Fire stopping in Bewbush
Fire-rated and intumescent sealing of service penetrations and linear gaps across Bewbush, carried out by CSCS-carded applicators. CHAS accredited and fully insured.
- Penetration schedules that need working through
- Openings found when ceilings come down for a refit
- Service penetrations left open after M&E works
Fire stopping for businesses in Bewbush
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Fire stopping for commercial buildings in Bewbush
On a fit-out or refurbishment, we follow the services contractors floor by floor. To price a package, ring 01277 525 020 or send photos by email with the schedule or marked-up drawings alongside the manufacturer’s details. Tell us what records you need and we will confirm with the quote. If you have service penetrations left open after M&E works and open linear gaps along the top of fire-resisting walls, we can help. For commercial sealant work in Bewbush, you deal with one contact from quote to sign-off, for single jobs and planned programmes alike.
Fire-rated sealing in a place like Bewbush is typically a single building at a time. With the specification and photos of the gaps, we can give a fixed quote and bring the right products.
We stand by our work: 12 months, guaranteed. It covers how we prepared and applied the sealant, and if something we did falls short, we return to it.
- Place
- Bewbush (RH11, RH12, RH10)
- Wider area
- West Sussex
- Cover
- 12 months on our workmanship
- Price
- A fixed quote before we start
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
Maintenance after handover
Regular inspection catches problems early. In particular:
- Put resealing into every M&E and fit-out package
- Report damaged or disturbed seals as soon as they’re spotted
- Foam or ordinary sealant is never a fire-seal repair
- File the specified details where the next contractor can find them
Allow the manufacturer’s stated cure time before boxing in or decorating. Some fire-rated sealants accept paint and some don’t.
Ask every contractor who works in risers or voids to report openings they create. Small habits like this stop openings building up.
Nearby places to Bewbush
Other services in Bewbush
From enquiry to sign-off
When we get to site, we report to your site contact and complete whatever induction the building runs. Everything around the joints gets protected before any cutting starts, and the work normally takes longer where risers, ceiling voids or occupied floors have to be worked through in sequence. What matters most for a job in Bewbush is a clear list of what needs doing. A fixed quote follows.
- We start with your penetration schedule, drawings or specification.
- Access, permits and the order of areas are agreed with the site team.
- Each opening is checked for wall or floor type, service, gap and depth.
- Unsuitable material is removed and the opening cleaned first.
- Backing and fire-rated sealant are installed to the detail and tooled.
- Anything outside the detail is reported to you rather than sealed.
What we need from you
- Tell us your opening times and when work is allowed
- Make sure the joints can be reached
- Tell staff and tenants when we’ll be in
Ask for a quote
For a fixed quote, call 01277 525 020 or send details through our quote form, telling us the site location and the nature of the job. You can also send details through our quote form.
Related advice
Quoting for work in Bewbush
These are the things that shape the price:
- The product specified
- Whether old sealant has to be cut out first
- The size and state of each joint
- How accessible the joints are
No two sites price the same: joint size, product, access and site hours all play a part. Send the details and a fixed figure follows.
Before you send an enquiry
Good information means a firmer quote. Helpful details to send:
- Your programme or deadline
- Asbestos survey details if the building is older
- Any specification or named product
- The site address and postcode
The quickest route to a quote is a few photos and the site postcode. Upload them with the quote form, or give us a call on 01277 525 020 or email a schedule or drawings to discuss it first.
Compartments and services around Bewbush
Fire stopping of openings and penetrations in England falls under Approved Document B. References to the older BS 476 classes are being removed from it from 2 September 2029, after which the European classification, BS EN 13501-2, is the route, subject to transitional arrangements. What we install is set by the specification, and it goes in to the tested detail. Crawley, one of the planned towns of the twentieth century, takes in or adjoins Bewbush. Decades of new cabling and pipework in planned-town buildings can leave openings in compartment walls to seal with the specified product.
On estates like Holmbush Potteries Industrial Estate (1 mile south-west of Bewbush), the wall between office and warehouse is often fire-resisting, and cables through it need the specified seal. For a unit at a centre such as County Mall, 1.6 miles to the east of Bewbush, penetration seals are worth checking after each shop fit. Colleges such as Crawley College (1.9 miles north-east of Bewbush) add IT and services as courses change, and each new penetration through a fire-resisting wall needs sealing with the specified product.
Bewbush is about 1 mile west of Crawley, in West Sussex. We send applicators to Bewbush for service penetrations. Bewbush is one of 373 places in West Sussex on our list. For work in that direction, see our Brighton page (19 miles or so).
Commercial sites across RH11, RH12 and RH10 are covered. Among the streets we cover are Eden Road, Byrd Road and Booth Road. Nearby places we also cover include Gossops Green (1 mile north-east), Ifield (1 mile north-east), Ifieldwood (2 miles north), Lambs Green (2 miles north-west) and Rusper (3 miles north-west). A short drive away, we cover Horsham (5 miles south-west), Haywards Heath (9 miles south-east), Burgess Hill (11 miles south), East Grinstead (9 miles east), Billingshurst (12 miles south-west) and Roffey (4 miles south-west).
What’s near Bewbush
In Bewbush, that means premises near Target Hill Park, The Windmill pub and St Wilfrid's Catholic School and the streets around them. For rail, the closest station is Ifield station, roughly 0.8 miles north. Other landmarks nearby include Crawley Museum (1.6 miles north-east) and County Mall (1.6 miles east). For a walk, there’s Tilgate Lake.
FAQs: Bewbush
Will you plan work around the academic year at somewhere like Crawley College?
Yes. Education sites typically want the work in vacations or in phases during term, and we plan to suit. Let us know which documents your site asks for, and we will confirm them alongside the quote.
Is a hospital such as Crawley Hospital somewhere you can work?
Yes, provided the work is planned with the site’s estates team. The estates team’s permit system and infection-control rules come first, and the work is planned around them.
How long before the joints can be used?
Curing time varies by product, and we confirm it on the day.
Do you hold third-party fire-stopping installer certification?
No. We don’t hold a third-party fire-stopping installer certificate. We are CHAS accredited and a Constructionline member, and our applicators are CSCS-carded. If your contract requires third-party installer certification, we’re not the right fit for that package.
How do you deal with asbestos in old sealant?
Asbestos is possible in some older mastics, particularly in buildings from before 2000. We check the asbestos register before cutting out old sealant in an older building, and work stops until any suspect material has been tested. We don’t remove asbestos-containing materials.
Is sealant suitable for all service openings?
No. It depends on the tested detail for that wall or floor and service. Collars, wraps, batts and boards exist for openings sealant doesn’t cover, and we flag those rather than improvise.
Is the work guaranteed?
Yes, for 12 months. If a joint fails because of how we installed it, we come back and put it right.
What sealant work can’t fix
A proper diagnosis includes knowing what sealant can’t do. We’ll tell you if the real problem is one of these:
- Issuing fire ratings or certificates for seals
- Construction that lacks the fire resistance the seal relies on
- Deciding what a wall or floor needs, which belongs to the designer
If in doubt, give us a call on 01277 525 020 or email us and we will say what we think before you book.
Joints and surfaces we work on
- Linear gaps at wall heads
- Cable penetrations
- Service gaps in risers
- Small duct penetrations where the tested detail allows
- Pipe penetrations
- Joints between fire-resisting walls and floors
Different surfaces, different methods
Drylining partitions
Holes in board are often cut larger than needed. An oversized hole may be outside the sealant’s range and we will tell you what the detail says instead.
Cables and cable bundles
Cable penetrations are frequently sealed with fire-rated sealant where the detail allows. The detail limits bundle size and the gaps between and around cables.
General trades versus a specialist
For a quick touch-up, site staff may be fine, but anything bigger is another matter: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
What you see is the finished bead, but most of the work is hidden. Backing rod, primer where specified and a joint designed to move with the building are easy to get wrong without experience.