Fire Stopping in Canterbury
Commercial sealant work in Canterbury for contractors, FMs and building owners: fire-rated and intumescent sealing of service penetrations and linear gaps, quoted at a fixed price.
- Fire sealant pulled out of the opening
- Fire seals cut back for extra cables and never reinstated
- Unsealed openings around new pipes and cables
Fire stopping across Canterbury
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Fire stopping for commercial buildings in Canterbury
Opened ceilings and riser doors often reveal service openings nobody sealed. If a specification already covers those walls and floors, we can reseal to it using the product and detail it sets out. Where there isn’t one, the designer or fire engineer needs to set one first. If you’re dealing with unsealed joints where partitions meet the slab and hidden openings found during inspections, we can put it right, whatever the surface. A specialist sealant contractor works differently from a general builder: in Canterbury, that means joint design, primers and backing rod as standard.
Places the size of Canterbury typically have healthcare, education and commercial buildings divided into fire compartments. Every pipe, cable or duct through those walls and floors needs a seal that matches its tested detail.
Whoever the client is, the cover is the same: twelve months on the work we carried out. It doesn’t extend to damage, faults in the building or work by others, and we’re upfront about that.
Leave it or put it right?
Open service penetrations matter on ordinary days, not just in a fire: they also carry noise, draughts and smells between rooms. The specified fire seal closes the gap for all of these. If one joint has failed on your building in Canterbury, others of the same age may be close behind. Dealing with them together saves repeat visits.
Every site prices differently: joint size, product, access and site hours all play a part. Send the details and a fixed figure follows.
Why appoint us
- 12-month guarantee on workmanship
- Old sealant cut out, never sealed over
- One phone line for London, the South East and Scotland
- Commercial sealant work since 2005
Read how commercial sealant jobs are priced and our accreditations.
Common questions from Canterbury clients
Can you take on a job at a hospital such as Kent and Canterbury Hospital?
Yes, provided the work is planned with the site’s estates team. We follow the site’s permits, sign-in and infection-control procedures in every area.
Can you work around term dates at a campus such as University of the Creative Arts?
Yes. Education sites usually want the work in vacations or in phases during term, and we plan to suit. We are CHAS accredited and a Constructionline member, and paperwork such as RAMS is confirmed with the quote.
How much does the work cost?
Every job gets its own fixed quote. To get one, call 01277 525 020 or send photos by email.
Do you approve fire stopping for building control?
No. Approval sits with the designer, principal designer or building control. We will confirm the products and details used, and you can tell us what other records you need at quote stage.
Do you take on multi-site work?
Yes. Multi-site work and planned programmes are a core part of the service, with each site phased to suit its occupants.
How do you choose the sealant?
The specification comes first, if there is one. Without one, the joint decides: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.
Can you quote from photographs?
That depends on the size and complexity of the job. Straightforward work can often be priced from photographs and measurements, and bigger or more complex jobs typically get a visit.
On site: what to expect
Our CSCS-carded applicators arrive with the sealants, primers and backing rod the job calls for. Joint faces are cleaned back to sound, dry surfaces, primer goes on where the manufacturer specifies it, and each bead is tooled to a neat concave finish. Sites in a big town such as Canterbury frequently have reception sign-in, inductions and permits to work. Send the site rules with your enquiry and we will plan to them.
- We start with your penetration schedule, drawings or specification.
- Access, permits and the order of areas are agreed with the site team.
- We compare every service penetration with its tested detail before sealing.
- Foam, ordinary sealant and debris come out.
- The specified backing and sealant go in to depth and are finished neatly.
- We tell you about openings that need a different product.
Preparing the site
- Clear stock, furniture or equipment away from the joints
- Point out parking and an unloading spot
- Tell us your opening times and when work is allowed
Quotes
A good quote starts with a clear picture: the joints involved, quantities, access and the product called for. Share whatever details you have and we will fill any gaps with a visit.
Related advice
Common problems we fix in Canterbury
Mixing products or improvising a detail breaks the link with the test evidence. An oversized gap, too shallow a bead, missing backing or two makers’ products combined are the usual culprits.
Common reasons buildings call us in:
- Seals disturbed by maintenance and left open
- Fire sealant pulled out of the opening
- Openings found when ceilings come down for a refit
- Improvised or mixed-product fire seals
For an estates team at a campus like University of the Creative Arts, under half a mile south-east of Canterbury, summer M&E works are typically followed by a round of penetration sealing.
Questions to ask before you book
- Who will actually carry out the work
- Is depth set with backing rod, or bond-breaker tape in shallow joints?
- How the existing material will be dealt with
- What site paperwork they can supply
Nearby places to Canterbury
Also in Canterbury
Keeping the joints sound
After handover, these steps help:
- Settle who seals which penetrations at the start of a project
- File the specified details where the next contractor can find them
- Leave fire sealant to cure fully before covering it
- Treat an open penetration as a priority repair
After every round of M&E works, check that the openings created have been sealed. A short check at the end of each job saves a long hunt later.
A simple record of seal locations and products helps. It tells the next contractor exactly what to reinstate.
What sealant work can’t fix
Part of a good diagnosis is knowing where sealant stops. You will hear from us if the cause turns out to be one of these:
- Walls or floors that aren’t fire-resisting to begin with
- Approving the work on behalf of building control
- Reviewing a building’s overall fire safety
If you’re not sure, just speak to us on 01277 525 020 or email us and we’ll give you a straight answer.
Surfaces we seal
- Small duct penetrations where the tested detail allows
- Pipe penetrations
- Service gaps in risers
- Cable penetrations
- Joints between fire-resisting walls and floors
- Linear gaps at wall heads
What affects the price in Canterbury
These are the things that shape the price:
- How much there is to seal
- Removal of failed or old sealant
- Which sealant the job calls for
- Backing rod, priming and other preparation
A quote for service penetrations depends on quantities, condition and access, plus any specification you’re working to. Ask us for a fixed quote.
What to include in your enquiry
There’s no need for a formal survey. A few details are enough to get going:
- The product your specification calls for
- Approximate linear metres or a joint schedule
- Photos of the joints, close up and from further back
- Where the site is, with the postcode
Let us know the site, the scope and your timescale, and we will put a fixed quote together. The easiest way is to phone 01277 525 020 or send details through our quote form.
Fire stopping around Canterbury: how the place shapes the job
Canterbury has plenty of hotels close by, all within 2 miles. Bedroom-to-corridor walls in hotels are normally fire-resisting, so new cabling or pipework through them has to be sealed to the tested detail. Approved Document B is the English guidance that covers fire stopping around openings and penetrations. The national BS 476 classes are due to drop out of it from 2 September 2029, leaving the European BS EN 13501-2 route, subject to transitional arrangements. Our part stays the same: the specified product, installed to its tested detail.
Shop fits in centres such as Whitefriars Shopping Centre, less than half a mile to the south-west of Canterbury, can bring new services through fire-resisting walls between units, which then need the specified seal. At a college such as Canterbury College, less than half a mile south-east of Canterbury, checking penetration seals after summer M&E works is good practice.
Canterbury is in Kent. Canterbury sits inside our coverage, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. Across Kent, 931 places are covered, Canterbury among them. We also cover London, around 53 miles from Canterbury.
If you need fire stopping in CT1, CT2, CT4 and CT3, the process matches everywhere else we work: send details, get a quote, we seal, guaranteed. We cover commercial and managed buildings on Long Market, High Street and High Street St Gregorys and the roads nearby. Access to Canterbury is via the A2 and A28 among other routes. Close to Canterbury, our area also takes in Wincheap (1 mile south-west), Harbledown (1 mile west), Hales Place (1 mile north), Thanington (1 mile south-west) and Stuppington (1 mile south). Bigger towns within reach include Ashford (13 miles south-west), Margate (15 miles north-east), Dover (14 miles south-east), Folkestone (14 miles south), Ramsgate (15 miles east) and Whitstable (6 miles north-west). As one of the bigger centres in Kent, Canterbury has a broad mix of commercial, public and industrial buildings, and we cover them all.
Near you in Canterbury
In Canterbury, that means premises near Canterbury School of Architecture, Bus Company Island and St Thomas of Canterbury Church, among other places. Nearby too are The Old Buttermarket pub (less than half a mile south-west) and Barton Court Grammar School (0.5 miles east). There’s a railway station in Canterbury itself: Canterbury East station. Other landmarks nearby include Whitefriars Shopping Centre (less than half a mile south-west) and Canterbury Roman Museum (less than half a mile south). For a walk, there’s Blean Woods RSPB Reserve.