Lochore fire stopping
Our CSCS-carded applicators take on fire-rated and intumescent sealing of service penetrations and linear gaps in Lochore. Send details for a fixed quote.
- Expanding foam used as fire stopping
- Seals that don’t match their tested detail
- Hidden openings found during inspections
Fire stopping for businesses in Lochore
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
About our fire stopping in Lochore
Every service that crosses a compartment wall or floor leaves an opening, and that opening needs sealing to hold back fire and smoke. Our part is installing fire-rated and intumescent sealant at those openings and along linear gaps, where the specification calls for it. We work to the product’s tested detail for every seal. If you are dealing with openings found when ceilings come down for a refit and service penetrations left open after M&E works, we can put it right, whatever the surface. Most enquiries from Lochore start with one failed joint and grow into a wider look at the building: we look at the rest while we are there and tell you what we find.
Hotels and care homes around smaller places like Lochore often have services added during refurbishment. A round of checks after M&E work is good practice, and any gaps found are sealed where fire-rated sealant is specified.
We stand behind the joints we seal: 12 months, guaranteed. That covers our preparation and application.
- Where
- Lochore (KY5)
- Wider area
- Fife
- Cover
- 12 months on every job
- Quote
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Page updated
- 3 November 2026
Common problems we fix in Lochore
Some service penetrations were never sealed at all because they sat out of sight above a ceiling or inside a riser. Inspections, refurbishments and ceiling access usually bring them to light.
Any of the following is a good reason to get the joints checked over:
- Open linear gaps along the top of fire-resisting walls
- Openings found when ceilings come down for a refit
- Unsealed openings around new pipes and cables
- Fire-stopping items raised at inspection or handover
In a school such as Lochgelly High School, fire-rated sealant goes in around service penetrations where it is specified.
Questions to ask before you book
- Who will actually carry out the work
- How joint depth will be controlled
- Whether primer will be used where the manufacturer specifies it
- Which product they’ll use, and why it suits the joint
Nearby places to Lochore
Other services in Lochore
General trades versus a specialist
For a quick touch-up, site staff may be fine, but anything bigger is another matter: a specialist brings efficiency, a consistent finish and a 12-month guarantee.
There’s also the paperwork. Many sites expect CSCS cards, RAMS and proof of insurance, and we’ll confirm the paperwork you need with the quote.
Owners, agents and contractors
We take on planned maintenance as well as one-off repairs: resealing failed joints building by building, on a schedule that suits your budget. Sites in Lochore can sit alongside others in a wider programme across Fife.
As a CHAS accredited contractor and Constructionline member, we’re straightforward to vet for your supplier list. We’re fully insured, and our insurance certificate can go with the quote.
Your questions answered
Is a smaller place like Lochore outside your area?
Not at all. Lochore is within our area. Our area covers all of Scotland, cities, towns and islands alike. Send photos and a list of what needs doing, and we will plan the job to need as few trips as possible.
How do Scotland’s building standards affect fire-rated sealant in Lochore?
Scotland’s non-domestic Technical Handbook covers it in clause 2.1.14: penetrations keep at least the element’s fire resistance duration, with products tested for their end use. The detail is set by the designer and goes through the warrant process; we install the specified product to its tested detail.
When can you be on site?
Mention the site’s hours and access windows in your enquiry, and we’ll schedule the work to suit. You can reach the office between 8am and 5pm, Monday to Friday.
Do your applicators hold CSCS cards?
Yes. Should the site need card details in advance, let us know and we’ll send them with the quote.
Can you handle several sites?
Yes. A group of buildings can go on one quote, with one point of contact across South East England, Greater London and Scotland.
Can you work to our specification?
Yes. We follow the specification, along with the manufacturer’s installation guidance, and any queries are raised before we start.
When is resealing likely to be due?
Nobody can honestly give a figure in years, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular inspection is the best way to catch problems early.
Quoting for work in Lochore
Each job is priced on its own details. The things that drive the figure:
- Removal of failed or old sealant
- Working within restricted access windows
- Backing rod, priming and other preparation
- How accessible the joints are
Access often affects the price as much as the sealing: easy-to-reach joints are quicker than those that need equipment to get to. Tell us how the joints are reached and call for a quote.
Sending details for a quote
A few photos plus some basic facts will normally do. It helps to include:
- Where the site is, with the postcode
- Anything awkward about access or site hours
- What the building is and how it’s used
- Photos of the joints, close up and from further back
We quote a fixed sum against the scope you give us, so you know the figure before anyone is on site. To start the process, call the office on 01277 525 020 or use the quote form.
Penetration seals near Lochore
In Scotland, clause 2.1.14 of the non-domestic Technical Handbook expects service penetrations to keep at least the fire resistance duration of the wall or floor, with proprietary products, intumescent ones included, tested for their end use. Where fire-rated sealant is specified, that’s what we install, to the tested detail.
Older community buildings such as Ballingry Parish Church that have been rewired or given new heating can have service gaps through walls worth checking against the specification. Office fit-outs on sites such as Crosshill Business Centre, under half a mile to the south of Lochore, add cabling and pipework through fire-resisting walls, and fire-rated sealant goes in where the specification calls for it.
Lochore is about 6 miles south-west of Glenrothes, in Fife. Anywhere in KY5, it works the same way: send details, get a fixed quote, we seal, and the work is guaranteed. Lochore is one of 132 places in Fife on our list for service penetrations. There’s a separate page for Edinburgh, about 15 miles away.
We take on service penetrations across the KY5 postcode area, whatever the building. If your site is on Scott Place, Loch Leven Terrace and Marmion Road or close by, send details and we will quote for service penetrations. We also cover Crosshill (1 mile south), Ballingry (1 mile north), Glencraig (1 mile south), Lochgelly (2 miles south) and Lumphinnans (3 miles south). A short drive away, we cover Dunfermline (7 miles south-west), Kirkcaldy (6 miles east), Glenrothes (6 miles north-east), Leven (13 miles east), Cowdenbeath (4 miles south) and Dysart (8 miles east).
Local landmarks in Lochore
The nearest railway station is Lochgelly station, roughly 1.6 miles south. Well-known places in the area include Lochore Castle (0.6 miles south) and Michael Bruce Cottage Museum (3.9 miles north). Open spaces near Lochore include Loch Gelly and Benarty Hill.
Different surfaces, different methods
Drylining partitions
Holes in board are often cut larger than needed. If the gap exceeds the tested range, sealant alone won’t do.
Small ducts
We seal around ducts only within what the tested detail covers. Dampers and ductwork systems themselves are outside our work.
Our process
Where the site stays busy, the work is phased so only one area is out of use at a time. Each area is protected, prepared and sealed before we move to the next. For work around Lochore, we aim for one trip, which is why we ask for photos and a full list first. External joints need a dry spell as well.
- First we go through the drawings, schedule or specification for the seals and raise any questions before we price.
- On site, each opening is checked against the tested detail it is meant to follow.
- Unsuitable fillers and loose debris are taken out of each opening.
- Mineral wool or other backing goes in wherever the detail asks.
- We apply the specified sealant to the depth and around the services as the detail shows.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
Getting the site ready
- Explain the parking and delivery arrangements
- Let building users know which areas are affected
- Share the asbestos register for older buildings
Request a quote
Send us photos, drawings or a joint schedule are often enough for a fixed quote. If the job needs a look first, we’ll arrange a site visit.