Fire stopping in Cammachmore
Sealant work in Cammachmore for main contractors, managing agents and facilities managers: fire-rated and intumescent sealing of service penetrations and linear gaps, with a fixed quote first.
- Fire seals cut back for extra cables and never reinstated
- Unsealed openings around new pipes and cables
- Fire sealant pulled out of the opening
Fire stopping in Cammachmore
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
What the job involves on each surface
Masonry and concrete
Block walls and concrete floors are common substrates for penetration seals. Dust and debris are cleared from the opening.
Cables and cable bundles
New data and power cables are the most common breach we see. Openings around new cables are resealed to the detail.
Fire stopping for commercial buildings in Cammachmore
The test standards are BS EN 1366-3 for penetration seals and BS EN 1366-4 for linear joints and the results are classified to BS EN 13501-2. That classification, such as EI 60 or EI 120, belongs to the product in its tested arrangement. Reproducing the tested arrangement on site is the part we take care of. If you are dealing with fire-rated sealant that has cracked or shrunk back and fire-stopping items raised at inspection or handover, we can help, on service gaps in risers, linear gaps at wall heads and small duct penetrations where the tested detail allows alike. A single leaking joint is often how a building in Cammachmore first comes to us: we look at the rest while we are there and tell you what we find.
For a building near Cammachmore, we plan fire-rated sealing so it’s finished in one visit where possible. Send the specification and photographs of the openings, with sizes if you have them.
We stand by our work with a 12-month guarantee. That covers our preparation and application, and if something we did falls short, we return to it.
- Where
- Cammachmore (AB39)
- Region
- Aberdeenshire
- Guarantee
- 12 months on every job
- Quote
- Quoted before any work starts
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Looking after the joints
Cleaning and maintenance staff play a part too. Share these points with them:
- Check risers and ceiling voids after each round of works
- Agree the fire-stopping specification before services go in
- Check with the data sheet before painting over fire sealant
- Make fire stopping part of every scope that crosses a fire-resisting wall
Keep the product data and installation details with the building’s fire safety information. It makes later repairs much easier to match.
Looking at service areas on a regular cycle pays off. Catching a damaged seal early keeps the fix small; found late, it can be one of many.
Questions we’re asked in Cammachmore
Is Cammachmore too small for you to travel to?
Not at all: smaller places are covered as well as towns. We work across every Scottish council area. Send photographs and a list of what needs doing, and we will plan the job to need as few trips as possible.
Can you take on a job at a hospital such as Kincardine Community Hospital?
Yes. Healthcare sites are among the places we work. We follow the site’s permits, sign-in and infection-control procedures in every area.
Can you fire stop behind the services contractors?
Yes, provided a specification covers them. Openings left by new services are among the most common jobs we see.
Will you sign off the seals for us?
No. Sign-off belongs to the designer or building control, not the installer. We will confirm the products and details used, and you can tell us what other records you need at quote stage.
Will you quote for a small job?
Single areas, one-off repairs and whole buildings are all quoted the same way: details, then a fixed price, then sealing, then a 12-month guarantee.
Do you take on multi-site work?
Yes. Several buildings can share a single quote, with one point of contact across South East England, Greater London and Scotland.
Will you just go over the old sealant?
No, never. Overlaying old sealant is a frequent cause of early failure, so it all comes out first.
What sets the cost
What shapes the price:
- Any access equipment needed
- How much existing material needs removing
- Distance, for remote addresses
- Whether the work must be split into stages
Pricing service penetrations depends on how many there are, their condition and the access. Ask us for a fixed quote.
Details that help us quote
To price the job accurately, we need to understand the site. Useful things to include:
- Any specification or named product
- Asbestos survey details if the building is older
- The postcode of the building
- Whether the building will be occupied during the work
We quote a fixed sum against the scope you give us, so you know the figure before anyone is on site. To start the process, phone 01277 525 020 or email the details over.
On site: what to expect
On arrival, we report to your site contact and complete whatever induction the building runs. Floors, finishes and fittings next to the joints are covered before anything is cut or cleaned, with the work itself typically taking a single visit for a short list of penetrations, or a phased programme for a whole building. For work around Cammachmore, we aim for one trip, which is why we ask for photographs and a full list first. Outside work also needs a suitable weather window.
- First we go through the drawings, schedule or specification for the seals.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- We fit the backing the detail asks for, to the stated depth.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- If an opening needs something other than sealant, we tell you instead of improvising.
Getting the site ready
- Point out any areas we must not close
- Send your site hours and access windows
- Let building users know which areas are affected
Quotes
Specifications, drawings and tender packages are welcome with any enquiry, and we will price against exactly what is specified. Smaller jobs need nothing more than photos and a few notes.
Related advice
When to bring in a specialist
Certain joints really need a specialist: for example fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. A poor seal in places like these tends to cost more to put right later.
Redoing a failed joint typically costs more than getting it right at the outset, since all of it has to come out and the faces be cleaned back again. That’s why many clients bring in a specialist from the beginning.
Work for main contractors and building owners
Agents, factors and owners’ representatives all follow the same route: send the details, accept a fixed quote, and we carry out and guarantee the work. Keys, access and contacts can be agreed in advance.
CHAS accredited and a Constructionline member, we are straightforward to vet for your supplier list. Our insurance certificate can be sent along with the quote.
Towns and villages near Cammachmore
More services for Cammachmore
Where services cross fire walls in Cammachmore
Scotland has its own building standards: the non-domestic Technical Handbook (clause 2.1.14) says service penetrations should be fire stopped to at least the fire resistance duration of the wall or floor, using products tested for the way they’re used. Where fire-rated sealant is specified, that’s what we install, to the tested detail.
At a retail site such as Portlethen Retail Park, 1.6 miles to the north-east of Cammachmore, walls between units may be fire-resisting, so services added in a refit need the specified seal. In a school such as Portlethen Academy, fire-rated sealant goes in around service penetrations where it is specified. Theatres, wards and plant rooms at sites like Kincardine Community Hospital (5.8 miles south-west of Cammachmore) all have compartment walls crossed by services.
Cammachmore is about 6 miles north-east of Stonehaven, in Aberdeenshire. We cover commercial sites throughout Cammachmore. Across Aberdeenshire, 179 places are covered, Cammachmore among them. Our Aberdeen page has more on work in that area (8 miles or so).
Postcode districts covered here: AB39. We also cover Newtonhill (1 mile south), Chapelton (1 mile south-west), Portlethen (2 miles north-east), Muchalls (2 miles south) and Badentoy Park (2 miles north). A short drive away, we cover Westhill (9 miles north-west), Stonehaven (6 miles south-west), Banchory (12 miles west), Kintore (15 miles north-west), Newmachar (15 miles north) and Balmedie (15 miles north).
Near you in Cammachmore
Cammachmore’s nearest station is Portlethen station, about 1.7 miles north-east of the centre. A little further out are Cowie Castle (4.9 miles south) and Kincardine Community Hospital (5.8 miles south-west). The countryside around Cammachmore includes Berry Top and Portlethen Moss.