Fire stopping in Murthly
Our CSCS-carded applicators take on fire-rated and intumescent sealing of service penetrations and linear gaps in Murthly and the surrounding area. Send details for a fixed quote.
- Unsealed joints where partitions meet the slab
- Unsealed penetrations discovered above suspended ceilings
- Old intumescent sealant that has split away
Fire stopping across Murthly
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Cost factors for service penetrations
Before we quote, we look at:
- How much existing material needs removing
- The size and state of each joint
- Distance, for remote addresses
- How much there is to seal
Access can matter as much as the joints themselves: joints within easy reach take less time than ones that need access equipment. Mention the access as part of your enquiry.
Details that help us quote
It doesn’t need to be a full survey. These details are enough to start:
- Rough lengths or quantities, or drawings if you have them
- Your programme or deadline
- How the joints are reached, and at what height
- The asbestos register, for older buildings
Photos, drawings or a schedule of the joints and a fixed quote comes back to you. If the job needs a look first, we’ll arrange a site visit.
Fire stopping in Murthly
Most of our fire stopping work happens after the building is up. New cable runs, replaced pipework and extra data routes all punch holes in compartment walls, often unnoticed. Those on your schedule are closed with the specified product. We work on service gaps in risers, cable penetrations and linear gaps at wall heads, and the failures we are asked to look at most are non-fire-rated filler around services and hidden openings found during inspections. Whoever orders the work in Murthly, the brief is normally the same: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
Hotels and care homes around smaller places like Murthly often have services added during refurbishment. We fit the specified fire-rated sealant as its published detail shows and raise it if another product is needed.
The 12-month guarantee covers our workmanship: the preparation, the sealing and the tooling. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.
- Where
- Murthly (PH1)
- Region
- Perth and Kinross
- Cover
- A 12-month guarantee
- Price
- A fixed quote before we start
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
Nearby places to Murthly
Other services in Murthly
On site: what to expect
At the end of each section, the masking comes off, the area is cleaned and every joint is checked, ready for your sign-off. If an area should be left alone while the sealant cures, we say how long and put signs out. Where we can, we combine work around Murthly with other jobs nearby. Tell us how flexible your dates are.
- We start with your penetration schedule, drawings or specification.
- We plan the sequence of floors, risers and voids with you.
- We compare every service penetration with its tested detail before sealing.
- Unsuitable material is removed and the opening cleaned.
- Backing and fire-rated sealant are installed to the detail and tooled.
- Anything outside the detail is reported to you rather than sealed.
What we need from you
- Tell us what induction or permit system the site runs
- Agree which areas must stay open
- Tell staff and tenants when we’ll be in
Get a fixed quote
Quotes are fixed against the scope you send, so you know the figure before anyone is on site. To ask for one, phone 01277 525 020 or email the details over.
Advice
Why it’s worth doing now in Murthly
Fire stopping is a regular point raised at inspections and handover. Finding unsealed or improvised openings late can hold up a programme. For buildings near Murthly, dealing with all the failing joints at once saves return trips. Photos of each area help us quote the whole job.
The specified product makes a difference, and so does the preparation. Access, phasing and site rules also count.
Why appoint us
- 12-month guarantee on workmanship
- Fixed quotes based on photographs, drawings or a visit
- Constructionline member
- CHAS accredited
Read our cost guide or our accreditations.
General trades versus a specialist
General builders and handymen seal joints, but it isn’t their main trade. A specialist prepares properly, controls joint depth and picks a product with the right movement class, which is what makes a joint last.
Using site staff can make sense for a small touch-up, but anything bigger is another matter: a specialist brings efficiency, a consistent finish and a 12-month guarantee.
Keeping the joints sound
Problems stay small when the joints are checked regularly. Specifically:
- Look above ceilings when tiles are lifted for other jobs
- Keep general-purpose fillers away from compartment walls
- Report damaged or disturbed seals as soon as they’re spotted
- Keep product data and details in the fire safety file
Give the sealant its full cure time before ceilings, boxing or decoration go over it. Some fire-rated sealants accept paint and some don’t.
On fit-outs, get the fire-stopping specification agreed before the services go in. Details can then be picked to suit the actual pipes, cables and ducts.
Penetration seals near Murthly
Scottish guidance (non-domestic Technical Handbook, clause 2.1.14) asks that penetrations match at least the fire resistance period of the element they pass through, with products tested for that end use. We install what’s specified, to the product’s tested detail.
Older community buildings such as United Presbyterian Church that have been rewired or given new heating can have service gaps through walls worth checking against the specification. On a hospital site such as Blairgowrie Community Hospital, 5.8 miles to the north-east of Murthly, fire-rated sealant goes in where the specification calls for it, with the work planned around the estates team’s permits.
Murthly is about 6 miles south-west of Blairgowrie and Rattray, in Perth and Kinross. Across the PH1 postcode area, it works the same way: details in, fixed quote out, then sealing and a 12-month guarantee. Our Perth and Kinross coverage takes in 114 places. Our Dundee page has more on work in that area.
Postcode districts covered here: PH1 for service penetrations. For a building on Macduff Way, Bruce Drive and Kinclaven Road or nearby, we can quote for service penetrations. Sites close to Murthly are covered too, including Gellyburn (1 mile north-west), Caputh (1 mile north-west), Spittalfield (2 miles north), Middleton (2 miles north-west) and West Tofts (3 miles south). Bigger towns within reach include Perth (9 miles south), Blairgowrie and Rattray (6 miles north-east), Letham (9 miles south), Scone (8 miles south), Tulloch (8 miles south) and Alyth (11 miles north-east).
Around Murthly
The nearest railway station is Dunkeld & Birnam station, roughly 4.9 miles north-west. Well-known places in the area include Murthly Castle (2.2 miles north-west) and Blairgowrie Community Hospital (5.8 miles north-east). Open spaces near Murthly include Birnam Hill and Lily Loch.
Murthly: questions and answers
Can you work on a hospital site such as Blairgowrie Community Hospital?
Yes, hospitals are one of the sectors we cover. Each area is agreed with the ward or department and the estates team in advance.
Which Scottish guidance covers penetration seals in Murthly?
Scotland’s non-domestic Technical Handbook covers it in clause 2.1.14: penetrations keep at least the element’s fire resistance duration, with products tested for their end use. Design sits with the designer and the verifier; installation to the tested detail is our part.
Are your applicators CSCS-carded?
Yes. Should the site need card details in advance, tell us and we will confirm them with the quote.
Do you guarantee your work?
Yes. Our workmanship is backed for 12 months.
Are you fully insured?
Yes. We’re fully insured, including public liability cover.
Do you work in Murthly?
Yes. Murthly is in our area and the rest of Perth and Kinross, within our coverage of Greater London, South East England and Scotland. For a quote, give us a call on 01277 525 020 or email drawings and photos.
How do you deal with asbestos in old sealant?
Asbestos is possible in some older mastics, particularly in buildings from before 2000. We check the asbestos register before cutting out old sealant in an older building, and if asbestos is suspected, work stops until it’s tested. We don’t remove asbestos-containing materials.
Commercial clients in Murthly
We take on planned maintenance as well as one-off repairs: working through a building or an estate in stages that fit your budget. Murthly can form part of a wider programme across Perth and Kinross.
If you look after buildings for someone else, you need clear quotes and clear reporting. You get a fixed quote, an agreed scope and a walk round at the end, plus a 12-month guarantee.