Fire stopping in Lochgelly
Work needed on a service penetration in Lochgelly? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Seals disturbed by maintenance and left open
- Unsealed joints where partitions meet the slab
- Expanding foam used as fire stopping
Fire stopping for businesses in Lochgelly
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Fire stopping for commercial buildings in Lochgelly
Opened ceilings and riser doors often reveal service openings nobody sealed. Where the walls and floors already have a fire-stopping specification, we can work to it using the product and detail it sets out. With no specification in place, the first step sits with your designer or fire engineer, not with us. The enquiries we see most involve openings left by services added after handover and improvised or mixed-product fire seals, on small duct penetrations where the tested detail allows, cable penetrations and service gaps in risers. A specialist sealant contractor works differently from a general builder: on jobs in Lochgelly, preparation and product choice get the time they need.
For a building near Lochgelly, we plan fire-rated sealing so it’s finished in one visit where possible. Photos of the gaps, the services and the wall or floor type help us bring the right products.
Every job is signed off with a 12-month guarantee. It’s a plain promise: if the work we did fails within twelve months, we return to fix it.
- Where
- Lochgelly (KY5, KY4)
- Wider area
- Fife
- Guarantee
- A 12-month guarantee
- Quote
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Commercial clients in Lochgelly
If you look after buildings for someone else, clear figures and clear communication matter. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative.
We take on planned maintenance as well as one-off repairs: resealing failed joints building by building, on a schedule that suits your budget. Lochgelly can form part of a wider programme across Fife.
Diagnose, treat, sign off
Tell us your site hours and access windows and we will plan around them. On the day, the work area is kept contained and tidy, and we check in with your contact before moving on to each new area. Tell us who will meet us and how to get in at your building near Lochgelly. We will confirm the plan with the fixed quote.
- The specification and schedule come first, so we know which details apply.
- We plan the sequence of floors, risers and voids with you.
- Each opening is checked for wall or floor type, service, gap and depth.
- Unsuitable material is removed and the opening cleaned so the seal starts clean.
- The specified backing and sealant go in to depth and are finished neatly.
- Anything outside the detail is reported to you rather than sealed.
What we need from you
- Share the asbestos register for older buildings
- Make sure the joints can be reached
- Share your working hours and any access restrictions
Ask for a quote
A handful of photos and a postcode is the fastest way to a quote. Upload them with the quote form, or give us a call on 01277 525 020 or email us to discuss it first.
Read more
Places near Lochgelly
What else we do in Lochgelly
Fire stopping around Lochgelly: what changes locally
The 2 miles around Lochgelly include three care or nursing homes. Care homes rely on fire-resisting walls and floors, and maintenance work that breaks through them leaves openings to seal. We install fire-rated sealant to the tested detail where it is specified. Scottish guidance (non-domestic Technical Handbook, clause 2.1.14) asks that penetrations match at least the fire resistance period of the element they pass through, with proprietary products, intumescent ones included, tested for their end use. We install fire-rated sealant to that tested detail where it is specified.
For a hospital such as Lynebank Hospital, which lies south-west of Lochgelly, penetration sealing is typically phased ward by ward, with infection-control rules agreed first. For a building at a site such as Lochgelly Business Park (0.5 miles north-east of Lochgelly), a check of penetration seals after each fit-out is good practice. In a retail centre such as Cowdenbeath Retail Park, which lies south-west of Lochgelly, any fire-resisting wall between units that is crossed by new services needs sealing to the tested detail.
Lochgelly is about 6 miles west of Kirkcaldy, in Fife. If you’re looking for fire stopping in Lochgelly, we can help, as we do across Fife. Lochgelly is one of 132 places in Fife on our list. There’s a separate page for Edinburgh, about 13 miles away.
Postcode districts covered here: KY5 and KY4. For a building on Cook Square, Main Street and High Street or nearby, send details and we’ll quote for service penetrations. You will find Lochgelly on or near the B920 and B981. If your building is just outside Lochgelly, we cover Lumphinnans (1 mile south-west), Glencraig (1 mile north), Crosshill (2 miles north), Lochore (2 miles north) and Cowdenbeath (2 miles south-west). Further afield, our area takes in Dunfermline (6 miles south-west), Kirkcaldy (6 miles east), Glenrothes (7 miles north-east), Leven (13 miles east), Dysart (7 miles east) and Dalgety Bay (7 miles south).
Landmarks near Lochgelly
For rail, the closest station is Lochgelly station, about 0.5 miles north of the centre. Well-known places in the area include Lochore Castle (1.6 miles north-west) and Lynebank Hospital (5.2 miles south-west). Green spaces nearby include Benarty Hill and Loch Gelly.
Questions we’re asked in Lochgelly
How do Scotland’s building standards affect fire-rated sealant in Lochgelly?
The non-domestic Technical Handbook, clause 2.1.14, expects a penetration to keep at least the wall or floor’s fire resistance period, with proprietary products tested for the use they’re put to. We install what has been specified, to the manufacturer’s tested detail, while design and approval sit with the designer and the verifier.
Is Lochgelly too far out for you?
Not at all. Lochgelly is within our area. We work across every Scottish council area. Good photos up front let us bring everything on the first visit.
What about RAMS and site documents?
Each site asks for different documents, so list what you need, whether RAMS, insurance or CSCS details, and we will confirm with the quote.
Who decides which product is used?
Where there’s a specification, we use the product it names. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.
Can you quote from photographs?
That depends on the size and complexity of the job. Simple work can often be priced from photographs, while larger or less clear jobs get a site visit first.
How long before the joints can be used?
We’ll confirm how long the chosen product needs to cure.
Do you have public liability insurance?
Yes. Our insurance certificate can be sent alongside the quote.
General trades versus a specialist
For most general trades, sealant is a sideline. A specialist prepares properly, controls joint depth and picks a product with the right movement class, which is what makes a joint last.
Putting right a botched joint often costs more than sealing it well at the start, since all of it has to come out and the faces be cleaned back again. That’s why many clients bring in a specialist from the beginning.
Keeping the joints sound
After handover, these steps help:
- Make fire stopping part of every scope that crosses a fire-resisting wall
- Leave fire sealant to cure fully before covering it
- Flag new cables with no seal around them
- File the specified details where the next contractor can find them
After the work, brief anyone else working in the area that the openings are now sealed. Any seal cut back for a new service needs reinstating to its tested detail.
On fit-outs, get the fire-stopping specification agreed before the services go in. The designer can then choose details that suit the services planned, and the work runs in step with the M&E.
When it isn’t the sealant
Being straight saves everyone time. Fresh joints won’t solve:
- Writing the fire-stopping specification
- Issuing fire ratings or certificates for seals
- Walls or floors that aren’t fire-resisting to begin with
Not sure which it is? You can speak to us on 01277 525 020 or send photos by email and we will tell you honestly.
Surfaces we seal
- Joints between fire-resisting walls and floors
- Pipe penetrations
- Service gaps in risers
- Cable penetrations
- Linear gaps at wall heads
- Small duct penetrations where the tested detail allows
How the job changes by surface
Cables and cable bundles
Data cabling added after handover is a regular cause of open service penetrations. Openings around new cables are resealed to the detail, and any bundle too large for sealant alone is flagged.
Plastic pipes
In a fire, plastic pipework melts away and leaves an opening. Some intumescent sealants are tested on smaller plastic pipes, though larger ones typically call for a collar or wrap. We confirm material and size first and tell you if sealant isn’t the right product.