Fire-rated sealing and fire stopping in Rooksdown, Hampshire
Our CSCS-carded applicators take on fire-rated and intumescent sealing of service penetrations and linear gaps in Rooksdown and the surrounding area. Send photographs or drawings for a fixed quote.
- Builders’ foam or ordinary silicone in compartment walls
- Unsealed penetrations discovered above suspended ceilings
- Unsealed openings around new pipes and cables
Fire stopping for Rooksdown sites
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Owners, agents and contractors
Main contractors use us as their sealant subcontractor. We work to your programme, your specification and your site rules, and our applicators hold CSCS cards.
FMs need a contractor who is easy to get on site. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we’ll confirm with the quote.
Fire stopping for commercial buildings in Rooksdown
The test standards are BS EN 1366-3 for penetration seals and BS EN 1366-4 for linear joints, with results classified under BS EN 13501-2. A rating such as EI 60 only holds when the product is installed as it was tested. Reproducing the tested arrangement on site is the part we take care of. We work on linear gaps at wall heads, service gaps in risers and pipe penetrations, and the failures we’re asked to look at most are non-fire-rated filler around services and old intumescent sealant that has split away. Whether you call it commercial sealant work, mastic application or joint sealing, the work in Rooksdown is the same: failed joints cut out, faces prepared and the right sealant laid to the right depth.
Converted and extended buildings around places like Rooksdown can mix old and new construction, so the wall or floor a service passes through isn’t always what the drawings assume. The right product depends on the wall or floor and the services passing through, and we will tell you if the detail calls for something other than sealant.
Work we carry out in Hampshire comes with a 12-month guarantee. Should something we installed fail, call the office on 01277 525 020 or send details through our quote form and we will come back to it.
- Place
- Rooksdown (RG24, RG23, RG26)
- Wider area
- Hampshire
- Cover
- A 12-month guarantee
- Quotes
- A fixed quote before we start
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Towns and villages near Rooksdown
Also in Rooksdown
Diagnose, treat, sign off
A typical day starts with protection: masking tape along the joint edges and sheeting over anything nearby. On site, the work normally takes anything from one day to a planned run of visits, depending on the number of seals and the access, and we clear our waste as we work. Work in places the size of Rooksdown is planned as a single visit where we can. Clear photos and measurements help us bring the right products.
- First we go through the drawings, schedule or specification for the seals and ask about anything unclear.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- We fit the backing the detail asks for, to the stated depth.
- We apply the specified sealant to the depth and around the services as the detail shows.
- If an opening needs something other than sealant, we tell you instead of improvising.
Before we start on site
- Point out parking and an unloading spot
- Send asbestos survey details if the building is pre-2000
- Tell staff and tenants when we’ll be in
Ask for a quote
If there’s a specification, drawings or a tender package, send it with your enquiry, and we’ll price the work to it. For smaller jobs, photographs and a description will do.
Read more
FAQs: Rooksdown
Can work at a site such as Basingstoke College of Technology fit around teaching?
Yes, holiday working periods are the norm on campus jobs. Let us know which documents your site asks for, and we’ll confirm them alongside the quote.
Is Knight Trade Park, near Rooksdown, within your area?
Yes. We cover Rooksdown and the area around it, including industrial estates, business parks and retail parks such as Knight Trade Park. Photos and a short description are enough for a first look.
How much does the work cost?
It depends on the job: quantities, access, the product and any phasing. Call for a quote.
Do you have public liability insurance?
Yes. We are fully insured, and the certificate can go with your quote.
How long will the new sealant last?
There isn’t a single answer, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular inspection is the best way to catch problems early.
Does weather matter for sealant work?
For external joints, yes. The joint has to be dry and within the product’s temperature range, so damp, frosty or very cold days can stop external work. Internal work is rarely affected.
Can you reseal penetrations after our M&E works?
Yes. Share the penetration schedule and product details for a fixed quote. Work can run area by area behind the M&E trades so areas aren’t left open.
Penetration seals near Rooksdown
At about 47 miles from central London, Rooksdown is within reach of the capital. Business park offices in the commuter belt are refitted as tenants change, and each fit-out adds services through compartment walls. The area within 2 miles of Rooksdown holds a number of hotels. Bedroom-to-corridor walls in hotels are normally fire-resisting, so new cabling or pipework through them has to be sealed to the tested detail.
Colleges such as Basingstoke College of Technology (to the south-east of Rooksdown) add IT and services as courses change, and each new penetration through a fire-resisting wall needs sealing with the specified product. For a unit at a site such as Knight Trade Park, 0.9 miles to the south-east of Rooksdown, new power or data runs between office and warehouse can breach a compartment wall. In a hotel such as Apollo Hotel (0.8 miles east of Rooksdown), new pipework or cabling through bedroom and corridor walls needs sealing with the specified product.
Rooksdown is about 1 mile north-west of Basingstoke, in Hampshire. We cover commercial sites throughout Rooksdown, whether it’s a single job or part of a planned programme. Rooksdown is one of 723 places in Hampshire on our list. There’s a separate page for Reading, roughly 13 miles from Rooksdown.
If you need fire stopping in RG24, RG23 and RG26, the process matches everywhere else we work: details, then a fixed price, then sealing and a 12-month guarantee. Among the streets we cover are Mill Road, The Square and Hasket Road. We also cover Winklebury (1 mile south), Sherborne St John (1 mile north-east), Basingstoke (1 mile south-east), Worting (2 miles south-west) and Buckskin (2 miles south). A short drive away, we cover Farnborough (15 miles east), Fleet (12 miles east), Alton (11 miles south-east), Yateley (13 miles east), Tadley (5 miles north) and Hook (7 miles east).
Around Rooksdown
Recent enquiries here include premises near Winklebury Infant School and the streets around them. The closest station to Rooksdown is Basingstoke station, about 1.7 miles south-east of the centre. Nearby you’ll also find Willis Museum (1.9 miles south-east) and Park Prewett Hospital (less than half a mile south). For a walk, there’s Farleigh Hill and Daneshill Park Woods.
What affects the price in Rooksdown
There’s no standard rate for sealant work, because every site is different. What we take into account:
- Whether the work must be split into stages
- Joint width, depth and condition
- Any access equipment needed
- How much there is to seal
What a job costs comes down to how many linear metres there are, what has to come out first and the access. Call for a quote once you have the details.
Before you send an enquiry
For an accurate fixed quote, we need to understand the site. Useful things to include:
- When you need the work done
- Approximate linear metres or a joint schedule
- Where the site is, with the postcode
- Whether an asbestos survey exists
To get a fixed quote, speak to us on 01277 525 020 or email us. You can also send details through our quote form.
What we can’t put right
Being straight saves everyone time. New sealant won’t cure:
- Large openings beyond what any sealant detail covers
- Construction that lacks the fire resistance the seal relies on
- Designing or specifying fire stopping, which sits with the designer or fire engineer
Not sure which it is? You can phone 01277 525 020 or send photos by email and we’ll tell you honestly.
Joints and surfaces we work on
- Pipe penetrations
- Joints between fire-resisting walls and floors
- Cable penetrations
- Linear gaps at wall heads
- Service gaps in risers
- Small duct penetrations where the tested detail allows
How the job changes by surface
Linear joints
Head-of-wall joints often have to absorb slab deflection. The specified product and backing for that movement are what goes in.
Risers and ceiling voids
Risers and ceiling voids hold most of a building’s service penetrations. Access to these areas is planned with you in advance along with any permits your site needs.
Why it’s worth doing now in Rooksdown
An unsealed opening affects more than fire safety: smoke, noise and draughts pass through them every day. The specified fire seal closes the gap for all of these and the building feels the difference. In a smaller place such as Rooksdown, getting a contractor back for a second visit takes time, so it’s worth dealing with every failing joint at once.
No two sites price the same: joint size, product, access and site hours all play a part. Send the details and a fixed figure follows.
Why us?
- Fully insured, including public liability cover
- Specification-led, product-correct work
- One phone line for London, the South East and Scotland
- Over 20 years of commercial sealing
See our cost guide and our accreditations.