Fire stopping in Kent Street
Looking for fire stopping in Kent Street? It’s simple: send details, get a quote, we seal, guaranteed.
- Builders’ foam or ordinary silicone in compartment walls
- Old intumescent sealant that has split away
- Unsealed openings around new pipes and cables
Fire stopping for Kent Street sites
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Cost factors for service penetrations
Your fixed quote is built from the real scope. It takes account of:
- Whether old sealant has to be cut out first
- Distance, for remote addresses
- Which sealant the job calls for
- Induction, permit and paperwork requirements
Quantities, awkward access and phased working all shape the price. Site requirements like inductions and permits play a part as well.
What we need to price the job
The more we know, the firmer the quote. When you get in touch, include:
- Any specification or named product
- Rough lengths or quantities, or drawings if you have them
- Asbestos survey details if the building is older
- What the building is and how it’s used
Tell us about the building, the joints and when you need the work done, and a fixed quote will follow. The easiest way is to call 01277 525 020 or send details through our quote form.
Fire stopping in Kent Street
We are commercial sealant applicators, CHAS accredited and a Constructionline member, with CSCS-carded applicators on site. We hold no third-party fire-stopping installer certificate and we’d rather say that up front. We install the specified fire-rated sealant to its tested detail, and our workmanship carries a 12-month guarantee. Site teams most often ask us about fire seals cut back for extra cables and never reinstated and unsealed penetrations discovered above suspended ceilings, across service gaps in risers, joints between fire-resisting walls and floors and small duct penetrations where the tested detail allows. A specialist sealant contractor works differently from a general builder: on jobs in Kent Street, preparation and product choice get the time they need.
For a smaller site near Kent Street, we plan to do all the penetrations in one go, with the specification and photographs sent in advance. Design and sign-off belong to the designer or building control; we install what’s specified.
Every job we finish is backed by a 12-month workmanship guarantee, wherever the site is. If a joint we sealed fails because of how it was installed, we come back and put it right.
- Place
- Kent Street (ME18)
- Region
- Kent
- Cover
- 12 months on our workmanship
- Quote
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
Towns and villages near Kent Street
Other services in Kent Street
Questions we are asked in Kent Street
How does the move away from BS 476 affect penetration seals in Kent Street?
From 2 September 2029, Approved Document B drops its BS 476 references in favour of BS EN 13501-2 classification, with transitional arrangements. The designer or fire engineer sets the specification, and we install the product to the manufacturer’s tested detail.
Is a smaller place like Kent Street outside your area?
No. Small places get the same service as large ones. Our area covers London and the South East counties. Good photos up front let us bring everything on the first visit.
Can you follow the specification on our project?
Yes. Include it with the drawings when you ask for a quote, and the quote will be based on it.
Do you guarantee your work?
Yes, for 12 months. If a joint fails because of how we installed it, we come back and put it right.
Do you take on multi-site work?
Yes. A group of buildings can go on one quote, and you deal with one contact throughout.
Do you need to see the site first?
Photos, drawings or a schedule are often enough to quote. Where they aren’t, we arrange a site visit.
What will the job cost?
We don’t publish prices, because every site is different. With photographs or drawings, we can give you a fixed quote.
When to bring in a specialist
Site maintenance staff can often handle a short internal joint. The usual problems come from preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
Paperwork matters too. Many sites expect CSCS cards, RAMS and proof of insurance, and our CSCS-carded applicators are used to working under those rules.
After the work
Cleaning and maintenance staff play a part too. Share these points with them:
- Flag new cables with no seal around them
- Get seals inspected before ceilings and boxing close
- Don’t let anyone top up a fire seal with the wrong product
- Keep product data and details in the fire safety file
Don’t patch a fire-rated seal with anything outside its tested detail. A repair should use the original product, installed the same way.
Specify fire stopping early on refits, not as an afterthought. Details can then be picked to suit the actual pipes, cables and ducts.
On site: what to expect
Inspect, seal, sign off: that’s the shape of every visit. First comes an inspection and agreement on scope, then the work is carried out to the specified product and detail, and the job ends with a walk round and sign-off. For work around Kent Street, we aim to finish in one visit, so we ask for photos and rough sizes first. That way the right products come on the day.
- The specification and schedule come first, so we know which details apply.
- We plan the sequence of floors, risers and voids with you.
- We compare every service penetration with its tested detail before sealing.
- Foam, ordinary sealant and debris come out.
- The specified backing and sealant go in to depth and are finished neatly.
- Anything outside the detail is reported to you rather than sealed.
Preparing the site
- Have the specification and drawings to hand
- Flag any permit to work we’ll need
- Agree which areas must stay open
Request a quote
For a fixed quote, phone 01277 525 020 or email drawings and photos. Our quote form is another easy route.
Read more
Compartments and services around Kent Street
For England, the fire stopping of penetrations is dealt with in Approved Document B. References to the older BS 476 classes are being removed from it from 2 September 2029, after which the European classification, BS EN 13501-2, is the route, subject to transitional arrangements. What we install is set by the specification, and it goes in to the tested detail. Kent Street is about 26 miles from central London. Business park offices in the commuter belt are refitted as tenants change, and each fit-out adds services through compartment walls.
Large healthcare estates like Maidstone Hospital, 4.3 miles to the east of Kent Street, change their services often, so penetration seals are worth checking after M&E work. Campus buildings at universities such as University for the Creative Arts - Maidstone, 5 miles to the east of Kent Street, see constant changes to data and services, and fire-rated sealant goes in around new penetrations where it is specified. Schools such as Kings Hill School often have new data and services installed during holidays, and penetrations through fire-resisting walls should be checked afterwards.
Kent Street is about 6 miles west of Maidstone, in Kent. If you’re looking for fire stopping in Kent Street, we can help. Kent Street is one of 931 places we cover in Kent. There’s a separate page for London, about 26 miles away.
Postcode districts covered here: ME18. Buildings on Kent Street and Malling Road are within our area. We also cover Herne Pound (1 mile south-west), Mereworth (1 mile south), New Pound (1 mile west), Pizien Well (1 mile south-east) and Swanton (1 mile south-west) for service penetrations. Bigger towns within reach include Maidstone (6 miles east), Dartford (14 miles north-west), Sevenoaks (9 miles west), Royal Tunbridge Wells (10 miles south-west), Gravesend (11 miles north) and Tonbridge (7 miles south-west).
Local landmarks in Kent Street
Locally, jobs take us to sites close to The Queens Head Public House and Manor Park Country Park, among other places. Kent Street’s nearest station is Wateringbury station, about 2.1 miles south-east of the centre. A little further out are Beechin Wood Archery Museum (2.5 miles north-west) and Maidstone Hospital (4.3 miles east).
For managing agents and facilities managers
We work for building owners and managing agents on everything from one building to a spread of sites. One quote can cover more than one site, which keeps the paperwork simple.
If you look after buildings for someone else, clear figures and clear communication matter. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative, plus a 12-month guarantee.
What the job involves on each surface
Small ducts
Ducts are only sealed with sealant where the detail allows it. Dampers and ductwork systems themselves are outside our work.
Metal pipes
Heat travels along metal pipework. If the detail needs something beyond sealant, we tell you.