Fire stopping in Hunter's Town
Work needed on a service penetration in Hunter's Town? We assess it, carry out the work and guarantee our workmanship for 12 months.
- Expanding foam used as fire stopping
- Openings found when ceilings come down for a refit
- Snag lists that include open service penetrations
Fire stopping across Hunter's Town
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Fire stopping for commercial buildings in Hunter's Town
Fire-rated sealant suits many small service penetrations: copper and steel pipes, cables and some small ducts where the tested detail allows. Other openings need collars, wraps, batts, pillows or boards. If the detail calls for something other than sealant, we say so rather than force sealant into it. Most enquiries involve openings found when ceilings come down for a refit and fire sealant pulled out of the opening, on linear gaps at wall heads, joints between fire-resisting walls and floors and cable penetrations. For commercial sealant work in Hunter's Town, you deal with one contact from quote to sign-off, whether it’s one building or several.
In smaller Scottish places like Hunter's Town, buildings with fire-resisting walls typically include schools, care homes, hotels and health centres. Those penetrations are closed with the product the specification names, built up as tested.
Building owners and contractors get the same cover: a 12-month guarantee on our workmanship. Faults in the structure, damage and other trades’ work fall outside it, and we say so plainly.
- Place
- Hunter's Town (DD7)
- Region
- Angus
- Cover
- A 12-month guarantee
- Price
- A fixed quote before we start
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Questions about Hunter's Town
Do you work on fire-rated sealing in hotels in Hunter's Town?
Yes, where the specification calls for fire-rated sealant. Work is done room by room so the hotel keeps trading; design and sign-off stay with the designer and building control.
How do the Scottish rules apply to fire-rated sealing in Hunter's Town?
Scotland’s non-domestic Technical Handbook covers it in clause 2.1.14: penetrations keep at least the element’s fire resistance duration, with products tested for their end use. We install what has been specified, to the manufacturer’s tested detail, while design and approval sit with the designer and the verifier.
When can you be on site?
We are in the office from 8am until 5pm, Monday to Friday. Tell us your site hours and access windows and the work will be fitted around them.
Can you work while the building is occupied?
Yes, as long as we plan it. Tell us your site hours and access windows and we’ll plan around them.
Can weather delay the job?
It can, for external work. Sealant won’t bond properly to a wet or frosty joint, so we watch the forecast and rearrange outside work if we have to. Indoors, the weather is rarely a problem.
Do you have public liability insurance?
Yes. Our insurance certificate can be sent alongside the quote.
Can you send site paperwork?
Tell us what site paperwork you need (RAMS, insurance certificate, CSCS details) and we will confirm with the quote.
After the work
For the best life from the joints:
- Look above ceilings when tiles are lifted for other jobs
- Have penetrations checked while they can still be seen
- Leave fire sealant to cure fully before covering it
- Keep general-purpose fillers away from compartment walls
During planned inspections, look at seals in risers, cupboards and voids. Watch for cracked sealant, new services with no seal and openings that have grown.
The simplest way to keep compartment walls intact is to plan fire stopping into every job that crosses them. Then the seal goes in while the area is open instead of being left for someone else.
Compartment walls and floors in Hunter's Town
Scottish guidance (non-domestic Technical Handbook, clause 2.1.14) asks that penetrations match at least the fire resistance period of the element they pass through, with proprietary products, intumescent ones included, tested for their end use. We install fire-rated sealant to that tested detail where it is specified. Hunter's Town has several hotels close by, all within 2 miles. Hotels are divided into compartments, and refurbishments that add pipes and cables through bedroom and corridor walls leave gaps to close.
Hotels like Carnoustie Golf Hotel, 0.5 miles to the south-east of Hunter's Town, are refurbished in phases, and each phase can open up compartment walls. Schools such as Carnoustie High School often have new data and services installed during holidays, and penetrations through fire-resisting walls should be checked afterwards.
Hunter's Town is about 1 mile west of Carnoustie, in Angus. Looking for fire stopping in Hunter's Town? We can help. 65 places across Angus fall within our area, Hunter's Town among them. There’s a separate page for Dundee, roughly 10 miles from Hunter's Town.
Work on service penetrations is covered throughout DD7. Buildings on Barry Road, Lochend Road and Maclagan Road are within our area for service penetrations. Access to Hunter's Town is via the A930. Sites close to Hunter's Town are covered too, including Gardynebourg (1 mile south-west), Carnoustie (1 mile east), Clayholes (1 mile north), Carlogie (1 mile north-east) and Barry (1 mile west). Nearby towns on our patch include Arbroath (7 miles north-east), Forfar (12 miles north-west), Monifieth (4 miles west), Letham (9 miles north), Friockheim (10 miles north) and Liff (13 miles west). As one of the bigger centres in Angus, Hunter's Town has a broad mix of commercial, public and industrial buildings.
Near you in Hunter's Town
There’s a railway station in Hunter's Town itself: Golf Street station. Nearby you will also find Panmure Castle (2 miles north) and Ashludie Hospital (3.6 miles west).
Nearby places to Hunter's Town
Also in Hunter's Town
Different surfaces, different methods
Cables and cable bundles
New data and power cables are the most common breach we see. We reseal around them to the specified detail, and we tell you if the bundle exceeds what sealant covers.
Drylining partitions
Holes in board are often cut larger than needed. If the gap exceeds the tested range, sealant alone won’t do and we’ll tell you what the detail says instead.
Signs you need fire stopping in Hunter's Town
Openings in fire-resisting walls usually appear when services are added or changed. A new cable pulled by an electrician, a pipe rerouted by a plumber or a data run drilled through a riser leaves an opening that nobody returns to. Across several fit-outs, the openings add up.
What tends to prompt an enquiry:
- Head-of-wall gaps with no fire seal
- Seals that don’t match their tested detail
- Fire seals cut back for extra cables and never reinstated
- Penetration schedules that need working through
Older community buildings such as Carnoustie Parish Church that have been rewired or given new heating can have service gaps through walls worth checking against the specification.
Before you book anyone
- How the joint faces will be prepared and primed
- How the existing material will be dealt with
- Their plan for phasing and protecting the area
- Health and safety accreditation such as CHAS
How a job runs
We begin with a short walk round with whoever looks after the building, to confirm the scope, the order of work and any areas we must keep clear. Then we strip out anything that has failed, prepare every joint and seal it. Travel to smaller Scottish places like Hunter's Town is planned so the job is finished in one visit where possible, so photos, sizes and a full list matter. Outside work also needs a suitable weather window.
- We read the specification, drawings or penetration schedule you send.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Unsuitable fillers and loose debris are taken out of each opening.
- Mineral wool or other backing goes in wherever the detail asks.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
Preparing the site
- Agree which areas must stay open
- Point out parking and an unloading spot
- For older buildings, check the asbestos register before work
Quotes
Pricing a project or setting a maintenance budget? We will quote against your scope and drawings that you can work with. If you have questions first, call 01277 525 020 or send details through our quote form.
Read more
Quoting for work in Hunter's Town
Sealant work doesn’t have a standard rate, since sites vary so much. What we look at:
- Removal of failed or old sealant
- The total length or number of joints
- Working within restricted access windows
- Which sealant the job calls for
The product called for affects the cost, as does the preparation each joint needs, from cutting out to priming and backing rod. Access, phasing and site requirements come into it too.
Sending details for a quote
A good diagnosis starts with the right details. Let us know:
- The postcode of the building
- Your programme or deadline
- Access details, including height
- Whether an asbestos survey exists
We quote a fixed sum against the scope you give us, so you know the figure before anyone is on site. To ask for one, call the office on 01277 525 020 or send details through our quote form.
When to bring in a specialist
Some joints are best left to specialists: for instance fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. Getting these wrong usually costs more in the end than doing them right.
General builders and handymen seal joints, but it isn’t their main trade. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint, which is what makes a joint last.