Fire-rated sealing and fire stopping in Bucklerheads, Angus
Our CSCS-carded applicators take on fire-rated and intumescent sealing of service penetrations and linear gaps in Bucklerheads and the surrounding area. Send photographs or drawings for a fixed quote.
- Snag lists that include open service penetrations
- Damaged fire seals in risers and voids
- Unsealed joints where partitions meet the slab
Fire stopping in Bucklerheads
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
About our fire stopping in Bucklerheads
It helps to set out our role at the start. The designer, fire engineer or building control decides which fire stopping is required. We fit the specified fire-rated sealant following that specification and the maker’s installation guidance on sites in Bucklerheads. The enquiries we see most involve builders’ foam or ordinary silicone in compartment walls and unsealed joints where partitions meet the slab, on cable penetrations, linear gaps at wall heads and joints between fire-resisting walls and floors. Most enquiries from Bucklerheads start with one failed joint and grow into a wider look at the building: we look at the rest while we’re there and tell you what we find.
Around smaller places such as Bucklerheads, compartment walls and floors tend to be in schools, hotels, care homes and community buildings. Those penetrations are closed with the product the specification names, built up as tested.
Our workmanship is guaranteed for 12 months, wherever the site is. If a joint we sealed fails because of how it was installed, we come back and put it right.
- Location
- Bucklerheads (DD5)
- Wider area
- Angus
- Guarantee
- 12 months on every job
- Quote
- Quoted before any work starts
- Phone
- 01277 525 020
- Updated
- 3 November 2026
For managing agents and facilities managers
CHAS accredited and a Constructionline member, we make supplier vetting simple. Our insurance certificate can be sent along with the quote.
Planned maintenance programmes are welcome: resealing failed joints building by building, on a schedule that suits your budget. Sites in Bucklerheads can sit alongside others in a wider programme.
Places near Bucklerheads
Also in Bucklerheads
What happens if it’s left?
Open penetrations multiply: every new cable or pipe adds another. Keeping on top of it after each round of works keeps the job small, rather than turning into a full building survey and reseal. Renewing every failing joint on one visit is the sensible approach for a place like Bucklerheads. Send photographs and we’ll quote for everything together.
Whether it’s a single area or a whole estate, the same things set the price: scope, access, product and programme. Call for a quote and we’ll put a fixed figure on it.
What you get with us
- Clear, fixed quotes
- Public liability insurance in place
- A Constructionline member, so easy to vet
- Commercial sealant work since 2005
See how commercial sealant jobs are priced or how we’re accredited.
Surface by surface
Plastic pipes
Waste and drainage pipes through floors are a frequent case. The detail decides whether sealant alone is enough, and we will never swap a specified collar for sealant.
Risers and ceiling voids
Openings above suspended ceilings are easy to miss. We follow your schedule area by area and tell you about openings outside the list.
Fire-rated sealing for Bucklerheads buildings
Under the Scottish non-domestic Technical Handbook, clause 2.1.14, penetrations should be fire stopped to at least the wall or floor’s fire resistance duration, with products tested for that end use. Where fire-rated sealant is specified, that’s what we install, to the tested detail.
In a school such as Braeview Academy, fire-rated sealant goes in around service penetrations where it is specified. Where a unit on an estate such as West Pitkerro Industrial Estate, 2.1 miles south of Bucklerheads, has fire-resisting walls between offices and warehouse, any new service through them should be sealed to the tested detail. Theatres, wards and plant rooms at sites like Ashludie Hospital (to the south-east of Bucklerheads) all have compartment walls crossed by services.
Bucklerheads is about 3 miles north of Broughty Ferry, in Angus. We cover Bucklerheads and the rest of Angus, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. We work across 65 places in Angus, large and small.
Postcode districts covered here: DD5 for service penetrations. If your building is just outside Bucklerheads, we cover Wellbank (1 mile north-east), Kingennie (1 mile east), Drumsturdy (2 miles east), Newbigging (2 miles east) and Monikie (3 miles north-east). Nearby towns on our patch include Arbroath (11 miles east), Forfar (9 miles north), Monifieth (3 miles south-east), Carnoustie (6 miles east), Kirriemuir (12 miles north-west) and Hunter's Town (6 miles east).
What’s near Bucklerheads
For rail, the closest station is Balmossie station, about 3.1 miles south-east. Other landmarks nearby include James Guthrie Orchar Art Gallery (3.5 miles south) and Ballumbie Castle (1.4 miles south-west). Not far away are Trottick Mill Ponds.
From enquiry to sign-off
On arrival, we report to your site contact and complete whatever induction the building runs. Floors, finishes and fittings next to the joints are covered before anything is cut or cleaned, and the work typically takes anything from one day to a planned run of visits, depending on the number of seals and the access. Jobs near Bucklerheads are often grouped with others in the same area, to make the most of each trip. Tell us how flexible your dates are.
- First we go through the drawings, schedule or specification for the seals and raise any questions before we price.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- We fit the backing the detail asks for, to the stated depth.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- If an opening needs something other than sealant, we tell you instead of improvising.
Getting the site ready
- Send asbestos survey details if the building is pre-2000
- Let building users know which areas are affected
- Move anything stored against the joints
Request a quote
To get a fixed quote, call the office on 01277 525 020 or email drawings and photos, telling us the site location and the nature of the job. You can also send details through our quote form.
Advice
Aftercare for building managers
Sealant joints are maintenance items, and their life depends on movement, exposure, cleaning and use. We suggest:
- Foam or ordinary sealant is never a fire-seal repair
- Report damaged or disturbed seals as soon as they’re spotted
- File the specified details where the next contractor can find them
- Check risers and ceiling voids after each round of works
New services after handover are a common way fire stopping gets breached. Building it into each contractor’s sign-off keeps the walls intact.
Specify fire stopping early on refits, not as an afterthought. Details can then be picked to suit the actual pipes, cables and ducts, and installation follows the programme.
Your questions answered
Can you work at a site such as West Pitkerro Industrial Estate, by Bucklerheads?
Yes. Estates, retail parks and business parks around Bucklerheads, West Pitkerro Industrial Estate among them, are all within reach. Photos and a short description are enough for a first look.
Which Scottish guidance covers penetration seals in Bucklerheads?
Scotland’s non-domestic Technical Handbook covers it in clause 2.1.14: penetrations keep at least the element’s fire resistance duration, with products tested for their end use. Design sits with the designer and the verifier; installation to the tested detail is our part.
Will you quote for a small job?
We quote for single jobs as well as large packages and programmes. Photos and a description are enough to start.
Do you take on multi-site work?
Yes. Several buildings can share a single quote, with one point of contact.
Do you work in Bucklerheads?
Yes. We take on work across Bucklerheads, with one number for every area we cover.
When can you be on site?
Mention the site’s hours and access windows in your enquiry, and we’ll plan around them. Our office runs Monday to Friday, 8am until 5pm.
Are your applicators CSCS-carded?
Yes. If you need card details for site access, tell us and we’ll confirm them with the quote.
What sets the cost
We price every job individually. The main factors are:
- Backing rod, priming and other preparation
- Any access equipment needed
- How much existing material needs removing
- The total length or number of joints
There’s no price list, because the scope varies so much from one building to the next. For a fixed figure, call for a quote and we’ll price your job on its own details.
Sending details for a quote
The more we know, the firmer the quote. When you get in touch, include:
- Specification clauses that apply
- A wide shot and a close-up of the area
- Where the site is, with the postcode
- Anything awkward about access or site hours
Need a figure for a tender or a budget? Send the scope and any drawings, and we’ll return a fixed quote you can plan around. If you have questions first, phone 01277 525 020 or send photos by email.