Fire Stopping in New Pound
Fire-rated and intumescent sealing of service penetrations and linear gaps across New Pound, carried out by CSCS-carded applicators. CHAS accredited and fully insured.
- Builders’ foam or ordinary silicone in compartment walls
- Fire sealant pulled out of the opening
- Fire-stopping items raised at inspection or handover
Fire stopping near New Pound
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Fire stopping for commercial buildings in New Pound
Our applicators are CSCS-carded, and we are CHAS accredited and a Constructionline member. We don’t hold a third-party fire-stopping installer certificate, and we won’t pretend otherwise. What we offer is careful installation of the specified sealant to its tested detail, with a 12-month guarantee on our workmanship. We work on cable penetrations, joints between fire-resisting walls and floors and pipe penetrations, and the usual reasons a site gets in touch are builders’ foam or ordinary silicone in compartment walls and unsealed openings around new pipes and cables. Facilities teams, main contractors and managing agents in New Pound tend to want the same three things: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
Around smaller places like New Pound, penetration seals come up in schools, halls, pubs with rooms, care homes and farm buildings used as offices. Any service penetration through those walls should be closed with the specified product, set out as its test evidence shows.
We stand by our work: 12 months, guaranteed. It covers how we prepared and applied the sealant, and we come back if anything isn’t right.
- Location
- New Pound (ME18)
- Wider area
- Kent
- Cover
- A 12-month guarantee
- Price
- A fixed quote before we start
- Call
- 01277 525 020
- Last updated
- 3 November 2026
What sealant work can’t fix
Before quoting, we check that sealant is the right answer. It isn’t the answer for:
- Issuing fire ratings or certificates for seals
- Designing or specifying fire stopping, which sits with the designer or fire engineer
- Plastic pipes whose detail calls for a collar or wrap
Not sure which it is? You can give us a call on 01277 525 020 or send photos by email and we will tell you honestly before you book.
Where we work in New Pound
- Service gaps in risers
- Cable penetrations
- Linear gaps at wall heads
- Joints between fire-resisting walls and floors
- Pipe penetrations
- Small duct penetrations where the tested detail allows
Service penetrations in New Pound buildings
For England, the fire stopping of penetrations is dealt with in Approved Document B. References to the older BS 476 classes are being removed from it from 2 September 2029, after which the European classification, BS EN 13501-2, is the route, subject to transitional arrangements. What we install is set by the specification, and it goes in to the tested detail. Central London is about 25 miles from New Pound. Offices around the capital are refitted often, and the cabling that follows can breach fire-resisting walls; the gaps need the specified seal.
For a building such as St Lawrence's Church, new heating or data runs are the usual reason penetrations need sealing. Hospital estates such as Maidstone Hospital, 5.2 miles to the east of New Pound, are divided into fire compartments, and any service penetration through them should be sealed to the specified, tested detail.
New Pound is about 6 miles north-east of Tonbridge, in Kent. Our applicators travel to New Pound for work on service penetrations. Across Kent, 931 places are covered, including New Pound. London is covered too, some 25 miles away.
Commercial sites across ME18 are covered for service penetrations. We cover commercial and managed buildings on Beech Road, Newpound Lane and Seven Mile Lane and the roads nearby. Nearby places we also cover include Herne Pound (1 mile east), Swanton (1 mile south-west), Mereworth (1 mile south-east), Kent Street (1 mile east) and West Peckham (1 mile south) for service penetrations. A short drive away, we cover Maidstone (7 miles east), Dartford (14 miles north-west), Sevenoaks (8 miles west), Royal Tunbridge Wells (10 miles south-west), Gravesend (11 miles north) and Tonbridge (6 miles south-west).
Near you in New Pound
Recent enquiries here include premises near The Queens Head Public House. The closest station to New Pound is Wateringbury station, roughly 2.8 miles south-east of the centre. Nearby you will also find Maidstone Hospital (5.2 miles east) and Beechin Wood Archery Museum (1.8 miles north-west).
What the job involves on each surface
Small ducts
Small ductwork can sometimes be sealed with sealant where the tested detail includes it. Bigger ducts and fire-resisting ductwork are normally handled with other products.
Cables and cable bundles
Single cables and small bundles are often within a fire-rated sealant’s tested detail. The detail limits bundle size and the gaps between and around cables and we work within those limits.
Questions about New Pound
Is New Pound too small for you to travel to?
No. Small places get the same service as large ones. Our area covers London and the South East counties. Good photos up front let us bring everything on the first visit.
What happens to BS 476 references for fire stopping in New Pound?
Approved Document B loses its BS 476 references from 2 September 2029, and BS EN 13501-2 becomes the route, subject to transitional arrangements. The designer or fire engineer sets the specification, and we install the product to the manufacturer’s tested detail.
Can you quote from photos?
That depends on the size and complexity of the job. Straightforward work can often be priced from photographs and measurements, and bigger or more complex jobs typically get a visit.
Can the sealant be colour-matched?
It depends on the product specified. Some ranges are wide, others limited, so we’ll confirm the colours available for the specified product with the quote.
Do you hold CHAS accreditation?
Yes. Mastic Doctor is CHAS accredited and a Constructionline member.
Does weather matter for sealant work?
Outside, yes. The joint has to be dry and within the product’s temperature range, so frost, rain or cold mornings can delay outside work. Internal work is rarely affected.
Do you take on small jobs?
Small jobs are welcome alongside larger packages. Send details for a fixed quote.
Keeping the joints sound
Once the work is signed off, these steps help:
- Leave fire sealant to cure fully before covering it
- Settle who seals which penetrations at the start of a project
- Have penetrations checked while they can still be seen
- Make fire stopping part of every scope that crosses a fire-resisting wall
Add risers, plant rooms and ceiling voids to routine fire-stopping checks. Watch for cracked sealant, new services with no seal and openings that have grown and get them dealt with.
Specify fire stopping early on refits, not as an afterthought. The designer can then choose details that suit the services planned, and the work runs in step with the M&E.
Nearby places to New Pound
What else we do in New Pound
Commercial clients in New Pound
CHAS accredited and a Constructionline member, we are straightforward to vet for your supplier list. We are fully insured, and our insurance certificate can go with the quote.
Whether you are a managing agent, a property factor or an owner’s representative: send the details, accept a fixed quote, and we carry out and guarantee the work. Keys, access and contacts can be agreed in advance.
Signs you need fire stopping in New Pound
Mixing products or improvising a detail breaks the link with the test evidence. Gaps beyond the tested size, shallow sealant, no backing where it was needed, or products from different systems mixed together are what we find most often.
It’s worth sending us details if you spot any of the following:
- Seals that don’t match their tested detail
- Penetration schedules that need working through
- Open linear gaps along the top of fire-resisting walls
- Builders’ foam or ordinary silicone in compartment walls
In a school such as Mereworth Community Primary School, fire-rated sealant goes in around service penetrations where it is specified.
What to look for in a quote
- Will RAMS and insurance details be available?
- How they’ll work around occupants
- How long is the guarantee, and what does it include?
- Proof of insurance
On site: what to expect
Site rules come first: signing in, inductions and any permit to work. With the paperwork done, we take the joints in the sequence agreed with you. For work around New Pound, we aim to finish in one visit, so we ask for photographs and rough sizes first. That way the right products come on the day.
- First we confirm the product and tested details named in the specification.
- Openings are measured and grouped by detail.
- Old or wrong materials are cut out.
- Mineral wool or other backing is fitted where required.
- We gun the sealant in to the specified depth around each service and tool it.
- Completed areas are checked with you, with the records agreed when we quoted.
Before we start on site
- Let building users know which areas are affected
- Share your working hours and any access restrictions
- Flag any permit to work we will need
Getting a fixed quote
Photos, drawings or a schedule of the joints are often enough for a fixed quote. Where a site visit makes more sense, we’ll arrange one.