Commercial sealant contractors in Murthly, Perth and Kinross
Sealant work for offices, shops, hotels and other commercial buildings in Murthly. CHAS accredited and fully insured, with a 12-month guarantee.
- Earlier reseals applied straight onto the failed bead
- Hardened, chalky sealant on south-facing or exposed elevations
- Damp patches where an external joint has failed
Commercial sealant contractors in Murthly
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Common problems we fix in Murthly
A split down the middle of the bead tells a different story. That typically means the joint stretched further than the product could cope with because the bead was too thin, the joint over-stretched or the movement class wrong. The same product in the same joint tends to fail the same way.
Clients typically get in touch after noticing something like this:
- Layers of sealant, all of them failing
- Gaps behind commercial kitchen worktops and sinks
- Wall and floor joints that have lost their seal
- Hardened, chalky sealant on south-facing or exposed elevations
Premises within reach of Dunkeld & Birnam station (to the north-west of Murthly) often have busy frontages where joints are seen by everyone passing.
Before you book anyone
- Whether old or failed sealant will be cut out, not overlaid
- The terms of the workmanship guarantee
- Their approach to joint depth and backing
- Whether their applicators hold CSCS cards
Commercial sealant contractors for commercial buildings in Murthly
Pricing a commercial reseal is a short process. Our quote form takes photographs, drawings or a schedule of the areas and you can also speak to us on 01277 525 020 or email drawings and photos to talk it through. If the joints need seeing in person, a site visit comes first. Most enquiries involve untidy joints in a reception, shop floor or lobby and layers of sealant, all of them failing, on washrooms and tea points, floor and threshold joints and movement joints in walls and floors. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: in Murthly, that means joint design, primers and backing rod as standard.
Multi-site clients with buildings in and around Murthly can put several sites on one programme, so standards and paperwork match across every site.
Around smaller places such as Murthly, the commercial buildings tend to be hospitality, local shops, schools, health centres and converted rural buildings. Each has kitchens, washrooms and frames that depend on sound joints.
Every job ends the same way: guaranteed. You get a 12-month guarantee on our workmanship, and the quote explains what it covers.
- Place
- Murthly (PH1)
- Wider area
- Perth and Kinross
- Cover
- 12 months on our workmanship
- Price
- A fixed quote before we start
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Commercial sealant contractors around Murthly: what changes locally
Murthly is in the east of Scotland, which is drier than the west. Winter frost and damp frames still stop outside sealing on some days. Outside work is booked with that in mind
For any commercial premises in Murthly, a lasting joint depends on full removal of the old sealant and clean, dry faces.
Murthly is about 6 miles south-west of Blairgowrie and Rattray, in Perth and Kinross. Anywhere in PH1, the process is the same: details in, fixed quote out, then sealing and a 12-month guarantee. Our Perth and Kinross coverage takes in 114 places, from busy centres to rural villages. There’s a separate page for Dundee, about 19 miles away.
Commercial sites across PH1 are covered for sealant joints. Among the streets we cover are Macduff Way, Bruce Drive and Kinclaven Road. Just outside Murthly, we also work in Gellyburn (1 mile north-west), Caputh (1 mile north-west), Spittalfield (2 miles north), Middleton (2 miles north-west) and West Tofts (3 miles south). Nearby towns on our patch include Perth (9 miles south), Blairgowrie and Rattray (6 miles north-east), Letham (9 miles south), Scone (8 miles south), Tulloch (8 miles south) and Alyth (11 miles north-east).
Around Murthly
The closest station to Murthly is Dunkeld & Birnam station, about 4.9 miles north-west. Other landmarks nearby include Murthly Castle (2.2 miles north-west) and Blairgowrie Community Hospital (5.8 miles north-east). For a walk, there’s Birnam Hill and Lily Loch.
FAQs: Murthly
Is Murthly too small for you to travel to?
No. Places such as Murthly are covered as much as the big towns. We work across every Scottish council area. Send photographs and a list of what needs doing, and we’ll plan the job to need as few trips as possible.
Do you offer colour-matched sealant for buildings in Murthly?
Yes. Colour matching to frames, cladding, stone and shop-fit finishes is a regular part of the work. The quote lists the colours the product is made in.
Does the weather affect the work?
For external joints, yes. Sealant needs a dry joint and a temperature within the product’s range, so damp, frosty or very cold days can stop external work. Inside work is seldom held up.
What site paperwork can you provide?
Send your site requirements with the enquiry, and we will confirm the RAMS, insurance and CSCS details with the quote. From you, we’ll need the asbestos information for older buildings and any site rules.
When can the area be used after sealing?
Curing time varies by product, and we confirm it on the day, and flag anything to keep off until it has cured.
Are you CHAS accredited and on Constructionline?
Yes. CHAS accredited, Constructionline member, and our applicators hold CSCS cards.
Is your work guaranteed?
The work is guaranteed for 12 months. Should anything we did fail within that period, let us know.
Other services in Murthly
Leave it or put it right?
A cheaper quote sometimes means the old bead stays in. Sealing over looks tidy at handover, then lifts once the joint starts moving. Our prices always include removal of the failed bead and full joint preparation. Renewing every failing joint on one visit is the sensible approach for a place like Murthly. Send photographs and we’ll quote for everything together.
The product called for affects the cost, as does the preparation each joint needs, from cutting out to priming and backing rod. Access, phasing and site rules also count.
Why appoint us
- Colours confirmed for the specified product
- 12-month guarantee on workmanship
- Clear, fixed quotes
- Fully insured
Read how commercial sealant jobs are priced or our accreditations.
What sets the cost
Before we quote, we look at:
- The site’s rules and procedures
- The product specified
- Removal of failed or old sealant
- Access and working height
The price depends on the quantity of joints, what has to come out first and the access. Call for a quote once you have the details.
Sending details for a quote
Whether it’s one area or a whole building, these details speed things up:
- When you need the work done
- Whether an asbestos survey exists
- What the building is and how it’s used
- Photos of the joints, close up and from further back
A good quote starts with a clear picture: what’s there, how much of it, how we reach it and what’s specified. Send what you have, and we will arrange a site visit if anything is unclear.
How the job changes by surface
Window and door perimeters
Where frames meet the surrounding wall, sealant is the weather line. Failed perimeters are cut out and cleaned, backing goes into deeper gaps, and the joint is resealed with a low-modulus neutral-cure silicone or another suitable product.
Fire-rated seals where specified
Not every penetration suits a sealant. Collars, wraps, batts and boards are specified for other services and gaps, so we’ll flag it if the detail needs a different product.
On site: what to expect
Before any cutting starts, the area is protected: tape along each joint edge and covers over finishes, stock and equipment close by. The work itself normally takes a few hours for one area, or a planned series of visits across a bigger building, and we clear our waste as we work. For a building near Murthly, directions, keys and a contact on the day are worth sorting early. That goes into the plan alongside the quote.
- We start with the evidence: photographs, drawings or a look on site.
- You get a fixed quote covering removal, preparation and the new sealant.
- Sequence, access and working times are settled before the first joint is touched.
- The failed sealant comes out and the faces are prepared, with primer where required.
- Backing goes in, the new sealant is laid and tooled, and the area is left neat.
- Completed areas are signed off with you under our 12-month guarantee.
What we need from you
- Flag any permit to work we will need
- Tell us your opening times and when work is allowed
- Agree which areas must stay open
Get a fixed quote
The quickest route to a quote is a few photographs and the site postcode. Send them through the quote form, or speak to us on 01277 525 020 or send photos by email if you’d rather talk the job through.
Advice
Commercial clients in Murthly
Agents, factors and owners’ representatives all follow the same route: send the details, accept a fixed quote, and we carry out and guarantee the work. Keys, access and contacts can be agreed in advance.
CHAS accredited and a Constructionline member, we are straightforward to vet for your supplier list. Our insurance certificate can be sent along with the quote.