New Pound expansion joint sealing
Expansion joint sealing in New Pound, backed by over 20 years in commercial sealing. Fully insured, with a 12-month guarantee.
- Brittle, chalky sealant on external joints
- Leaks through car park deck joints onto the level below
- Rain penetration at brick or block movement joints
Expansion joint sealing across New Pound
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Expansion joint sealing in New Pound, done properly
The seal is what lets a movement joint do its job. When the sealant splits or lets go, the gap fills with dirt and water; the joint jams, its edges take the load and the arrises spall. Dealt with early, it stays a sealant job rather than a concrete or masonry repair. If you are dealing with chipped joint edges on forklift routes and expansion joints split through the centre of the bead, we can put it right. Looking for mastic applicators who cover New Pound? We’ve been sealing commercial buildings since 2005, with CSCS-carded applicators.
Around smaller places such as New Pound, floor joints are often in barns and farm buildings turned into workshops, stores and offices. Joints in those slabs take vehicles, trolleys and foot traffic, and need a filler or sealant to match.
The 12-month guarantee is for workmanship rather than wear and tear. Sealant wears with time, and movement, weather, cleaning and use decide how fast, so we spell out the cover before we begin.
- Place
- New Pound (ME18)
- Region
- Kent
- Cover
- 12 months on every job
- Quotes
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Last updated
- 3 November 2026
On site: what to expect
When we get to site, we report to your site contact and complete whatever induction the building runs. Floors, finishes and fittings next to the joints are covered before anything is cut or cleaned, with the work itself usually taking a few hours to several weeks, depending on how many metres of joint there are and how much old sealant or filler needs removing. For a building around New Pound, tell us how to find it and who will meet us. Add it to your enquiry and we will build it into the plan.
- First, the joints are inspected for width, movement and the type of failure.
- Next, we fix a price and confirm the sealant we propose for the movement.
- Old sealant and filler are cut out and the joint faces cleaned back to sound material.
- Backing rod goes in at the right depth, or bond-breaker tape where the joint is shallow.
- After any primer the maker requires, the bead is applied and tooled so it grips two sides only.
- Each joint is inspected and handed over with our 12-month guarantee.
What we need from you
- Let us know about inductions and permits
- Have the specification and drawings to hand
- Tell us which areas need to stay in use
Request a quote
Every quote starts with the facts: the joints involved, quantities, access and the product called for. Share whatever details you have and we will fill any gaps with a visit.
Read more
Warehouse floors and decks around New Pound
The 3 miles around New Pound take in at least three named trading estates, business parks or retail parks. Floors, loading bays and yards on sites like these are where floor and movement joints work hardest. The South East is one of the drier parts of the UK. External joints still wait for dry conditions, and gritting in cold spells finds its way into open joints.
On industrial estates such as The Alders Industrial Estate, 1.1 miles south-east of New Pound, saw-cut floor joints, loading bay slabs and yard joints take the heaviest traffic. Schools such as Mereworth Community Primary School have movement joints in their walls and floors that are easy to overlook. At places like Mereworth Business Centre, 1.6 miles east of New Pound, joints are sealed a section at a time so operations carry on.
New Pound is about 6 miles north-east of Tonbridge, in Kent. New Pound sits inside our coverage, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. New Pound is one of 931 places in Kent on our list. We also cover London, around 25 miles from New Pound.
Postcode districts covered here: ME18 for movement joints. If your site is on Beech Road, Newpound Lane and Seven Mile Lane or close by, send details and we will quote for movement joints. Nearby places we also cover include Herne Pound (1 mile east), Swanton (1 mile south-west), Mereworth (1 mile south-east), Kent Street (1 mile east) and West Peckham (1 mile south). Bigger towns within reach include Maidstone (7 miles east), Dartford (14 miles north-west), Sevenoaks (8 miles west), Royal Tunbridge Wells (10 miles south-west), Gravesend (11 miles north) and Tonbridge (6 miles south-west).
Near you in New Pound
Locally, jobs take us to sites close to The Queens Head Public House. The closest station to New Pound is Wateringbury station, roughly 2.8 miles south-east of the centre. Nearby you will also find Maidstone Hospital (5.2 miles east) and Beechin Wood Archery Museum (1.8 miles north-west).
Doing it in-house
There’s also the paperwork. Many sites expect CSCS cards, RAMS and proof of insurance, and our CSCS-carded applicators are used to working under those rules.
Site maintenance staff can often handle a short internal joint. The usual problems come from preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
What sets the cost
A fixed quote reflects the actual work. It allows for:
- Induction, permit and paperwork requirements
- The total length or number of joints
- The product specified
- Phasing around occupants
The product called for affects the cost, and so does the preparation, such as cutting out, priming or new backing rod. Access, phasing and site requirements come into it too.
Details that help us quote
A good diagnosis starts with the right details. Tell us:
- Whether the building will be occupied during the work
- Specification clauses that apply
- How the joints are reached, and at what height
- The asbestos register, for older buildings
The quickest route to a quote is a few photographs and the site postcode. Send them through the quote form, or give us a call on 01277 525 020 or send details through our quote form if you’d rather talk the job through.
Why it’s worth doing now in New Pound
Some quotes just add sealant over the old bead. A bead laid on top of the failed one neither grips nor flexes properly and soon lets go. Full removal and preparation is in every quote. One visit to deal with every failing joint makes more sense than several trips to a place like New Pound, rather than one at a time. Photos of every joint help us quote for the whole job.
The work involved drives the cost: stripping out, preparation, sealing, access and phasing. Call for a fixed quote.
Why clients in New Pound choose us
- Old sealant cut out, never sealed over
- Fixed quotes based on photos, drawings or a visit
- Over 20 years of commercial sealing
- CHAS accredited
See our cost guide and how we’re accredited.
Questions about New Pound
Is hospital work, at somewhere like Maidstone Hospital, something you do?
Yes, provided the work is planned with the site’s estates team. Each area is agreed with the ward or department and the estates team in advance.
Is New Pound off your patch?
Not at all: smaller places are covered as well as towns. London and every South East county are within our area. Good photos up front let us bring everything on the first visit.
How long do sealant joints last?
There isn’t a single answer, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular inspection is the best way to catch problems early.
Can you work to our specification?
Yes. Send it with your enquiry, and the quote will be based on it.
How long will the joint resealing take?
Expect a day or so for a modest run of joints, and longer where decks, ramps or floors are done in phases. We’ll confirm when each area can be used again.
How do you choose the sealant?
A specification, where there is one, decides it. Without one, the joint decides: its movement, its surfaces and what it has to cope with.
Which product is best for expansion joints?
The specification comes first, then the joint’s movement and exposure. The quote states the sealant and its movement class, so you know what’s going in.
Different surfaces, different methods
Cladding panel joints
Access to cladding joints is agreed before the price is fixed. Photos taken near the joints help us price accurately or a site visit fills the gaps.
Concrete and precast panel joints
Joints between precast panels open and close with temperature and loading. The sealant needs the right movement capability and a controlled depth.
Honest limits
We check first that sealant really is the fix. It isn’t the answer for:
- Movement on a scale no sealant is meant to absorb
- Broken or spalled joint edges, which need repairing before any sealant goes in
- Proprietary pre-formed expansion joint systems
Not sure which it is? You can call 01277 525 020 or send photos by email and we’ll tell you honestly before you book.
Where we work in New Pound
- Podiums and floor movement joints
- Cladding panel joints
- Precast concrete panel joints
- Car park decks and ramps
- Blockwork control joints
- Brickwork movement joints