Fire stopping in Kingennie
Work needed on a service penetration in Kingennie? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Improvised or mixed-product fire seals
- Old intumescent sealant that has split away
- Open linear gaps along the top of fire-resisting walls
Need fire stopping in Kingennie?
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
How we handle fire stopping in Kingennie
Our applicators are CSCS-carded, and we are CHAS accredited and a Constructionline member. We hold no third-party fire-stopping installer certificate and we’d rather say that up front. What we offer is careful installation of the specified sealant to its tested detail, with a 12-month guarantee on our workmanship. The enquiries we see most involve damaged fire seals in risers and voids and unsealed joints where partitions meet the slab, across cable penetrations, joints between fire-resisting walls and floors and service gaps in risers. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: on jobs in Kingennie, preparation and product choice get the time they need.
For a building near Kingennie, we plan fire-rated sealing so it’s finished in one visit where possible. Send the specification and photographs of the openings, with sizes if you have them.
We stand by our work with a 12-month guarantee. It covers how we prepared and applied the sealant, and if something we did falls short, we return to it.
- Place
- Kingennie (DD5)
- Region
- Angus
- Guarantee
- A 12-month guarantee
- Quotes
- Quoted before any work starts
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Fire stopping around Kingennie: how the place shapes the job
Scotland has its own building standards: the non-domestic Technical Handbook (clause 2.1.14) says service penetrations should be fire stopped to at least the fire resistance duration of the wall or floor, and products should be tested for their end use. We install what’s specified, to the product’s tested detail. A number of hotels sit less than 2 miles from Kingennie. Hotels are divided into compartments, and refurbishments that add pipes and cables through bedroom and corridor walls leave gaps to close.
Industrial units on estates such as West Pitkerro Industrial Estate (to the south-west of Kingennie) often separate offices from warehouse space with fire-resisting walls, and new services through them need the specified seal. Holiday works at schools like Monifieth High School often leave service openings to seal before pupils return.
Kingennie is about 3 miles north of Broughty Ferry, in Angus. Any commercial site in Kingennie is covered, whether it’s a single job or part of a planned programme. Across Angus, 65 places are covered, including Kingennie. We also cover Dundee, around 6 miles from Kingennie.
Commercial sites across DD5 are covered. For a building on Osprey Place, Forbes of Kingennie Drive and Heron Place or nearby, send details and we’ll quote for service penetrations. If your building is just outside Kingennie, we cover Drumsturdy (1 mile south-east), Wellbank (1 mile north-west), Bucklerheads (1 mile west), Newbigging (1 mile east) and Monikie (2 miles north-east). A short drive away, we cover Arbroath (10 miles east), Forfar (9 miles north), Carnoustie (5 miles east), Kirriemuir (13 miles north-west), Hunter's Town (5 miles east) and Gardynebourg (5 miles east).
Landmarks near Kingennie
For rail, the closest station is Monifieth station, roughly 2.6 miles south-east of the centre. Other landmarks nearby include Ashludie Hospital (2.1 miles south-east) and Ballumbie Castle (2.2 miles south-west). Green spaces nearby include Trottick Mill Ponds.
Towns and villages near Kingennie
What else we do in Kingennie
Why deal with it now?
An unsealed opening affects more than fire safety: smoke, noise and draughts pass through them every day. Sealing them to the specified detail deals with the fire risk first, and the other benefits follow. For buildings near Kingennie, dealing with all the failing joints at once saves return trips. Send photographs and we will quote for everything together.
Small jobs and large programmes are priced from the same things: scope, access, product and programme. Call for a quote, and you’ll have a fixed figure to work with.
Why clients in Kingennie choose us
- A fixed quote before work starts
- Old sealant cut out, never sealed over
- Fully insured, including public liability cover
- 12-month guarantee on workmanship
See what affects the cost or our accreditations and insurance.
What the job involves on each surface
Plastic pipes
Waste and drainage pipes through floors are a frequent case. The detail decides whether sealant alone is enough, and we won’t substitute it for a specified collar.
Linear joints
Linear joints run along the head of a wall, at a slab edge or between two fire-resisting elements. BS EN 1366-4 testing sets the joint widths, depths, backing and movement a seal covers, and we work within it.
Diagnose, treat, sign off
Occupied buildings need a little choreography. We sign and contain the area we are in, with routes through the building left open and work section by section so the rest of the building stays in use. Tell us who will meet us and how to get in at your building near Kingennie. We will confirm the plan with the fixed quote.
- First we confirm the product and tested details named in the specification.
- We sort the openings by the detail each one needs.
- Old or wrong materials are cut out.
- Mineral wool or other backing is fitted where required.
- We gun the sealant in to the specified depth around each service and tool it.
- We walk the completed areas with you and confirm the records agreed at quote stage.
Getting the site ready
- Confirm the product named in the specification
- Point out any areas we must not close
- Explain the parking and delivery arrangements
Getting a fixed quote
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. The first step is to ring 01277 525 020 or send photos by email with what you know.
Advice
When to call us in Kingennie
Damage plays a part too. Seals get knocked during maintenance, cut back to add a cable or pulled out when services are swapped and the opening isn’t always resealed.
It’s worth sending us details if you spot any of the following:
- Seals disturbed by maintenance and left open
- Fire stopping installed outside its tested range
- Old intumescent sealant that has split away
- Openings found when ceilings come down for a refit
Large healthcare estates like Ashludie Hospital, 2.1 miles south-east of Kingennie, change their services often, so penetration seals are worth checking after M&E work.
Comparing quotes
- How they handle RAMS and site documents
- The named product and why it was chosen
- Their approach to joint depth and backing
- Their pre-qualification and accreditations
Building owners, agents and FMs in Kingennie
We take on planned maintenance as well as one-off repairs: working through a building or an estate in stages that fit your budget. Sites in Kingennie can sit alongside others in a wider programme.
Hospitality, education, healthcare, office and retail clients come to us directly as well. We plan around the way the building is used, so the building keeps working while we do.
Questions about Kingennie
Can you work at a site such as West Pitkerro Industrial Estate, by Kingennie?
Yes. Estates, retail parks and business parks around Kingennie, West Pitkerro Industrial Estate among them, are all within reach. Photos and a short description are enough for a first look.
Is hospital work, at somewhere like Ashludie Hospital, something you do?
Yes. We work in healthcare settings as well as offices and schools. Each area is agreed with the ward or department and the estates team in advance.
When is resealing likely to be due?
There isn’t a single answer, since movement, weather, cleaning and use all affect it. Regular checks let you plan resealing before leaks or damage.
Do you take on small jobs?
Whatever the size, the process is the same: details, then a fixed price, then sealing, then a 12-month guarantee.
Can you tell us what fire stopping our building needs?
No. Deciding what is needed sits with the designer, fire engineer and building control. Our role is installing what they specify, to the product’s tested detail.
How many days will you need on site?
We plan the time on site around your programme and access. You will have an expected duration with the quote.
What do BS EN 1366-3 and BS EN 13501-2 mean?
The tests are BS EN 1366-3 for penetrations and BS EN 1366-4 for linear joints, and classification is to BS EN 13501-2. An EI 60 seal kept its integrity and insulation for 60 minutes as tested and the installation has to match the test.
General trades versus a specialist
A short, simple internal joint is often within reach of a maintenance team. The usual problems come from preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
The visible bead is only part of the job. Correct depth, the right primer and a sealant matched to the movement are where general trades tend to cut corners.