Washroom Sealing contractors in Shottenden
Need washroom sealing in Shottenden? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.
- Failed sealant in a tea point or staff kitchen
- Black mould inside silicone joints that cleaning can’t shift
- A new bead over an old one coming away
Need washroom sealing in Shottenden?
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Our process
On arrival, we report to your site contact and complete whatever induction the building runs. Floors, finishes and fittings next to the joints are covered before any cutting starts, with the work itself usually taking a few hours for one toilet block, with bigger buildings phased across a number of visits. Jobs in and around smaller places like Shottenden are normally planned as a single visit, so we ask for photos and rough sizes first. Then the right materials arrive with us.
- We agree which washrooms close and when.
- Leaks, loose panels or damp are pointed out first.
- Failed sealant and residue are stripped out.
- We reseal with the grade suited to each area.
- We give you a reopening time for every room.
Preparing the site
- Tell staff and tenants when we will be in
- Let us know about inductions and permits
- Send any specification or drawings in advance
Getting a fixed quote
Send details, get a quote, we seal, guaranteed: that’s how every job runs. To take the first step, ring 01277 525 020 or send details through our quote form.
Related advice
About our washroom sealing in Shottenden
Closing all the facilities in a building isn’t an option. Work is phased by room or by section, so there are always facilities in use. Give us your site hours and access windows and the phasing is planned around them. We work on kitchens and tea points, accessible toilets and changing rooms and vanity units and basins, and the failures we are asked to look at most are kitchen worktop joints that can’t be kept clean and users noticing mouldy joints. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, the work in Shottenden is the same: failed joints cut out, faces prepared and the right sealant laid to the right depth.
In and around smaller places like Shottenden, washroom work is often in halls, pubs, primary schools, care homes and holiday accommodation. Mould gets into sealant in any washroom that doesn’t dry out, and once it’s in, the sealant is replaced.
We sign every job off with a 12-month guarantee. The promise is simple: if the work we did fails within twelve months, we return to fix it.
- Where
- Shottenden (CT4)
- Wider area
- Kent
- Guarantee
- 12 months on our workmanship
- Quote
- Quoted before any work starts
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
Wet areas in Shottenden’s workplaces
Shottenden lies roughly 47 miles out from central London, within the office belt around the capital. Washrooms in commuter-belt offices take constant weekday traffic, so we phase work to keep some facilities open.
Around Shottenden, washroom joints are resealed by removing the old silicone completely and laying anti-mould sanitary silicone on dry surfaces.
Shottenden is about 5 miles south of Faversham, in Kent. We cover commercial sites throughout Shottenden. We work across 931 places in Kent, large and small. Sites around London have their own page, about 47 miles away.
Business premises anywhere in CT4 are within our area. Streets here include Shottenden Road, Goldups Lane and Beaney's Lane. Nearby places we also cover include Perrywood (1 mile north), Selling (1 mile north), Hogben's Hill (2 miles north), Molash (2 miles south-west) and Mountain Street (2 miles south-east). Further afield, our area takes in Ashford (8 miles south), Canterbury (7 miles east), Sittingbourne (10 miles north-west), Whitstable (8 miles north-east), Faversham (5 miles north) and Herne Bay (12 miles north-east).
Near you in Shottenden
Shottenden’s nearest station is Selling station, roughly 2 miles north of the centre. Nearby you’ll also find Tower keep castle at Chilham (1.6 miles east).
Aftercare for building managers
Your facilities or cleaning team can help the joints last. Pass these on to them:
- Report split joints at trays and basins early
- Keep a record of which washrooms need attention
- Mention any site permits or estates rules at quote stage
- Brief cleaning staff to treat joints gently
Mild cleaning products and non-abrasive cloths look after sanitary silicone best. Aggressive descalers, solvents and scouring pads shorten its life and give mould a start.
Small numbers of failed joints are quick to phase in. Left, it tends to become a building-wide job with more phasing to plan.
Places near Shottenden
What else we do in Shottenden
What affects the price in Shottenden
The price varies from site to site. It mainly depends on:
- How accessible the joints are
- How much there is to seal
- Site requirements such as inductions and permits
- Travel to remote or island sites
There’s no price list, because the scope varies so much from one building to the next. Call for a quote.
Before you send an enquiry
A few photos plus some basic facts will normally do. It helps to include:
- Clear photographs of the problem areas
- When you need the work done
- Whether an asbestos survey exists
- Where the site is, with the postcode
Tell us about the building, the joints and when you need the work done, and we’ll put a fixed quote together. The easiest way is to speak to us on 01277 525 020 or send photos by email.
FAQs: Shottenden
What site paperwork comes with a job in Shottenden?
We’ll confirm the paperwork you need, such as RAMS, our insurance certificate and CSCS details, with the quote. We hold £5m public liability insurance, are CHAS accredited and a Constructionline member, and our applicators are CSCS-carded.
Is Shottenden too small for you to travel to?
No. Small places get the same service as large ones. We work across Greater London and the South East. Where we can, we group nearby jobs to make the most of each trip.
Do you do washroom sealing in healthcare settings?
Yes, healthcare and care settings are part of our work. Tell us what records you need and we will confirm with the quote before we start.
How long does a typical visit take?
The duration is planned around your programme and the access we’re given. You will have an expected duration with the quote.
How long before the toilets can reopen?
The silicone needs time to cure before water reaches it. We plan the phasing around that so there are always rooms open.
How do I request a quote?
You can use the quote form on this site; alternatively, ring 01277 525 020 or email drawings and photos. Include photos or drawings if you have them.
Are you CHAS accredited and on Constructionline?
Yes. We’re CHAS accredited and a Constructionline member.
What the job involves on each surface
Urinals and WC pans
The joint between a pan and the floor is easy to overlook. They are checked with everything else.
Changing rooms and gyms
We phase work so not every changing area is closed at once. Tell us your site hours and access windows and we will plan around them.
Do you need washroom sealing in Shottenden?
Sometimes the sealant fails because something behind it is moving or wet: a loose panel, a leaking waste or water coming through the wall. We check for that first and tell you if another trade is needed.
Things that typically lead to an enquiry:
- Complaints from staff, guests or users about tired washrooms
- Stained or open joints at kitchen sinks and worktops
- Failed joints along IPS and cubicle panels
- A new bead over an old one coming away
Around Shottenden, we keep some washrooms open while others are resealed.
What to look for in a quote
- Will CSCS-carded applicators be on site?
- Their pre-qualification and accreditations
- Which product they’ll use, and why it suits the joint
- How the joint faces will be prepared and primed
General trades versus a specialist
Certain joints really need a specialist: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. Getting these wrong typically costs more in the end than doing them right.
For most general trades, sealant is a sideline. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint.