Fire-rated sealing and fire stopping in Plaistow, West Sussex
Our CSCS-carded applicators take on fire-rated and intumescent sealing of service penetrations and linear gaps in Plaistow. Send details for a fixed quote.
- Openings left by services added after handover
- Expanding foam used as fire stopping
- Improvised or mixed-product fire seals
Fire stopping for businesses in Plaistow
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
What sets the cost
The price varies from site to site. It mainly depends on:
- Access and working height
- Location, for remote and island sites
- Specialist products, such as fire-rated or hygienic sealants
- Whether the work must be split into stages
There’s no price list, since every building and every scope is different. Call for a quote.
Details that help us quote
However big the job, these details speed things up:
- Drawings or a marked-up plan, if available
- The site address and postcode
- Specification clauses that apply
- When you need the work done
A good quote starts with a clear picture: what’s there, how much of it, how we reach it and what’s specified. Send what you have, and we will arrange a site visit if anything is unclear.
How we handle fire stopping in Plaistow
Sealant is the specified answer for plenty of openings, such as metal pipes, cables and some small ducts where the detail covers them. Larger openings and some plastic pipes call for collars, wraps, batts or boards instead. We use sealant where it is the specified product, and we tell you when a detail calls for something else. If you have openings found when ceilings come down for a refit and service penetrations left open after M&E works, we can put it right, on small duct penetrations where the tested detail allows, linear gaps at wall heads and pipe penetrations alike. A specialist sealant contractor works differently from a general builder: on jobs in Plaistow, preparation and product choice get the time they need.
Around smaller places like Plaistow, penetration seals come up in schools, halls, pubs with rooms, care homes and farm buildings used as offices. Any service penetration through those walls should be closed with the specified product, set out as its test evidence shows.
Every job is signed off with a 12-month guarantee. It’s a plain promise: if our work fails within that year, we put it right.
- Location
- Plaistow (RH14)
- Wider area
- West Sussex
- Guarantee
- 12 months on our workmanship
- Quote
- Quoted before any work starts
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
Fire stopping around Plaistow: points for this area
Plaistow is about 36 miles from central London. Business park offices in the commuter belt are refitted as tenants change, and each fit-out adds services through compartment walls, and the gaps need sealing with the specified product. Approved Document B is the English guidance that covers fire stopping around openings and penetrations. Its BS 476 references are being withdrawn from 2 September 2029, with BS EN 13501-2 classification taking over, subject to transitional arrangements. Our part stays the same: the specified product, installed to its tested detail.
Holiday works at schools like Plaistow and Kirdford Primary School often leave service openings to seal before pupils return.
Plaistow is about 11 miles west of Horsham, in West Sussex. We cover Plaistow and the rest of West Sussex, with the same fixed quotes and 12-month guarantee as everywhere else. Our West Sussex coverage takes in 373 places. We also cover Brighton, some 25 miles away.
If you need fire stopping in RH14, the process matches everywhere else we work: details, then a fixed price, then sealing and a 12-month guarantee. Streets here include The Street, Loxwood Road and Oakfield. Just outside Plaistow, we also work in Durfold Wood (1 mile north-west), Ifold (1 mile east), Mackerel's Common (2 miles south), Loxwood (2 miles east) and Kirdford (2 miles south). A short drive away, we cover Horsham (11 miles east), Storrington (11 miles south-east), Billingshurst (6 miles south-east), Bewbush (15 miles east), Roffey (12 miles east) and Southwater (10 miles east).
Landmarks near Plaistow
Not far away are Shillinglee Lake.
What we can’t put right
Not every problem is a sealant problem, and we’d rather tell you before you spend money. It won’t fix:
- Reviewing a building’s overall fire safety
- Gaps in walls that were never built as compartment walls
- Issuing fire ratings or certificates for seals
If in doubt, phone 01277 525 020 or email us and we’ll say what we think.
What we seal
- Pipe penetrations
- Small duct penetrations where the tested detail allows
- Service gaps in risers
- Joints between fire-resisting walls and floors
- Cable penetrations
- Linear gaps at wall heads
Signs you need fire stopping in Plaistow
Most open service penetrations are left by later work. New cabling, rerouted pipework or a data route drilled through a riser can leave the hole behind. Across several fit-outs, the openings add up.
What tends to prompt an enquiry:
- Service penetrations left open after M&E works
- Builders’ foam or ordinary silicone in compartment walls
- Fire-stopping items raised at inspection or handover
- Head-of-wall gaps with no fire seal
In a building such as Holy Trinity Church, any service penetration through a fire-resisting wall should be sealed to the specified detail.
What your quote should include
- How the joint faces will be prepared and primed
- The named product and why it was chosen
- Will CSCS-carded applicators be on site?
- The terms of the workmanship guarantee
Questions we’re asked in Plaistow
Do you design the fire stopping for buildings in Plaistow?
No. The designer or fire engineer sets the detail and building control accepts it. Our part is installing the specified product to its tested detail, and telling you if the detail calls for something other than sealant.
Is Plaistow too small for you to travel to?
No. Small places get the same service as large ones. Our area covers London and the South East counties. We plan jobs in smaller places so return trips are kept to a minimum.
Can you handle several sites?
Yes. A group of buildings can go on one quote, and you deal with one contact throughout.
Are your applicators CSCS-carded?
Yes. We use CSCS-carded applicators, as many construction sites ask for.
How much does the work cost?
Each job is quoted on its own details. For yours, call the office on 01277 525 020 or email drawings and photos.
Can the sealant be colour-matched?
In many cases, yes. Sealants are made in a wide range of standard colours, and matching to RAL references or nearby finishes is commonly requested. We’ll confirm the colours available for the specified product.
Do you seal on top of existing sealant?
No. Failed sealant is removed and the faces cleaned back to sound, dry material first, because fresh silicone will not bond with aged silicone.
Looking after the joints
Sealant joints are maintenance items, and their life depends on movement, exposure, cleaning and use. We suggest:
- Foam or ordinary sealant is never a fire-seal repair
- Check with the data sheet before painting over fire sealant
- Get seals inspected before ceilings and boxing close
- Ask the designer to confirm details early on refits
Allow the manufacturer’s stated cure time before boxing in or decorating. Not every fire-rated product can be painted.
On fit-outs, get the fire-stopping specification agreed before the services go in. Details can then be picked to suit the actual pipes, cables and ducts, and installation follows the programme.
How a job runs
We schedule the visit to fit the site hours and access windows you give us. While we are working, the area stays contained and tidy, and we check in with your contact before moving on to each new area. Jobs in and around smaller places like Plaistow are normally planned as a single visit, so we ask for photographs and rough sizes first. Then the right materials arrive with us.
- We read the specification, drawings or penetration schedule you send.
- On site, each opening is checked against the tested detail it is meant to follow.
- Unsuitable fillers and loose debris are taken out of each opening.
- Mineral wool or other backing goes in wherever the detail asks.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- If an opening needs something other than sealant, we tell you instead of improvising.
Before we start on site
- Point out parking and an unloading spot
- Make sure the joints can be reached
- For older buildings, check the asbestos register before work
Get a fixed quote
A handful of photographs and a postcode is the fastest way to a quote. Send them through the quote form, or give us a call on 01277 525 020 or send details through our quote form if you’d rather talk the job through.
Advice
Nearby places to Plaistow
Other services in Plaistow
For managing agents and facilities managers
Planned maintenance programmes are welcome: working through a building or an estate in stages that fit your budget. Sites in Plaistow can sit alongside others in a wider programme across West Sussex.
Facilities managers want contractors who arrive with the paperwork sorted. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we will confirm with the quote.