Newtonhill fire stopping
Work needed on a service penetration in Newtonhill? We assess it, carry out the work and guarantee our workmanship for 12 months.
- Openings found when ceilings come down for a refit
- Builders’ foam or ordinary silicone in compartment walls
- Fire-stopping items raised at inspection or handover
Fire stopping in Newtonhill
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
About our fire stopping in Newtonhill
No fire sealant works on its own: the evidence covers a specific product, wall or floor type, service, gap, depth and backing. We match each opening to that detail before any sealant goes in, and raise it with you if it falls outside. Site teams most often ask us about open linear gaps along the top of fire-resisting walls and builders’ foam or ordinary silicone in compartment walls, across service gaps in risers, small duct penetrations where the tested detail allows and joints between fire-resisting walls and floors. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, the work in Newtonhill is the same: failed joints cut out, faces prepared and the right sealant laid to the right depth.
In smaller Scottish places like Newtonhill, buildings with fire-resisting walls typically include schools, care homes, hotels and health centres. Those penetrations are closed with the product the specification names, built up as tested.
Every job ends the same way: guaranteed. You get a 12-month guarantee on our workmanship, and the quote explains what it covers.
- Where
- Newtonhill (AB39)
- Wider area
- Aberdeenshire
- Cover
- 12 months on every job
- Price
- Quoted before any work starts
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
Commercial clients in Newtonhill
Hotels, schools, healthcare sites, offices and retail units book us directly too. We plan around the way the building is used, so the building keeps working while we do.
As a CHAS accredited contractor and Constructionline member, we’re straightforward to vet for your supplier list. We’re fully insured, and our insurance certificate can go with the quote.
From enquiry to sign-off
Occupied buildings need a little choreography. The work area is signed and kept contained, with routes through the building left open and move on in phases so staff and visitors can carry on around us. For work around Newtonhill, we aim for one trip, which is why we ask for photographs and a full list first. External joints need a dry spell as well.
- We read the specification, drawings or penetration schedule you send.
- On site, each opening is checked against the tested detail it is meant to follow.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- Mineral wool or other backing goes in wherever the detail asks.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- If an opening needs something other than sealant, we tell you instead of improvising.
Getting the site ready
- Explain the parking and delivery arrangements
- Make sure the joints can be reached
- Flag any permit to work we will need
Quotes
For a fixed quote, speak to us on 01277 525 020 or use the quote form. You can also send details through our quote form.
Read more
Newtonhill: questions and answers
Is Newtonhill off your patch?
No. Places such as Newtonhill are covered as much as the big towns. Every Scottish council area is within our area. Where we can, we group nearby jobs to make the most of each trip.
Which Scottish guidance covers penetration seals in Newtonhill?
Scotland’s non-domestic Technical Handbook covers it in clause 2.1.14: penetrations keep at least the element’s fire resistance duration, with products tested for their end use. We install what has been specified, to the manufacturer’s tested detail, while design and approval sit with the designer and the verifier.
Which sealant will you use?
The specification comes first, if there is one. If there isn’t one, it comes down to the joint: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.
Do you need to see the site first?
That depends on the size and complexity of the job. Simple work can often be priced from photos, and bigger or more complex jobs normally get a visit.
Will your applicators have CSCS cards?
Yes. Our applicators hold CSCS cards, as many construction sites ask for.
Do you work to architects’ specifications?
Yes. The specification and the manufacturer’s installation guidance are what we work to.
Is the work guaranteed?
Yes, for 12 months. If our installation fails in that time, we return and fix it.
Looking after the joints
Keep the joints in good shape with a few simple steps:
- Check risers and ceiling voids after each round of works
- Don’t let anyone top up a fire seal with the wrong product
- Brief every trade that openings they make must be sealed
- Settle who seals which penetrations at the start of a project
Give the sealant its full cure time before ceilings, boxing or decoration go over it. Some fire-rated sealants accept paint and some don’t, so check the product data first.
A simple record of seal locations and products helps. When a new service goes through, everyone knows which product and detail to match, which saves guesswork.
Why act early in Newtonhill
Open penetrations multiply: each new service adds to the list. A schedule that is dealt with regularly stays manageable, rather than turning into a full building survey and reseal. Around smaller places like Newtonhill, halls, stores and seasonal buildings may not be checked often, so a failed joint has time to cause damage. Resealing early avoids that.
The work involved drives the cost: stripping out, preparation, sealing, access and phasing. Call for a quote.
What you get with us
- Old sealant cut out, never sealed over
- Constructionline member for supplier checks
- Work to your specification and the manufacturer’s guidance
- CHAS accredited
See our cost guide and how we’re accredited.
Cost factors for service penetrations
What shapes the price:
- Whether old sealant has to be cut out first
- The site’s rules and procedures
- The size and state of each joint
- The product specified
Quantities, awkward access and phased working all shape the price. So do site requirements such as inductions and permits.
Before you send an enquiry
Diagnosis starts before we arrive. Let us know:
- Approximate linear metres or a joint schedule
- Photos of the joints, close up and from further back
- What the building is and how it’s used
- Anything awkward about access or site hours
Every quote starts with the facts: the joints involved, quantities, access and the product called for. Share whatever details you have and we will fill any gaps with a visit.
What we’re called out for in Newtonhill
Mixing products or improvising a detail breaks the link with the test evidence. Gaps beyond the tested size, shallow sealant, no backing where it was needed, or products from different systems mixed together are what we find most often.
Look out for the following:
- Unsealed penetrations discovered above suspended ceilings
- Fire stopping installed outside its tested range
- Old intumescent sealant that has split away
- Damaged fire seals in risers and voids
In a building such as Saint Ternan's Church, any service penetration through a fire-resisting wall should be sealed to the specified detail.
What your quote should include
- How long is the guarantee, and what does it include?
- How they handle RAMS and site documents
- Is the sealant right for the movement and the substrate?
- Their approach to joint depth and backing
Places near Newtonhill
More services for Newtonhill
Fire stopping in Newtonhill: the local picture
Scottish guidance (non-domestic Technical Handbook, clause 2.1.14) asks that penetrations match at least the fire resistance period of the element they pass through, with products tested for that end use. We install what’s specified, to the product’s tested detail.
Schools such as Portlethen Academy often have new data and services installed during holidays, and penetrations through fire-resisting walls should be checked afterwards. At a retail site such as Portlethen Retail Park (2.3 miles north of Newtonhill), walls between units may be fire-resisting, so services added in a refit need the specified seal.
Newtonhill is about 9 miles south of Aberdeen, in Aberdeenshire. Commercial clients in Newtonhill use us for work on service penetrations, as part of our coverage of Aberdeenshire. Our Aberdeenshire coverage takes in 179 places, from busy centres to rural villages. Sites around Aberdeen have their own page, roughly 9 miles from Newtonhill.
Anyone looking for fire stopping in AB39 gets the same process as the rest of our area: send details, get a quote, we seal, guaranteed. Among the streets we cover are St Crispin's Road, Elsick Place and Newtonhill Road. Close to Newtonhill, our area also takes in Muchalls (1 mile south-west), Cammachmore (1 mile north), Chapelton (1 mile west), Portlethen (2 miles north) and Portlethen Village (2 miles north-east). Nearby towns on our patch include Westhill (10 miles north-west), Stonehaven (5 miles south-west), Banchory (13 miles west), Balmedie (15 miles north), Blackburn (13 miles north-west) and Inverbervie (14 miles south).
Around Newtonhill
Newtonhill’s nearest station is Portlethen station, roughly 2.2 miles north-east of the centre. Nearby you’ll also find Kincardine Community Hospital (5.2 miles south-west) and Cowie Castle (4.2 miles south). Green spaces nearby include Portlethen Moss and Hill of Muchalls.