Fire-rated sealing and fire stopping in Newbigging, Angus
Looking for fire stopping in Newbigging? It’s simple: send details, get a quote, we seal, guaranteed.
- Head-of-wall gaps with no fire seal
- Fire stopping installed outside its tested range
- Seals disturbed by maintenance and left open
Need fire stopping in Newbigging?
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Fire stopping for commercial buildings in Newbigging
On a fit-out or refurbishment, we follow the services contractors floor by floor. To price a package, give us a call on 01277 525 020 or email a schedule or drawings with the schedule or marked-up drawings alongside the manufacturer’s details. Tell us what records you need and we’ll confirm with the quote. Site teams most often ask us about improvised or mixed-product fire seals and non-fire-rated filler around services, across linear gaps at wall heads, service gaps in risers and cable penetrations. Searching for sealant specialists in Newbigging? We have been sealing commercial buildings since 2005.
For a building near Newbigging, we plan fire-rated sealing so it’s finished in one visit where possible. Photos of the gaps, the services and the wall or floor type help us bring the right products.
We stand by our work: 12 months, guaranteed. It covers how we prepared and applied the sealant.
- Location
- Newbigging (DD5)
- Wider area
- Angus
- Cover
- 12 months on our workmanship
- Quotes
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Common problems we fix in Newbigging
Mixing products or improvising a detail breaks the link with the test evidence. An oversized gap, too shallow a bead, missing backing or two makers’ products combined are the usual culprits.
These are often picked up first by site or facilities staff:
- Service penetrations left open after M&E works
- Unsealed penetrations discovered above suspended ceilings
- Penetration schedules that need working through
- Damaged fire seals in risers and voids
Large healthcare estates like Ashludie Hospital, 1.9 miles to the south of Newbigging, change their services often, so penetration seals are worth checking after M&E work.
Comparing quotes
- How the joint faces will be prepared and primed
- Will failed sealant be removed rather than covered?
- Is depth set with backing rod, or bond-breaker tape in shallow joints?
- Their pre-qualification and accreditations
Questions we are asked in Newbigging
Which Scottish guidance covers penetration seals in Newbigging?
The non-domestic Technical Handbook, clause 2.1.14, expects a penetration to keep at least the wall or floor’s fire resistance period, with proprietary products tested for the use they’re put to. We install what has been specified, to the manufacturer’s tested detail, while design and approval sit with the designer and the verifier.
Can you seal around new services in a hotel near Newbigging?
Yes, where fire-rated sealant is the specified product. Each seal follows the tested detail, and rooms are done in turn.
How long do sealant joints last?
There isn’t a single answer, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular checks let you plan resealing before leaks or damage.
Are you insured?
Yes. We are fully insured, including public liability cover.
Do you work in Newbigging?
Yes. We take on work across Newbigging, with one number for every area we cover.
What will the job cost?
There isn’t a price list, as every site differs. Send photos or drawings and we will price it at a fixed figure.
Can the sealant be colour-matched?
In many cases, yes. Many products come in a range of standard colours, and matching to RAL references or surrounding finishes is often possible. We confirm what’s available for the specified product when we quote.
For managing agents and facilities managers
When you manage a building on behalf of an owner, you need clear quotes and clear reporting. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative.
As a CHAS accredited contractor and Constructionline member, we’re straightforward to vet for your supplier list. We are fully insured, and our insurance certificate can go with the quote.
Doing it in-house
For most general trades, sealant is a sideline. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint.
There’s also the paperwork. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and our CSCS-carded applicators are used to working under those rules.
Towns and villages near Newbigging
What else we do in Newbigging
Fire-rated sealing for Newbigging buildings
There are several hotels within about 2 miles of Newbigging. Hotels are divided into compartments, and refurbishments that add pipes and cables through bedroom and corridor walls leave gaps to close. Under the Scottish non-domestic Technical Handbook, clause 2.1.14, penetrations should be fire stopped to at least the wall or floor’s fire resistance duration, with proprietary products, intumescent ones included, tested for their end use. Our part is installing the specified fire-rated sealant to its tested detail.
In a building such as Newbigging Parish Church And War Memorial, any service penetration through a fire-resisting wall should be sealed to the specified detail.
Newbigging is about 3 miles north-east of Broughty Ferry, in Angus. We cover Newbigging, with the same fixed quotes and 12-month guarantee as everywhere else. 65 places across Angus fall within our area, including Newbigging. Our Dundee page has more on work in that area (7 miles or so).
Anyone looking for fire stopping in DD5 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. We cover commercial and managed buildings on Templehall Place, Sanderson Place and Pitairlie Road and the roads nearby. Nearby places we also cover include Drumsturdy (1 mile south-west), Kingennie (1 mile west), Monikie (2 miles north), Wellbank (2 miles west) and Bucklerheads (2 miles west) for service penetrations. Further afield, our area takes in Arbroath (9 miles east), Forfar (9 miles north), Carnoustie (4 miles east), Kirriemuir (13 miles north-west), Hunter's Town (4 miles east) and Gardynebourg (3 miles east).
Landmarks near Newbigging
Newbigging’s nearest station is Monifieth station, roughly 2.5 miles south. Well-known places in the area include Ashludie Hospital (1.9 miles south) and Ardestie Castle (1.7 miles south).
Leave it or put it right?
An open or wrongly sealed service penetration lets fire and smoke reach the next compartment much sooner than the building was designed for. Putting it right is normally a modest job when the openings are accessible. Wait until ceilings close or areas are occupied and the same work becomes harder to reach. Around smaller places like Newbigging, halls, stores and seasonal buildings may not be checked often, so a failed joint has time to cause damage. Early resealing prevents it.
Whether it’s a single area or a whole estate, the same things set the price: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote, and you will have a fixed figure to work with.
Why appoint us
- CSCS-carded applicators
- Fully insured
- Over 20 years of commercial sealing
- Specification-led, product-correct work
Take a look at how commercial sealant jobs are priced and our accreditations and insurance.
Our process
Inspect, seal, sign off: every visit follows that pattern. First comes an inspection and agreement on scope, then the work is carried out to the specified product and detail, and we finish with a walk round so the work can be signed off. For a building near Newbigging, directions, keys and a contact on the day are worth sorting early. We will confirm the plan with the fixed quote.
- We read the specification, drawings or penetration schedule you send.
- On site, each opening is checked against the tested detail it is meant to follow.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- Mineral wool or other backing goes in wherever the detail asks.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
Getting the site ready
- Explain the parking and delivery arrangements
- Share your working hours and any access restrictions
- Share the asbestos register for older buildings
Getting a fixed quote
Quotes are fixed against the scope you send, so the cost is agreed before work starts. To start the process, speak to us on 01277 525 020 or email the details over.
Read more
Looking after the joints
Your facilities or cleaning team can help the joints last. Share these points with them:
- Keep general-purpose fillers away from compartment walls
- Treat an open penetration as a priority repair
- Ask the designer to confirm details early on refits
- Keep product data and details in the fire safety file
After the work, brief anyone else working in the area that the openings are now sealed. Any seal cut back for a new service needs reinstating to its tested detail.
A simple record of seal locations and products helps. It tells the next contractor exactly what to reinstate, which saves guesswork.