Fire stopping in Pentonville
Work needed on a service penetration in Pentonville? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Seals that don’t match their tested detail
- Open linear gaps along the top of fire-resisting walls
- Fire seals cut back for extra cables and never reinstated
Fire stopping for Pentonville sites
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Questions we are asked in Pentonville
How does the removal of BS 476 from Approved Document B affect fire-rated sealing in Pentonville?
From 2 September 2029, Approved Document B drops its BS 476 references in favour of BS EN 13501-2 classification, with transitional arrangements. The designer or fire engineer sets the specification, and we install the product to the manufacturer’s tested detail.
Will you take on work at estates like Roman Way Industrial Estate, close to Pentonville?
Yes, sites like Roman Way Industrial Estate are within our area, along with the rest of Pentonville. Send details of the unit and the work through our quote form for a quick quote.
Do you hold CHAS accreditation?
Yes. We are CHAS accredited, we’re a Constructionline member and we use CSCS-carded applicators.
How long will the new sealant last?
There’s no fixed lifespan: movement, exposure, cleaning, traffic and the product all play a part. Treat them as maintenance items and inspect them regularly.
Are you insured?
Yes. Our insurance certificate can be sent alongside the quote.
Can you work to our specification?
Yes. Send it with your enquiry, and we’ll price the work to it.
Is colour matching possible?
It depends on the product specified. Some ranges offer many colours, others very few, so we’ll confirm the colours available for the specified product with the quote.
Fire stopping for commercial buildings in Pentonville
A fire-rated sealant is only one part of a tested system: the evidence covers a specific product, wall or floor type, service, gap, depth and backing. Before we seal anything, we check the opening against the detail it is meant to follow, and we say so if it doesn’t fit. We work on joints between fire-resisting walls and floors, pipe penetrations and small duct penetrations where the tested detail allows, and the failures we are asked to look at most are seals disturbed by maintenance and left open and head-of-wall gaps with no fire seal. Facilities teams, main contractors and managing agents in Pentonville tend to want the same three things: a clear scope, tidy work and joints that don’t fail again.
Fit-outs and M&E works in London buildings often leave service penetrations open behind ceilings and in risers. If sealant is the specified product we fit it to its tested detail, and if the detail needs something else, you will hear it from us.
Our 12-month guarantee is about workmanship, not wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we are clear about what is covered before work starts.
- Place
- Pentonville (N1, N1P, EC1V)
- Region
- Greater London
- Cover
- A 12-month guarantee
- Quotes
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
Nearby places to Pentonville
More services for Pentonville
Building owners, agents and FMs in Pentonville
Whether you’re a managing agent, a property factor or an owner’s representative: send the details, accept a fixed quote, and we carry out and guarantee the work. We can agree access arrangements and keyholder contacts beforehand.
Main contractors use us as their sealant subcontractor. Programme, specification and site rules come first, and our applicators hold CSCS cards.
Fire stopping around Pentonville: how the place shapes the job
The 2 miles around Pentonville include three care or nursing homes. Where new services have gone through compartment walls in a care setting, the gaps need the specified product. Every new tenant in a London building tends to bring new cabling, and with it new holes through compartment walls. Penetrations are sealed with the specified product, to its tested detail, under the building’s own permit rules.
At a university such as Paris Dauphine University - London Campus, less than half a mile to the south-west of Pentonville, labs, lecture blocks and residences are re-serviced often, so penetration seals are best checked after M&E work. Workshops and IT rooms at colleges like City and Islington College (less than half a mile south of Pentonville) are re-serviced often, leaving penetrations to seal.
Pentonville is about 1 mile north-east of St Pancras, in Greater London. Commercial clients in Pentonville can call on us for service penetrations. Pentonville is one of 764 places in Greater London on our list.
Postcode districts covered here: N1, N1P and EC1V for service penetrations. Streets here include City Road, Noel Road and Dewey Road. Pentonville sits on or close to the A1200, which helps when planning parking and deliveries for the job. Sites close to Pentonville are covered too, including Angel (1 mile south-west), Islington (1 mile north), Clerkenwell (1 mile south), Barnsbury (1 mile north-west) and St Pancras (1 mile south-west). A short drive away, we cover City of Westminster (3 miles south-west), Kensington (5 miles south-west), Walthamstow (5 miles north-east), Hampstead (4 miles west), Ruislip (13 miles west) and Brompton (4 miles south-west).
Around Pentonville
Recent enquiries here include premises near Islington Green School, The Camden Head Public House and Pilsudski Institute of London and the streets around them. Also close by are City of London Academy Islington (under half a mile east) and Barnard Park (less than half a mile west). The nearest railway station is Essex Road station, roughly 0.5 miles north-east. Other landmarks nearby include Museum of Funeral History (0.7 miles south-west) and Brunswick Centre (1.2 miles south-west). Green spaces nearby include Ludgate Hill and St. James's Park Lake.
What we are called out for in Pentonville
Most open service penetrations are left by later work. A new cable pulled by an electrician, a pipe rerouted by a plumber or a data run drilled through a riser can leave the hole behind. Over a few years of fit-outs, a wall can collect a lot of these.
It’s worth sending us details if you spot any of the following:
- Fire stopping installed outside its tested range
- Service penetrations left open after M&E works
- Seals disturbed by maintenance and left open
- Fire sealant pulled out of the opening
Wherever services are added at a hospital such as Moorfields Eye Hospital (City Road campus), 0.8 miles south-east of Pentonville, the compartment line has to be made good with the specified product.
What your quote should include
- How the joint faces will be prepared and primed
- The named product and why it was chosen
- The terms of the workmanship guarantee
- Their public liability cover
Our process
Occupied buildings need a little choreography. The work area is signed and kept contained, with routes through the building left open and work section by section so the rest of the building stays in use. Planning a London job such as one in Pentonville starts with access. Send the building rules and access times with your enquiry.
- First we confirm the product and tested details named in the specification.
- Openings are measured and grouped by detail.
- Old or wrong materials are cut out.
- Where the detail needs backing, it goes in at the stated depth.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- We walk the completed areas with you and confirm the records agreed at quote stage.
Preparing the site
- Move anything stored against the joints
- Agree which areas must stay open
- Arrange parking or a loading space
Get a fixed quote
Send us photographs, drawings or a joint schedule are often enough for a fixed quote. Where a site visit makes more sense, we will arrange one.
Read more
How the job changes by surface
Metal pipes
Heat travels along metal pipework. If the detail needs something beyond sealant, we tell you.
Risers and ceiling voids
Risers and ceiling voids hold most of a building’s service penetrations. Access to these areas is planned with you in advance, including keys, permits and any isolations.
After the work
To get the most from the new sealant:
- Flag new cables with no seal around them
- Settle who seals which penetrations at the start of a project
- Check risers and ceiling voids after each round of works
- Ask which product is in place before decorating
Store the specified product details somewhere the next contractor can find them. It makes later repairs much easier to match.
Ask every contractor who works in risers or voids to report openings they create. Small habits like this stop openings building up.
Site staff or a sealant specialist?
General builders and handymen seal joints, but it isn’t their main trade. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint, which is what makes a joint last.
A short, simple internal joint is often within reach of a maintenance team. Where it goes wrong is preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.