Fire-rated sealing and fire stopping in Kirdford, West Sussex
We carry out fire-rated and intumescent sealing of service penetrations and linear gaps in Kirdford and the surrounding area. Send details for a fixed quote.
- Penetration schedules that need working through
- Head-of-wall gaps with no fire seal
- Fire seals cut back for extra cables and never reinstated
Need fire stopping in Kirdford?
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
About our fire stopping in Kirdford
On a fit-out or refurbishment, we follow the services contractors floor by floor. To price a package, ring 01277 525 020 or email drawings and photos with the schedule or marked-up drawings alongside the manufacturer’s details. Tell us what records you need and we’ll confirm with the quote. We work on joints between fire-resisting walls and floors, small duct penetrations where the tested detail allows and pipe penetrations, and the usual reasons a site gets in touch are snag lists that include open service penetrations and fire seals cut back for extra cables and never reinstated. For commercial sealant work in Kirdford, you deal with one contact from quote to sign-off, whether it’s one building or several.
Barn and farm-building conversions near places like Kirdford often combine new partitions with old walls. A penetration seal only performs as tested if product, substrate, service, gap and depth all match the detail.
We stand by our work: 12 months, guaranteed. That covers our preparation and application, and we come back if anything isn’t right.
- Where
- Kirdford (RH14)
- Wider area
- West Sussex
- Guarantee
- 12 months on every job
- Quote
- A fixed quote before we start
- Phone
- 01277 525 020
- Updated
- 3 November 2026
How the quote is worked out
Each job is priced on its own details. The things that drive the figure:
- The site’s rules and procedures
- Distance, for remote addresses
- Removal of failed or old sealant
- Joint width, depth and condition
The product called for affects the cost, as does the preparation each joint needs, such as cutting out, priming or new backing rod. Access, phasing and site rules also count.
Sending details for a quote
The more we know, the firmer the quote. Helpful details to send:
- The type of building and who uses it
- Any dates the work must fit around
- A wide shot and a close-up of the area
- Anything awkward about access or site hours
Quotes are fixed against the scope you send, so the cost is agreed before work starts. To ask for one, phone 01277 525 020 or email the details over.
Compartment walls and floors in Kirdford
In England, Approved Document B covers fire stopping of openings and penetrations. The national BS 476 classes are due to drop out of it from 2 September 2029, leaving the European BS EN 13501-2 route, subject to transitional arrangements. What we install is set by the specification, and it goes in to the tested detail. Kirdford is about 38 miles from central London. Tenant changes on commuter-belt business parks mean regular fit-outs, and new services through compartment walls, and the gaps need sealing with the specified product.
Around Kirdford, we install fire-rated and intumescent sealant to the product’s tested detail wherever it is the specified product. Halls and meeting rooms at places like The Parish Church of St John the Baptist sometimes gain new services, and any compartment wall crossed needs the specified seal.
Kirdford is about 10 miles west of Horsham, in West Sussex. Across the RH14 postcode area, it works the same way: details in, fixed quote out, then sealing and a 12-month guarantee. Kirdford is one of 373 places in West Sussex on our list. We also cover Brighton, some 23 miles away.
If you need fire stopping in RH14, the process matches everywhere else we work: details, then a fixed price, then sealing and a 12-month guarantee. For a building on Oakside, Poplar Walk and Maple Drive or nearby, we can quote for service penetrations. If your building is just outside Kirdford, we cover Mackerel's Common (1 mile north), Balls Cross (2 miles west), Wisborough Green (2 miles east), Plaistow (2 miles north) and Ifold (2 miles north). A short drive away, we cover Horsham (10 miles east), Littlehampton (15 miles south), Storrington (9 miles south-east), Billingshurst (5 miles east), Bewbush (15 miles east) and Angmering (15 miles south).
Near you in Kirdford
For rail, the closest station is Billingshurst station, roughly 4.7 miles east. The countryside around Kirdford includes Shillinglee Lake and The Mens.
Places near Kirdford
What else we do in Kirdford
Commercial clients in Kirdford
For main contractors, we work as the sealant subcontractor, on new build and refurbishment alike. Programme, specification and site rules come first.
CHAS accredited and a Constructionline member, we make supplier vetting simple. We’re fully insured, and our insurance certificate can go with the quote.
Maintenance after handover
Every sealant joint needs some looking after, and their life depends on movement, exposure, cleaning and use. Our advice:
- Foam or ordinary sealant is never a fire-seal repair
- Brief every trade that openings they make must be sealed
- Include service cupboards in routine inspections
- Have penetrations checked while they can still be seen
Store the specified product details somewhere the next contractor can find them. Anyone resealing later needs to know which product and detail were used.
Specify fire stopping early on refits, not as an afterthought. Details can then be picked to suit the actual pipes, cables and ducts.
Our process
We bring the products specified for the job, along with primers and backing rod. Any old material is cut back to clean, sound faces, primer goes on where the manufacturer specifies it, and each bead is tooled to a neat concave finish. For work around Kirdford, we aim to finish in one visit, so we ask for photographs and rough sizes first. That way the right products come on the day.
- The specification and schedule come first, so we know which details apply.
- Access, permits and the order of areas are agreed with the site team.
- Each opening is checked for wall or floor type, service, gap and depth.
- Unsuitable material is removed and the opening cleaned first.
- Backing and fire-rated sealant are installed to the detail and tooled.
- Anything outside the detail is reported to you rather than sealed.
What we need from you
- Tell us what induction or permit system the site runs
- Tell us your opening times and when work is allowed
- Send any specification or drawings in advance
Get a fixed quote
If there’s a specification, drawings or a tender package, send it with your enquiry, and we will price the work to it. For smaller jobs, photos and a description will do.
Related advice
Leave it or put it right?
A seal that doesn’t match its tested detail gives false comfort. The fix is to remove it and reinstall to the detail, and doing it once, properly, is cheaper. For buildings around smaller places like Kirdford, water damage can go unnoticed for longer, especially where a building isn’t used daily, so a failed joint can leak for a while before anyone sees it. Resealing early avoids that.
A quote for service penetrations depends on how many there are, their condition and the access, plus any specification you’re working to. Call for a quote.
Why clients in Kirdford choose us
- Health and safety: CHAS accredited
- Over 20 years of commercial sealing
- Constructionline member for supplier checks
- One phone line for London, the South East and Scotland
See our cost guide and our accreditations.
How the job changes by surface
Small ducts
Some fire-rated sealant details cover small ducts. Bigger ducts and fire-resisting ductwork are normally handled with other products, and we’ll say if that applies.
Plastic pipes
Waste and drainage pipes through floors are a frequent case. The detail decides whether sealant alone is enough.
FAQs: Kirdford
Will you design a fire-stopping scheme for our building in Kirdford?
No, that sits with the designer, fire engineer or building control. We install fire-rated and intumescent sealant around service penetrations and linear gaps where it is specified, to the manufacturer’s tested detail.
What happens to BS 476 references for fire stopping in Kirdford?
References to BS 476 classes are being removed from Approved Document B from 2 September 2029, after which BS EN 13501-2 classification is the route, subject to transitional arrangements. Our part doesn’t change: the specified product, to its tested detail.
How soon can the area be used again?
We will confirm how long the chosen product needs to cure, and flag anything to keep off until it has cured.
How do I request a quote?
The quote form is the simplest route, though you can also give us a call on 01277 525 020 or email the details over. Include photos or drawings if you have them.
How much does the work cost?
Each job is quoted on its own details. To get one, call 01277 525 020 or send details through our quote form.
Are you fully insured?
Yes. We are fully insured, and the certificate can go with your quote.
Will you just go over the old sealant?
No, never. Overlaying old sealant is a frequent cause of early failure, so it all comes out first.