming guidance?
Compartments and services around Shottenden
Shottenden is about 47 miles from central London. Tenant changes on commuter-belt business parks mean regular fit-outs, and new services through compartment walls. Fire stopping of openings and penetrations in England falls under Approved Document B. The national BS 476 classes are due to drop out of it from 2 September 2029, leaving the European BS EN 13501-2 route, subject to transitional arrangements. What we install is set by the specification, and it goes in to the tested detail.
For any site around Shottenden, we work to the specification and the manufacturer’s installation guidance, leaving design and sign-off with the designer.
Shottenden is about 5 miles south of Faversham, in Kent. Looking for fire stopping in Shottenden? We can help. Shottenden is one of 931 places in Kent on our list for service penetrations. There’s a separate page for London, about 47 miles away.
Postcode districts covered here: CT4. Buildings on Shottenden Road, Goldups Lane and Beaney's Lane are within our area for service penetrations. Just outside Shottenden, we also work in Perrywood (1 mile north), Selling (1 mile north), Hogben's Hill (2 miles north), Molash (2 miles south-west) and Mountain Street (2 miles south-east). Nearby towns on our patch include Ashford (8 miles south), Canterbury (7 miles east), Sittingbourne (10 miles north-west), Whitstable (8 miles north-east), Faversham (5 miles north) and Herne Bay (12 miles north-east).
Local landmarks in Shottenden
The closest station to Shottenden is Selling station, roughly 2 miles north. Well-known places in the area include Tower keep castle at Chilham (1.6 miles east).
Our process
We follow your site rules from the start: signing in, inductions and any permit to work. Once we are cleared to begin, we take the joints in the sequence agreed with you, and each area is checked before we leave it. Rural sites near Shottenden may need directions, gate codes or a contact on site. Add it to your enquiry and we’ll build it into the plan.
- First we confirm the product and tested details named in the specification.
- Openings are measured and grouped by detail.
- Improvised fillers and failed sealant are removed.
- Where the detail needs backing, it goes in at the stated depth.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- Completed areas are checked with you, with the records agreed when we quoted.
Getting the site ready
- Point out parking and an unloading spot
- Tell us which areas need to stay in use
- Have the specification and drawings to hand
Ask for a quote
If there’s a specification, drawings or a tender package, send it with your enquiry, and we will price the work to it. For smaller jobs, photographs and a description will do.
Advice
Towns and villages near Shottenden
What else we do in Shottenden
Questions we are asked in Shottenden
Is a smaller place like Shottenden outside your area?
Not at all. Shottenden is within our area. Our area covers London and the South East counties. Good photos up front let us bring everything on the first visit.
Can you produce the fire-stopping design for a job in Shottenden?
No. Fire-stopping design and sign-off belong to the designer, principal designer, fire engineer or building control. Our part is installing the specified product to its tested detail, and telling you if the detail calls for something other than sealant.
Can you handle several sites?
Yes. Multi-site work and planned programmes are a core part of the service, with each site phased to suit its occupants.
Can weather delay the job?
It can, for external work. Sealant won’t bond properly to a wet or frosty joint, so we watch the forecast and rearrange outside work if we have to. Internal work is far less affected.
When is resealing likely to be due?
There’s no fixed lifespan: movement, exposure, cleaning, traffic and the product all play a part. Sealant joints are maintenance items, so inspect them regularly.
Are you insured?
Yes. We’re fully insured, including public liability cover.
What site paperwork can you supply?
Requirements differ from site to site, so tell us what you need and we’ll confirm it when we quote.
Surface by surface
Cables and cable bundles
Data cabling added after handover is a regular cause of open service penetrations. Openings around new cables are resealed to the detail, and any bundle too large for sealant alone is flagged.
Linear joints
Joints at the top of partitions may need to move as the slab above deflects. The specified product and backing for that movement are what goes in, with no gaps along the run.
Work for main contractors and building owners
Whether you are a managing agent, a property factor or an owner’s representative: send details, get a fixed quote, we seal, guaranteed. Keys, access and contacts can be agreed in advance.
Housing associations and managing agents often need work done across blocks and communal areas. Work can be phased so residents and staff keep access throughout, with each stage agreed with your site contact.
What sets the cost
Quotes vary with the job. It mainly depends on:
- Any access equipment needed
- Quantities, in metres or numbers
- Whether old sealant has to be cut out first
- The product specified
No two sites price the same: the joint sizes, the specified product, access and working hours each have a bearing. A fixed quote follows once we understand the job.
Before you send an enquiry
Whether it’s one area or a whole building, these details speed things up:
- Photos of the joints, close up and from further back
- Specification clauses that apply
- Rough lengths or quantities, or drawings if you have them
- Whether the building will be occupied during the work
A handful of photographs and a postcode is the fastest way to a quote. Send them through the quote form, or call 01277 525 020 or email the details over to discuss it first.
Should maintenance staff do it?
There’s also the paperwork. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and we’ll confirm the paperwork you need with the quote.
Putting right a botched joint often costs more than sealing it well at the start, since all of it has to come out and the faces be cleaned back again. That’s why many clients bring in a specialist from the beginning.