Fire-rated sealing and fire stopping in Comrie, Fife
Our CSCS-carded applicators take on fire-rated and intumescent sealing of service penetrations and linear gaps in Comrie. Send details for a fixed quote.
- Builders’ foam or ordinary silicone in compartment walls
- Unsealed penetrations discovered above suspended ceilings
- Damaged fire seals in risers and voids
Fire stopping for businesses in Comrie
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Fire stopping in Comrie
Fire-rated sealant suits many small service penetrations: copper and steel pipes, cables and some small ducts where the tested detail allows. Larger openings and some plastic pipes call for collars, wraps, batts or boards instead. If the detail calls for something other than sealant, we say so rather than force sealant into it. We work on service gaps in risers, joints between fire-resisting walls and floors and pipe penetrations, and what we are called in for most is builders’ foam or ordinary silicone in compartment walls and old intumescent sealant that has split away. Whoever orders the work in Comrie, the brief is typically the same: a clear scope, tidy work and joints that don’t fail again.
In smaller Scottish places like Comrie, buildings with fire-resisting walls typically include schools, care homes, hotels and health centres. Those penetrations are closed with the product the specification names, built up as tested.
Every job ends the same way: guaranteed. Our workmanship is backed for 12 months, and the quote explains what it covers.
- Where
- Comrie (KY12)
- Wider area
- Fife
- Guarantee
- 12 months on every job
- Quote
- Quoted before any work starts
- Call
- 01277 525 020
- Page updated
- 3 November 2026
When it isn’t the sealant
We check first that sealant really is the fix. It won’t put right:
- Issuing fire ratings or certificates for seals
- Plastic pipes whose detail calls for a collar or wrap
- Designing or specifying fire stopping, which sits with the designer or fire engineer
If you’re not sure, just ring 01277 525 020 or send photos by email and we’ll give you a straight answer before you book.
Where we work in Comrie
- Service gaps in risers
- Small duct penetrations where the tested detail allows
- Cable penetrations
- Linear gaps at wall heads
- Pipe penetrations
- Joints between fire-resisting walls and floors
On site: what to expect
Site rules come first: sign-in, induction and whatever permit system the building uses. With the paperwork done, we take the joints in the sequence agreed with you. Tell us who will meet us and how to get in at your building near Comrie. We’ll confirm the plan with the fixed quote.
- First we go through the drawings, schedule or specification for the seals and raise any questions before we price.
- On site, each opening is checked against the tested detail it is meant to follow.
- Unsuitable fillers and loose debris are taken out of each opening.
- Mineral wool or other backing goes in wherever the detail asks.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- If an opening needs something other than sealant, we tell you instead of improvising.
Preparing the site
- Arrange parking or a loading space
- Move anything stored against the joints
- Tell us which areas need to stay in use
Quotes
Photos, drawings or a schedule of the joints and a fixed quote comes back to you. If the job needs a look first, we’ll arrange a site visit.
Advice
Penetration seals near Comrie
Under the Scottish non-domestic Technical Handbook, clause 2.1.14, penetrations should be fire stopped to at least the wall or floor’s fire resistance duration, and products should be tested for their end use. Where fire-rated sealant is specified, that’s what we install, to the tested detail.
Industrial units on estates such as Oakley Industrial Estate (0.5 miles east of Comrie) often separate offices from warehouse space with fire-resisting walls, and new services through them need the specified seal. In a building such as Church of The Most Holy Name, any service penetration through a fire-resisting wall should be sealed to the specified detail.
Comrie is about 5 miles north of Bo'ness, in Fife. We cover Comrie, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. Across Fife, 132 places are covered, including Comrie. There’s a separate page for Edinburgh, about 17 miles away.
If you need fire stopping in KY12, the process matches everywhere else we work: details, then a fixed price, then sealing and a 12-month guarantee. For a building on Main Street, Porterfield and Parkland Grove or nearby, we can quote for service penetrations. If your building is just outside Comrie, we cover Oakley (1 mile east), Carnock (1 mile east), Newmills (2 miles south), Low Torry (2 miles south) and Torryburn (2 miles south). Nearby towns on our patch include Dunfermline (6 miles east), Cowdenbeath (9 miles east), Dalgety Bay (9 miles east), Rosyth (7 miles south-east), Abbeyview (6 miles east) and Lochgelly (11 miles east).
What’s near Comrie
Well-known places in the area include Bo'ness Hospital (5.3 miles south) and Killernie Castle (2.2 miles north). Open spaces near Comrie include Black Loch.
Your questions answered
Which Scottish guidance covers penetration seals in Comrie?
The non-domestic Technical Handbook, clause 2.1.14, expects a penetration to keep at least the wall or floor’s fire resistance period, with proprietary products tested for the use they’re put to. Design sits with the designer and the verifier; installation to the tested detail is our part.
Will you take on work at estates like Oakley Industrial Estate, close to Comrie?
Yes. We cover Comrie and the area around it, including industrial estates, business parks and retail parks such as Oakley Industrial Estate. A few photos and the unit address let us price the work.
How do we ask for a quote?
You can use the quote form on this site; alternatively, call the office on 01277 525 020 or email drawings and photos. Photos, drawings or a joint schedule help us quote quickly.
Are your applicators CSCS-carded?
Yes. Our applicators hold CSCS cards, as many construction sites ask for.
What happens if old sealant might contain asbestos?
Some older mastics, especially in pre-2000 buildings, can contain asbestos. We check the asbestos register before cutting out old sealant in an older building, and if asbestos is suspected, work stops until it’s tested. We don’t remove asbestos-containing materials.
Are you CHAS accredited?
Yes. We are CHAS accredited, we are a Constructionline member and we use CSCS-carded applicators.
Who decides which product is used?
The specification comes first, if there is one. If there isn’t one, it comes down to the joint: its movement, its surfaces and what it has to cope with.
Doing it in-house
Paperwork matters too. Many sites expect CSCS cards, RAMS and proof of insurance, and our CSCS-carded applicators are used to working under those rules.
For most general trades, sealant is a sideline. A specialist prepares properly, controls joint depth and picks a product with the right movement class.
Cost factors for service penetrations
Before we quote, we look at:
- Induction, permit and paperwork requirements
- Access and working height
- Working within restricted access windows
- How much existing material needs removing
Access can matter as much as the joints themselves: joints within easy reach take less time than ones that need access equipment. Mention the access as part of your enquiry.
Details that help us quote
A few photographs plus some basic facts will normally do. It helps to include:
- How the joints are reached, and at what height
- Asbestos survey details if the building is older
- Where the site is, with the postcode
- Photos of the joints, close up and from further back
A handful of photographs and a postcode is the fastest way to a quote. Upload them with the quote form, or ring 01277 525 020 or send details through our quote form to discuss it first.
When to call us in Comrie
Most open service penetrations are left by later work. New cabling, rerouted pipework or a data route drilled through a riser leaves an opening that nobody returns to. Over a few years of fit-outs, a wall can collect a lot of these.
What tends to prompt an enquiry:
- Improvised or mixed-product fire seals
- Openings found when ceilings come down for a refit
- Old intumescent sealant that has split away
- Damaged fire seals in risers and voids
At a healthcare site like Bo'ness Hospital, 5.3 miles to the south of Comrie, new services through compartment walls are a constant, and each needs the specified seal.
What to look for in a quote
- Whether old or failed sealant will be cut out, not overlaid
- Is the sealant right for the movement and the substrate?
- How they handle RAMS and site documents
- Who will actually carry out the work
Maintenance after handover
Sealant joints are maintenance items, and how long they last depends on how they’re treated. Our advice:
- Brief every trade that openings they make must be sealed
- Look above ceilings when tiles are lifted for other jobs
- Agree the fire-stopping specification before services go in
- Foam or ordinary sealant is never a fire-seal repair
Once the seals are in, tell other trades they exist and must not be disturbed. If a seal has to be opened for a new service, it should be reinstated to the same detail.
Keep a register of where seals are and what they are made of. It tells the next contractor exactly what to reinstate, which saves guesswork.