The Mastic Doctor team standing beside their branded vans outside an office building
Hampshire · England

Fire stopping in Sherborne St John

Fire-rated and intumescent sealing of service penetrations and linear gaps across Sherborne St John, carried out by CSCS-carded applicators. Fully insured and CHAS accredited.

  • Expanding foam used as fire stopping
  • Damaged fire seals in risers and voids
  • Snag lists that include open service penetrations
1
Send details
Send the specification, photos or a marked-up plan.
2
Get a quote
A fixed price, with what’s included set out clearly.
3
We seal
Failed joints cut out, faces prepared, new sealant laid.
4
Guaranteed
12-month guarantee on our workmanship.
Covering the South East & Scotland
Constructionline member
£5m PL insurance

Fire stopping for businesses in Sherborne St John

Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.

FAQs: Sherborne St John

Can work at a site such as Basingstoke College of Technology fit around teaching?

Yes. Tell us the term dates, vacation periods and access windows, and we’ll plan the work around them. Tell us which site documents you need, such as RAMS, our insurance certificate or CSCS details, and they’re confirmed with the quote.

What does the BS 476 change mean for fire-rated sealant in Sherborne St John?

Approved Document B loses its BS 476 references from 2 September 2029, and BS EN 13501-2 becomes the route, subject to transitional arrangements. Our part doesn’t change: the specified product, to its tested detail.

Does the weather affect the work?

It can, when the joints are outside. Sealant won’t bond properly to a wet or frosty joint, so external work may be moved if conditions aren’t right. Indoors, the weather is rarely a problem.

How much does the work cost?

Each job is quoted on its own details. To get one, phone 01277 525 020 or send details through our quote form with a description of the work.

Can one quote cover more than one building?

Yes. We take on portfolio and planned maintenance work, planned site by site to suit how each building is used.

Can you work while the building is occupied?

Yes, with some planning. We agree a sequence with your contact so just one area at a time is disrupted.

Is colour matching possible?

It depends on the product. Some ranges are wide, others limited, so we’ll confirm the colours available for the specified product with the quote.

How we handle fire stopping in Sherborne St John

Penetration seals are fire tested to BS EN 1366-3 and linear joint seals to BS EN 1366-4 and the results are classified to BS EN 13501-2. A rating such as EI 60 only holds when the product is installed as it was tested. Reproducing the tested arrangement on site is the part we take care of. If you have unsealed penetrations discovered above suspended ceilings and fire-stopping items raised at inspection or handover, we can help. Searching for sealant specialists in Sherborne St John? Mastic Doctor has worked for contractors, FMs and building owners since 2005.

A job near Sherborne St John is usually planned around one visit, with the specification and photos sent in advance. We install to the specification and the manufacturer’s guidance, leaving design and sign-off with the designer and building control.

The 12-month guarantee is for workmanship rather than wear and tear. Sealant wears with time, and movement, weather, cleaning and use decide how fast, so we are clear about what is covered before work starts.

Mastic Doctor team members lined up next to their branded vans outside an office building
Location
Sherborne St John (RG24)
Wider area
Hampshire
Guarantee
A 12-month guarantee
Quote
Fixed quote, scope in writing
Call
01277 525 020
Updated
3 November 2026

On site: what to expect

Diagnose, treat, sign off: that’s the shape of every visit. First comes an inspection and agreement on scope, then the work is carried out to the specified product and detail, and the job ends with a walk round and sign-off. If others near Sherborne St John need work, visits can be combined. You’ll have a fixed quote before work starts.

  1. We start with your penetration schedule, drawings or specification.
  2. Access, permits and the order of areas are agreed with the site team.
  3. Each opening is checked for wall or floor type, service, gap and depth.
  4. Unsuitable material is removed and the opening cleaned.
  5. Backing and fire-rated sealant are installed to the detail and tooled.
  6. We tell you about openings that need a different product.

Getting the site ready

  • Warn occupants and staff about the work
  • Point out any areas we must not close
  • Tell us what induction or permit system the site runs

Quotes

Quotes are fixed against the scope you send, so the cost is agreed before work starts. To ask for one, ring 01277 525 020 or send details through our quote form.

Get a quick quote

Read more

Commercial clients in Sherborne St John

Agents, factors and owners’ representatives all follow the same route: send details, get a fixed quote, we seal, guaranteed. We can agree access arrangements and keyholder contacts beforehand.

FMs need a contractor who is easy to get on site. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we will confirm with the quote.

Honest limits

Before quoting, we check that sealant is the right answer. It won’t put right:

  • Deciding what a wall or floor needs, which belongs to the designer
  • Gaps in walls that were never built as compartment walls
  • Fire doors, dampers or other fire safety equipment

Not sure which it is? You can speak to us on 01277 525 020 or email us and we’ll tell you honestly before you book.

What we seal

  • Service gaps in risers
  • Cable penetrations
  • Linear gaps at wall heads
  • Pipe penetrations
  • Joints between fire-resisting walls and floors
  • Small duct penetrations where the tested detail allows

What happens if it’s left?

An improvised seal can look finished while offering no tested performance. Correcting it means cutting it out and starting again with the specified product, and doing it once, properly, is cheaper. Older rural buildings around Sherborne St John move with the seasons, and rigid or tired sealant can’t keep up. A sealant with the right movement capability, correctly sized, lasts far better.

Cost follows what’s involved: stripping out, preparation, sealing, access and phasing. Call for a fixed quote and we’ll explain how it’s made up.

Why choose Mastic Doctor in Sherborne St John

  • Constructionline member for supplier checks
  • Public liability insurance in place
  • 12 months’ guarantee on every job
  • CHAS accredited

Read how commercial sealant jobs are priced and our accreditations and insurance.

Common problems we fix in Sherborne St John

Plenty of openings were simply never closed. They come to light during inspections, refits or when another trade lifts a tile.

Site and facilities staff are often the first to spot these:

  • Openings found when ceilings come down for a refit
  • Snag lists that include open service penetrations
  • Fire stopping installed outside its tested range
  • Expanding foam used as fire stopping

Colleges such as Basingstoke College of Technology, 2.2 miles south of Sherborne St John, add IT and services as courses change, and each new penetration through a fire-resisting wall needs sealing with the specified product.

What your quote should include

  • How long is the guarantee, and what does it include?
  • The named product and why it was chosen
  • Are they CHAS accredited or on Constructionline?
  • How they handle RAMS and site documents

Choosing a commercial sealant contractor

Fire-rated sealing for Sherborne St John buildings

At about 46 miles from central London, Sherborne St John is within reach of the capital. Office refits around the commuter belt bring new cabling through fire-resisting walls. Fire stopping of openings and penetrations in England falls under Approved Document B. References to the older BS 476 classes are being removed from it from 2 September 2029, after which the European classification, BS EN 13501-2, is the route, subject to transitional arrangements. We install whatever has been specified, to the product’s tested detail.

For a unit at a centre such as The Malls, which lies south-east of Sherborne St John, penetration seals are worth checking after each shop fit. Theatres, wards and plant rooms at sites like Parklands Hospital, 0.9 miles south of Sherborne St John, all have compartment walls crossed by services.

Sherborne St John is about 2 miles north of Basingstoke, in Hampshire. Any commercial site in Sherborne St John is covered, for single jobs and planned programmes alike. Our Hampshire coverage takes in 723 places, large and small. We also cover Reading, around 12 miles from Sherborne St John.

If you need fire stopping in RG24, the process matches everywhere else we work: details, then a fixed price, then sealing and a 12-month guarantee. Buildings on Cranes Road, Bourne Field and Church Path are within our area. If your building is just outside Sherborne St John, we cover Rooksdown (1 mile south-west), Winklebury (2 miles south), Basingstoke (2 miles south), Worting (3 miles south-west) and South Ham (3 miles south). Bigger towns within reach include Farnborough (15 miles east), Fleet (12 miles east), Aldershot (15 miles east), Alton (12 miles south-east), Yateley (12 miles east) and Tadley (4 miles north).

Landmarks near Sherborne St John

Locally, jobs take us to sites close to Everest Community Academy. The nearest railway station is Basingstoke station, about 2.1 miles south-east. A little further out are Basing House (3.1 miles south-east) and Basingstoke and North Hampshire Hospital (1.1 miles south). The countryside around Sherborne St John includes Daneshill Park Woods.

Map of Sherborne St John © OpenStreetMap contributors

Keeping the joints sound

Problems stay small when the joints are checked regularly. Specifically:

  • Don’t let anyone top up a fire seal with the wrong product
  • Report damaged or disturbed seals as soon as they’re spotted
  • Check risers and ceiling voids after each round of works
  • Ask the designer to confirm details early on refits

Allow the manufacturer’s stated cure time before boxing in or decorating. Some fire-rated sealants accept paint and some don’t.

The simplest way to keep compartment walls intact is to plan fire stopping into every job that crosses them. Then the seal goes in while the area is open.

Accreditations

Trusted. Accredited. Insured.