Fire Stopping in Saline
Fire-rated and intumescent sealing of service penetrations and linear gaps throughout Saline and nearby, by CSCS-carded applicators. CHAS accredited and fully insured.
- Fire stopping installed outside its tested range
- Damaged fire seals in risers and voids
- Old intumescent sealant that has split away
Fire stopping for Saline sites
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Compartment walls and floors in Saline
In Scotland, clause 2.1.14 of the non-domestic Technical Handbook expects service penetrations to keep at least the fire resistance duration of the wall or floor, and products should be tested for their end use. Where fire-rated sealant is specified, that’s what we install, to the tested detail.
Where a unit on an estate such as Oakley Industrial Estate, 1.9 miles to the south of Saline, has fire-resisting walls between offices and warehouse, any new service through them should be sealed to the tested detail.
Saline is about 6 miles north-west of Dunfermline, in Fife. If you are looking for fire stopping in Saline, we can help. 132 places across Fife fall within our area, Saline among them. For work in that direction, see our Edinburgh page, about 18 miles away.
Anyone looking for fire stopping in KY12 gets the same process as the rest of our area: send details, get a quote, we seal, guaranteed. If your site is on Main Street, Bridge Street and Craighouse Place or close by, send details and we will quote for service penetrations. If your building is just outside Saline, we cover Steelend (1 mile east), Comrie (2 miles south), Blairhall (2 miles south-west), Oakley (2 miles south) and Carnock (2 miles south-east). A short drive away, we cover Dunfermline (6 miles south-east), Cowdenbeath (9 miles east), Dalgety Bay (10 miles south-east), Rosyth (8 miles south-east), Abbeyview (7 miles south-east) and Lochgelly (10 miles east).
Around Saline
Other landmarks nearby include Killernie Castle (0.6 miles east). Open spaces near Saline include Black Loch.
Fire stopping for commercial buildings in Saline
Where pipes, cables and other services cross a compartment wall or floor, the opening around them has to be closed so fire and smoke can’t move between compartments. Our job is fitting fire-rated and intumescent sealant at those service penetrations, and along linear gaps, where it is the specified product. We work to the product’s tested detail for every seal rather than guesswork. If you’re dealing with unsealed joints where partitions meet the slab and fire-stopping items raised at inspection or handover, we can put it right, on small duct penetrations where the tested detail allows, cable penetrations and joints between fire-resisting walls and floors alike. Whoever orders the work in Saline, the brief is usually the same: a clear scope, tidy work and joints that don’t fail again.
Travel to smaller places like Saline is planned so every penetration is sealed on one trip. Send the specification and photographs of the openings, with sizes if you have them.
The 12-month guarantee is for workmanship rather than wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we’re clear about what is covered before work starts.
- Where
- Saline (KY12)
- Wider area
- Fife
- Cover
- 12 months on our workmanship
- Quote
- Quoted before any work starts
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
Signs you need fire stopping in Saline
Damage plays a part too. Seals get knocked during maintenance, cut back to add a cable or pulled out when services are swapped, and the repair is often skipped.
Clients normally get in touch after noticing one or more of the following:
- Non-fire-rated filler around services
- Fire stopping installed outside its tested range
- Fire seals cut back for extra cables and never reinstated
- Head-of-wall gaps with no fire seal
Halls and meeting rooms at places like Parish Church sometimes gain new services, and any compartment wall crossed needs the specified seal.
Comparing quotes
- Whether their applicators hold CSCS cards
- How joint depth will be controlled
- Proof of insurance
- What site paperwork they can supply
What else we do in Saline
From enquiry to sign-off
A typical day starts with protection: masking tape along the joint edges and sheeting over anything nearby. The work itself usually takes anything from one day to a planned run of visits, depending on the number of seals and the access, and our waste is bagged and taken away as we go. Jobs near Saline are often grouped with others in the same area. Tell us how flexible your dates are.
- The specification and schedule come first, so we know which details apply.
- We plan the sequence of floors, risers and voids with you.
- Each opening is checked for wall or floor type, service, gap and depth.
- Unsuitable material is removed and the opening cleaned so the seal starts clean.
- The specified backing and sealant go in to depth and are finished neatly.
- Anything outside the detail is reported to you rather than sealed.
Preparing the site
- Point out any areas we must not close
- Move anything stored against the joints
- Send any specification or drawings in advance
Get a fixed quote
Every quote starts with the facts: what’s there, how much of it, how we reach it and what’s specified. Share whatever details you have and we’ll fill any gaps with a visit.
Related advice
Why it’s worth doing now in Saline
Open service penetrations matter on ordinary days, not just in a fire: they also carry noise, draughts and smells between rooms. Sealing them to the specified detail deals with the fire risk first, and the other benefits follow. Buildings that aren’t in daily use, such as halls and seasonal premises, may let water in unnoticed, so a failed joint has time to cause damage. Early resealing prevents it.
Every site prices differently: the joint sizes, the specified product, access and working hours each have a bearing. A fixed quote follows once we understand the job.
Why clients in Saline choose us
- 12-month guarantee on workmanship
- Constructionline member
- CHAS accredited
- Sealing commercial buildings since 2005
Read how commercial sealant jobs are priced and our accreditations.
After the work
Once the work is signed off, a little attention goes a long way:
- Flag new cables with no seal around them
- Ask the designer to confirm details early on refits
- Have penetrations checked while they can still be seen
- Ask which product is in place before decorating
Keep the product data and installation details with the building’s fire safety information. It makes later repairs much easier to match.
On fit-outs, get the fire-stopping specification agreed before the services go in. The designer can then choose details that suit the services planned.
Commercial clients in Saline
If you look after buildings for someone else, clear figures and clear communication matter. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative.
We work for building owners and managing agents on everything from one building to a spread of sites. Several sites can go on one quote, which keeps the paperwork simple.
Saline: questions and answers
Is Saline off your patch?
No. Places such as Saline are covered as much as the big towns. We work across every Scottish council area. Send photographs and a list of what needs doing, and we will plan the job to need as few trips as possible.
Does your area include sites such as Oakley Industrial Estate, near Saline?
Yes, sites like Oakley Industrial Estate are within our area, along with the rest of Saline. Photos and a short description are enough for a first look.
What do BS EN 1366-3 and BS EN 13501-2 mean?
The tests are BS EN 1366-3 for penetrations and BS EN 1366-4 for linear joints, and classification is to BS EN 13501-2. EI 60 means integrity and insulation for 60 minutes in the tested arrangement and the installation has to match the test.
Is your workmanship covered by a guarantee?
Yes. Workmanship is guaranteed for 12 months on every job.
Can you work to our specification?
Yes. Include it with the drawings when you ask for a quote, and the quote will be based on it, flagging anything that needs clarifying.
What about RAMS and site documents?
Tell us what site paperwork you need (RAMS, insurance certificate, CSCS details) and we will confirm with the quote.
How long does a job like this take?
It depends on the scope, though a typical visit typically takes a single visit for a short list of penetrations, or a phased programme for a whole building. For bigger or phased jobs, we’ll set out a timescale with the quote.
What sealant work can’t fix
A few problems need another trade or a different fix, and we say so rather than covering them up:
- Reviewing a building’s overall fire safety
- Construction that lacks the fire resistance the seal relies on
- Openings that need collars, wraps, batts or boards rather than sealant
Not sure which it is? You can call 01277 525 020 or use the quote form and we’ll tell you honestly before you book.
Surfaces we seal
- Linear gaps at wall heads
- Small duct penetrations where the tested detail allows
- Pipe penetrations
- Service gaps in risers
- Cable penetrations
- Joints between fire-resisting walls and floors