Facade Sealing in Reading Street
Facade joint and window perimeter sealing on commercial buildings throughout Reading Street and nearby, by CSCS-carded applicators. Fully insured and CHAS accredited.
- Weathered facade joints that have lost their grip
- Unsightly perimeter sealant on a visible elevation
- Damp patches beside frames after rain
Need facade sealing in Reading Street?
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
How we handle facade sealing in Reading Street
External sealing depends on the weather more than most trades. The sealant needs a dry joint and temperatures inside the maker’s limits, and cold, damp starts can delay work. We plan for that and keep you updated. We work on window and door perimeters, perimeter joints where frames meet the structure and stone and brick facade joints, and the usual reasons a site gets in touch are patch repairs that keep failing and water coming in around window frames. Whether you call it commercial sealant work, mastic application or joint sealing, in Reading Street it comes down to the same thing: the right product in a properly prepared joint.
Construction in and around smaller places such as Reading Street is often barn conversions, small groups of houses or extensions to halls and schools. Perimeters, facade joints and internal sealant all need doing properly, however small the scheme.
A 12-month guarantee applies to all our work. Should something we installed fail, speak to us on 01277 525 020 or use the quote form and we’ll come back to it.
- Where
- Reading Street (TN30)
- Wider area
- Kent
- Cover
- 12 months on our workmanship
- Price
- Quoted before any work starts
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
Sites and facades in and around Reading Street
Reading Street sits in one of the drier corners of the country, the South East. Winter mornings still bring frost and condensation on frames and panels, so we time external mastic for dry faces and agree it with the site team. Reading Street is about 48 miles from central London. Construction around the commuter belt mixes station-side flats with refurbished offices and units, which keeps mastic packages in demand.
With historic properties like Smallhythe Place (1.8 miles west of Reading Street) in the area, refurbishment work often meets old masonry that needs compatible sealants. For contractors refurbishing units at places like Pickhill Business Centre, 2.2 miles west of Reading Street, the mastic covers cladding panels, roller-door and window perimeters.
Reading Street is about 9 miles south-west of Ashford, in Kent. Commercial clients in Reading Street can call on us for facade joints, as part of our coverage of Kent. Reading Street is one of 931 places we cover in Kent. There’s a separate page for Brighton, about 41 miles away.
Work on facade joints is covered throughout TN30. Just outside Reading Street, we also work in Stone Corner (1 mile south-west), Acton (2 miles south-west), Appledore Heath (2 miles east), Leigh Green (2 miles north-west) and Stone in Oxney (2 miles south-east). Bigger towns within reach include Ashford (9 miles north-east), Hythe (15 miles east), Tenterden (3 miles north-west), Kennington (11 miles north-east), New Romney (10 miles south-east) and Staplehurst (12 miles north-west).
Around Reading Street
The closest station to Reading Street is Appledore (Kent) station, about 3.3 miles east. Well-known places in the area include Smallhythe Place (1.8 miles west). For a walk, there’s Orlestone Forest.
What happens if it’s left?
Topping up a failed joint typically buys very little time. A full cut-out and reseal costs more on the day but lasts much longer, so you aren’t paying for the same joint twice. For buildings around smaller places like Reading Street, water damage can go unnoticed for longer, especially where a building isn’t used daily, so a failed joint can leak for a while before anyone sees it. Resealing early avoids that.
The specified product makes a difference, and so does the preparation. Access, phasing and site rules also count.
Why appoint us
- Constructionline member for supplier checks
- Commercial sealant work since 2005
- Colours chosen to suit frames, cladding or finishes where possible
- Products installed to the manufacturer’s instructions
Take a look at our cost guide and our accreditations.
Towns and villages near Reading Street
More services for Reading Street
Different surfaces, different methods
Perimeter joints at frames and structure
The joint around a framed system, where it meets the structure, needs sealant. Our work is that perimeter joint rather than the system it surrounds.
Brick and stone facades
Joints in natural stone need care to avoid staining. The specified stone-compatible sealant is what we use.
Common questions from Reading Street clients
Is a smaller place like Reading Street outside your area?
No. Places such as Reading Street are covered as much as the big towns. Our area covers London and the South East counties. Send photographs and a list of what needs doing, and we’ll plan the job to need as few trips as possible.
Can the mastic package for our job in Reading Street follow the site programme?
Yes. Send the programme and drawings, and we’ll plan the mastic to suit the stages. Any paperwork you need, from RAMS to our insurance certificate and CSCS details, is confirmed with the quote.
When can you be on site?
Give us your site hours and any access windows in your enquiry, and we will plan around them. Our office runs Monday to Friday, 8am until 5pm.
Is old mastic on our building likely to contain asbestos?
In older non-domestic buildings, old sealant can contain asbestos. Check the asbestos register or survey before it is disturbed; if it’s suspected, work stops until it has been tested. We don’t remove asbestos-containing materials.
How do you choose the sealant?
The specification comes first, if there is one. If there isn’t one, it comes down to the joint: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.
How many days will you need on site?
That varies with the scale of the job, but the work usually takes anything from a single day to several weeks, depending on joint lengths, access and the weather. For bigger or phased jobs, we will set out a timescale with the quote.
Will rain stop the work?
Wet joints or temperatures outside the product’s range mean waiting. The programme allows for it and we tell you if the forecast changes things as the work goes on.
For managing agents and facilities managers
If you look after buildings for someone else, you need clear quotes and clear reporting. You get a fixed quote, an agreed scope and a walk round at the end, plus a 12-month guarantee.
Facilities managers want contractors who arrive with the paperwork sorted. Let us know the documents you need (RAMS, insurance certificate, CSCS details) and we’ll confirm them with the quote.
From enquiry to sign-off
Before any cutting starts, the area is protected: tape along each joint edge and covers over finishes, stock and equipment close by. The work itself usually takes a day or two for a few elevations, and longer where access has to be moved around the building, and we clear our waste as we work. For a building around Reading Street, tell us how to find it and who will meet us. Send that with the details and we’ll confirm the plan with the quote.
- Photos, drawings or a visit tell us about the joints and the access.
- We confirm the joint type, movement and the specified product.
- The existing bead comes out in full.
- Primer is applied where the maker specifies it.
- Backing rod is fitted and the new sealant gunned in and tooled.
- The finished joints are checked with you.
What we need from you
- Send your site hours and access windows
- Arrange parking or a loading space
- Flag any permit to work we will need
Ask for a quote
Quotes are fixed against the scope you send, so you know the figure before anyone is on site. To start the process, call 01277 525 020 or email the details over.
Read more
Doing it in-house
General builders and handymen seal joints, but it isn’t their main trade. A specialist prepares properly, controls joint depth and picks a product with the right movement class, which is what makes a joint last.
Redoing a failed joint usually costs more than getting it right at the outset, because the whole bead must be removed and the faces cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
Keeping the joints sound
A few simple habits keep the new joints working:
- Insist on a full cut-out when joints are renewed
- Record the product and colour used on each elevation
- Walk the elevations once or twice a year
- Check the asbestos register before old mastic is disturbed
Keep gutters, sills and drainage paths clear. Sealant copes better when water runs off the facade as designed instead of soaking the joints.
Use each reseal to correct the joint: the right width, backing rod and a sealant with enough movement capability. A well-designed joint lasts longer than a like-for-like copy of a failed one.