Swanton fire stopping
Fire stopping in Swanton, backed by over 20 years in commercial sealing. Fully insured, with a 12-month guarantee.
- Builders’ foam or ordinary silicone in compartment walls
- Seals that don’t match their tested detail
- Open linear gaps along the top of fire-resisting walls
Fire stopping across Swanton
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Fire stopping in Swanton
Opened ceilings and riser doors often reveal service openings nobody sealed. Where the walls and floors already have a fire-stopping specification, we can work to it using the product and detail it sets out. Where there isn’t one, the designer or fire engineer needs to set one first. We work on cable penetrations, pipe penetrations and service gaps in risers, and the usual reasons a site gets in touch are seals disturbed by maintenance and left open and fire-stopping items raised at inspection or handover. For commercial sealant work in Swanton, you deal with one contact from quote to sign-off, whether it’s one building or several.
A job near Swanton is typically planned around one visit, with the specification and photos sent in advance. Design and sign-off belong to the designer or building control; we install what’s specified.
Guaranteed is the last step of every job. You get a 12-month guarantee on our workmanship, and we explain exactly what that covers when we quote.
- Location
- Swanton (ME18)
- Wider area
- Kent
- Guarantee
- 12 months on our workmanship
- Price
- A fixed quote before we start
- Call
- 01277 525 020
- Page updated
- 3 November 2026
Quoting for work in Swanton
The price varies from site to site. It mainly depends on:
- The product specified
- How much existing material needs removing
- Travel to remote or island sites
- The size and state of each joint
The price depends on how many linear metres there are, what has to come out first and how the joints are reached. Call for a quote when you’re ready.
Details that help us quote
For an accurate fixed quote, we need to understand the site. Useful things to include:
- Photos of the joints, close up and from further back
- When you need the work done
- The type of building and who uses it
- How the joints are reached, and at what height
Photos, drawings or a schedule of the joints and a fixed quote comes back to you. Where a site visit makes more sense, we’ll arrange one.
Maintenance after handover
Problems stay small when the joints are checked regularly. In particular:
- Brief every trade that openings they make must be sealed
- Check risers and ceiling voids after each round of works
- Keep general-purpose fillers away from compartment walls
- Arrange inspection before areas are covered up
New services after handover are a common way fire stopping gets breached. Building it into each contractor’s sign-off keeps the walls intact.
Looking at service areas on a regular cycle pays off. A cracked or disturbed seal found early is a small job compared with dozens found at once.
From enquiry to sign-off
Occupied buildings need a little choreography. The work area is signed and kept contained, with routes through the building left open and work section by section so the rest of the building stays in use. Jobs in and around smaller places like Swanton are usually planned as a single visit, so photographs and measurements up front really help. That way the right products come on the day.
- We start with your penetration schedule, drawings or specification.
- Access, permits and the order of areas are agreed with the site team.
- We compare every service penetration with its tested detail before sealing.
- Unsuitable material is removed and the opening cleaned so the seal starts clean.
- Backing and fire-rated sealant are installed to the detail and tooled.
- Anything outside the detail is reported to you rather than sealed.
Getting the site ready
- Have the specification and drawings to hand
- Move anything stored against the joints
- Let building users know which areas are affected
Getting a fixed quote
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. The first step is to ring 01277 525 020 or use the quote form with what you know.
Advice
Towns and villages near Swanton
More services for Swanton
What we can’t put right
Before quoting, we check that sealant is the right answer. It isn’t the answer for:
- Issuing fire ratings or certificates for seals
- Reviewing a building’s overall fire safety
- Deciding what a wall or floor needs, which belongs to the designer
Not sure which it is? You can phone 01277 525 020 or use the quote form and we will tell you honestly before you book.
Surfaces we seal
- Joints between fire-resisting walls and floors
- Small duct penetrations where the tested detail allows
- Cable penetrations
- Pipe penetrations
- Linear gaps at wall heads
- Service gaps in risers
Surface by surface
Linear joints
Head-of-wall joints often have to absorb slab deflection. The specified product and backing for that movement are what goes in, along the full length of the run.
Cables and cable bundles
Single cables and small bundles are often within a fire-rated sealant’s tested detail. The detail limits bundle size and the gaps between and around cables, so we check before sealing.
Work for main contractors and building owners
Building owners and managing agents use us on everything from one building to a spread of sites. Several sites can go on one quote, so there’s one set of paperwork to deal with.
We take on planned maintenance as well as one-off repairs: working through a building or an estate in stages that fit your budget. Sites in Swanton can sit alongside others in a wider programme across Kent.
Common questions from Swanton clients
Is Swanton off your patch?
Not at all. Swanton is within our area. Our area covers London and the South East counties. Good photos up front let us bring everything on the first visit.
How does the move away from BS 476 affect penetration seals in Swanton?
Approved Document B loses its BS 476 references from 2 September 2029, and BS EN 13501-2 becomes the route, subject to transitional arrangements. Our part doesn’t change: the specified product, to its tested detail.
Do you need to see the site first?
Photos, drawings or a schedule are often enough to quote. Where they aren’t, we arrange a site visit.
When can the area be used after sealing?
We’ll confirm how long the chosen product needs to cure, and sign any area that should be left alone.
Are your applicators CSCS-carded?
Yes. Should the site need card details in advance, tell us and we will confirm them with the quote.
How long does a typical visit take?
It depends on the scope, but the work normally takes anything from one day to a planned run of visits, depending on the number of seals and the access. For bigger or phased jobs, we will set out a timescale with the quote.
Do you offer coloured sealant?
It depends on the product. Some ranges offer many colours, others very few, so we will confirm the colours available for the specified product with the quote.
Where services cross fire walls in Swanton
Approved Document B is the English guidance that covers fire stopping around openings and penetrations. From 2 September 2029, BS 476 references are being taken out of Approved Document B, leaving BS EN 13501-2 classification as the route, subject to the Government’s transitional arrangements. We install whatever has been specified, to the product’s tested detail. At about 26 miles from central London, Swanton is within reach of the capital. Offices around the capital are refitted often, and the cabling that follows can breach fire-resisting walls; the gaps need the specified seal.
Colleges such as Hadlow College (to the south-west of Swanton) add IT and services as courses change, and each new penetration through a fire-resisting wall needs sealing with the specified product. Holiday works at schools like Mereworth Community Primary School often leave service openings to seal before pupils return. For a unit at a site such as The Alders Industrial Estate (0.9 miles south-east of Swanton), new power or data runs between office and warehouse can breach a compartment wall.
Swanton is about 5 miles north-east of Tonbridge, in Kent. Our applicators travel to Swanton for work on service penetrations, handled exactly as we handle every other area. Our Kent coverage takes in 931 places, large and small. Our London page has more on work in that area.
We take on service penetrations across the ME18 postcode area, for business premises of every kind. If your building is just outside Swanton, we cover West Peckham (1 mile south), New Pound (1 mile north-east), Mereworth (1 mile east), Herne Pound (1 mile north-east) and Roughway (1 mile west). Further afield, our area takes in Maidstone (8 miles east), Dartford (14 miles north-west), Sevenoaks (7 miles west), Royal Tunbridge Wells (9 miles south-west), Gravesend (12 miles north) and Tonbridge (5 miles south-west).
What’s near Swanton
We work on buildings around Swan on the Green pub and the streets around them. Swanton’s nearest station is Wateringbury station, roughly 3 miles east. Other landmarks nearby include Beechin Wood Archery Museum (2 miles north-west) and Ightham Court (3.8 miles north-west).