Fire Stopping in Luccombe Village
Fire-rated and intumescent sealing of service penetrations and linear gaps in Luccombe Village. CHAS accredited, Constructionline member, with a 12-month guarantee on workmanship.
- Builders’ foam or ordinary silicone in compartment walls
- Hidden openings found during inspections
- Unsealed openings around new pipes and cables
Fire stopping for Luccombe Village sites
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
General trades versus a specialist
Using site staff can make sense for a small touch-up, but anything bigger is another matter: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
A short, simple internal joint is often within reach of a maintenance team. The usual problems come from preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
Fire stopping in Luccombe Village, done properly
It helps to set out our role at the start. The designer, fire engineer or building control decides which fire stopping is required. What we bring is careful installation of the specified sealant, to the maker’s guidance on buildings around Luccombe Village. If you’re dealing with head-of-wall gaps with no fire seal and fire-rated sealant that has cracked or shrunk back, we can help, on small duct penetrations where the tested detail allows, cable penetrations and service gaps in risers alike. A single leaking joint is often how a building in Luccombe Village first comes to us: we look at the rest while we are there and tell you what we find.
For a smaller site near Luccombe Village, we plan to do all the penetrations in one go, with the specification and photos sent in advance. Design and sign-off belong to the designer or building control; we install what’s specified.
Our 12-month guarantee is about workmanship, not wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we’re clear about what is covered before work starts.
- Place
- Luccombe Village (PO37)
- Wider area
- Isle of Wight
- Guarantee
- A 12-month guarantee
- Quote
- Quoted before any work starts
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
Towns and villages near Luccombe Village
What else we do in Luccombe Village
Your questions answered
Do you seal service penetrations in hotels around Luccombe Village?
Yes, to the specification and the product’s tested detail. Each seal follows the tested detail, and rooms are done in turn.
Is Luccombe Village off your patch?
No. Small places get the same service as large ones. We work across Greater London and the South East. We plan jobs in smaller places so return trips are kept to a minimum.
Is your workmanship covered by a guarantee?
Yes, for 12 months. If our installation fails in that time, we return and fix it.
Can the building stay open while you work?
Normally, yes. Phased work can be planned so areas stay in use, with each area protected and signed.
Can one quote cover more than one building?
Yes. A group of buildings can go on one quote, with one point of contact across South East England, Greater London and Scotland.
What’s the quickest route to a quote?
It works in four steps: send details, receive a fixed quote, we carry out the work, and it’s guaranteed. The first step only needs photos and a postcode.
How much does the work cost?
It depends on the job: the volume of work, the access, the specified product and how it’s phased. Call for a quote and we’ll price it properly.
Where services cross fire walls in Luccombe Village
Approved Document B is the English guidance that covers fire stopping around openings and penetrations. The national BS 476 classes are due to drop out of it from 2 September 2029, leaving the European BS EN 13501-2 route, subject to transitional arrangements. What we install is set by the specification, and it goes in to the tested detail. A 2-mile radius around Luccombe Village takes in a good number of hotels. In hotels, bedroom and corridor walls are typically fire-resisting, so services added in a refit need sealing with the specified product.
At a college such as St Catherine's College, which lies south-west of Luccombe Village, checking penetration seals after summer M&E works is good practice. For a building such as St Blasius Church, new heating or data runs are the usual reason penetrations need sealing. Hotels such as Bourne Hall Country House Hotel (less than half a mile north of Luccombe Village) rely on fire-resisting walls between bedrooms and corridors, and refits that add services leave penetrations to seal where fire-rated sealant is specified.
Luccombe Village is about 7 miles south of Ryde, in the Isle of Wight. If you’re looking for fire stopping in Luccombe Village, we can help. We work across 125 places in the Isle of Wight, large and small. Sites around Portsmouth have their own page, roughly 14 miles from Luccombe Village.
Postcode districts covered here: PO37. Streets here include The Highway, Maythorne Way and Ash Grove. Sites close to Luccombe Village are covered too, including Shanklin (1 mile north), Lake (2 miles north), Sandown (3 miles north), Queen's Bower (3 miles north) and Skinner's Hill (3 miles north). A short drive away, we cover Newport (8 miles north-west), Ryde (7 miles north), Cowes (11 miles north-west), East Cowes (11 miles north-west), Oakfield (7 miles north) and Barton (8 miles north-west). Remote and island addresses take more planning, from travel and ferries to the weather, so give the site location in your enquiry.
Local landmarks in Luccombe Village
In Luccombe Village, that means premises near King Harry's Bar and the streets around them. The nearest railway station is Shanklin station, roughly 1.2 miles north. Other landmarks nearby include Sandown Castle (3.1 miles north-east) and Rylstone Manor (0.7 miles north). Green spaces nearby include Alverstone Mead and St Boniface Down.
Looking after the joints
Cleaning and maintenance staff play a part too. Share these points with them:
- Check with the data sheet before painting over fire sealant
- Keep general-purpose fillers away from compartment walls
- Keep product data and details in the fire safety file
- Ask the designer to confirm details early on refits
Give the sealant its full cure time before ceilings, boxing or decoration go over it. Not every fire-rated product can be painted.
Specify fire stopping early on refits, not as an afterthought. Details can then be picked to suit the actual pipes, cables and ducts, and the work runs in step with the M&E.
Why act early in Luccombe Village
An unsealed opening affects more than fire safety: they also carry noise, draughts and smells between rooms. Sealing them to the specified detail deals with the fire risk first, and the other benefits follow. Halls, stores and units around places like Luccombe Village may not be checked every day, so a failed joint can leak for a while before anyone sees it. Renewing joints in good time avoids the problem.
A quote for service penetrations depends on quantities, condition and access. Ask us for a fixed quote.
Why appoint us
- Our applicators hold CSCS cards
- Constructionline member
- 12-month guarantee on workmanship
- Products installed to the manufacturer’s instructions
See our cost guide and how we’re accredited.
Our process
Occupied buildings need a little choreography. We sign and contain the area we’re in, keep walkways clear and move on in phases so staff and visitors can carry on around us. Jobs in and around smaller places like Luccombe Village are normally planned as a single visit, so we ask for photos and rough sizes first. That way the right products come on the day.
- We read the specification, drawings or penetration schedule you send and raise any questions before we price.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- Mineral wool or other backing goes in wherever the detail asks.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- If an opening needs something other than sealant, we tell you instead of improvising.
What we need from you
- Let us know about inductions and permits
- Point out parking and an unloading spot
- Clear stock, furniture or equipment away from the joints
Getting a fixed quote
We quote a fixed sum against the scope you give us, so you know the figure before anyone is on site. To ask for one, give us a call on 01277 525 020 or email us.
Advice
When something else is needed
A few problems need another trade or a different fix, and we say so rather than covering them up:
- Designing or specifying fire stopping, which sits with the designer or fire engineer
- Plastic pipes whose detail calls for a collar or wrap
- Approving the work on behalf of building control
If you’re not sure, just give us a call on 01277 525 020 or email us and we’ll give you a straight answer.
Where we work in Luccombe Village
- Pipe penetrations
- Service gaps in risers
- Joints between fire-resisting walls and floors
- Small duct penetrations where the tested detail allows
- Cable penetrations
- Linear gaps at wall heads
Cost factors for service penetrations
Before we quote, we look at:
- Backing rod, priming and other preparation
- Removal of failed or old sealant
- Access and working height
- Site requirements such as inductions and permits
There’s no price list, because the scope varies so much from one building to the next. Call for a quote and we will price your job on its own details.
Before you send an enquiry
For an accurate fixed quote, we need a clear picture of the site. Send us:
- When you need the work done
- Drawings or a marked-up plan, if available
- Specification clauses that apply
- Clear photographs of the problem areas
Let us know the site, the scope and your timescale, and we’ll put a fixed quote together. The easiest way is to phone 01277 525 020 or email a schedule or drawings.