Fire stopping in Glenrothes
Fire-rated and intumescent sealing of service penetrations and linear gaps throughout Glenrothes and nearby, by CSCS-carded applicators. CHAS accredited and fully insured.
- Old intumescent sealant that has split away
- Penetration schedules that need working through
- Non-fire-rated filler around services
Fire stopping for businesses in Glenrothes
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Fire stopping in Glenrothes
The test standards are BS EN 1366-3 for penetration seals and BS EN 1366-4 for linear joints, with results classified under BS EN 13501-2. That classification, such as EI 60 or EI 120, belongs to the product in its tested arrangement. So our job is to reproduce that arrangement faithfully. We work on joints between fire-resisting walls and floors, cable penetrations and small duct penetrations where the tested detail allows, and the usual reasons a site gets in touch are service penetrations left open after M&E works and builders’ foam or ordinary silicone in compartment walls. Whoever orders the work in Glenrothes, the brief is usually the same: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
Fire-rated sealing in Glenrothes follows the specification set by the designer: the designer, fire engineer or verifier sets and accepts the detail, and our applicators install it. Records of the work can be discussed when we quote.
Every job is signed off with a 12-month guarantee. It’s a plain promise: if the work we did fails within twelve months, we return to fix it.
Our process
Tell us your site hours and access windows and we’ll plan around them. While we are working, the area stays contained and tidy, and your contact hears from us before we move to the next area. Jobs in Glenrothes are planned with two things in mind: the forecast for external joints and the building’s hours for internal ones. Photos or drawings let us give a fixed quote and a realistic plan.
- First we confirm the product and tested details named in the specification.
- Openings are measured and grouped by detail.
- Improvised fillers and failed sealant are removed.
- Where the detail needs backing, it goes in at the stated depth.
- We gun the sealant in to the specified depth around each service and tool it.
- Completed areas are checked with you, with the records agreed when we quoted.
Getting the site ready
- Send asbestos survey details if the building is pre-2000
- Tell us which areas need to stay in use
- Explain the parking and delivery arrangements
Ask for a quote
Tell us about the building, the joints and when you need the work done, and a fixed quote will follow. To get it moving, phone 01277 525 020 or email a schedule or drawings.
Related advice
Work for main contractors and building owners
As a CHAS accredited contractor and Constructionline member, we are straightforward to vet for your supplier list. Our insurance certificate can be sent along with the quote.
If you look after buildings for someone else, you need clear quotes and clear reporting. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative, plus a 12-month guarantee.
What we’re called out for in Glenrothes
Damage plays a part too. Seals get knocked during maintenance, cut back to add a cable or pulled out when services are swapped, and the repair is often skipped.
What tends to prompt an enquiry:
- Seals that don’t match their tested detail
- Expanding foam used as fire stopping
- Fire sealant pulled out of the opening
- Fire-stopping items raised at inspection or handover
For a hotel such as Golden Acorn Hotel, less than half a mile east of Glenrothes, penetration seals are worth checking after any refit or services upgrade.
Before you book anyone
- Which product they’ll use, and why it suits the joint
- Health and safety accreditation such as CHAS
- Will RAMS and insurance details be available?
- Who will actually carry out the work
Fire stopping around Glenrothes: what changes locally
A 2-mile radius around Glenrothes takes in plenty of hotels. In hotels, bedroom and corridor walls are typically fire-resisting, so services added in a refit need sealing with the specified product. Under the Scottish non-domestic Technical Handbook, clause 2.1.14, penetrations should be fire stopped to at least the wall or floor’s fire resistance duration, and products should be tested for their end use. We install fire-rated sealant to that tested detail where it is specified.
Large healthcare estates like Glenrothes Hospital (0.8 miles north-west of Glenrothes) change their services often, so penetration seals are worth checking after M&E work. For a unit at a centre such as Kingdom Shopping Centre (under half a mile north of Glenrothes), penetration seals are worth checking after each shop fit.
Glenrothes is about 17 miles north of Edinburgh, in Fife. Anywhere in KY7, it works the same way: send details, get a fixed quote, we seal, and the work is guaranteed. Our Fife coverage takes in 132 places, from busy centres to rural villages. Our Edinburgh page has more on work in that area.
If you need fire stopping in KY7, KY6, KY1 and KY5, the process matches everywhere else we work: send details, get a quote, we seal, guaranteed. For a building on Cadham Square, Shuna Square and Eriskay Square or nearby, send details and we’ll quote for service penetrations. With the A92 and A911 nearby, Glenrothes is straightforward for us to reach. Just outside Glenrothes, we also work in Coaltown of Balgonie (2 miles east), Strathore (2 miles south), Thornton (2 miles south-east), Kirkcaldy (5 miles south) and Dysart (5 miles south). A short drive away, we cover Dunfermline (13 miles south-west), Leven (7 miles east), Cowdenbeath (9 miles south-west), Dalgety Bay (13 miles south-west), Cupar (10 miles north-east) and Rosyth (15 miles south-west). Among the larger centres in Fife is Glenrothes, and we take on service penetrations for its commercial and public buildings.
Landmarks near Glenrothes
In Glenrothes, that means premises near The Golden Acorn pub and Riverside Park, among other places. The nearest railway station is Markinch station, roughly 1.7 miles east. Other landmarks nearby include Glenrothes Hospital (0.7 miles north-west) and Balgonie Castle (2.4 miles east). Open spaces near Glenrothes include East Lomond.
Quoting for work in Glenrothes
Before we quote, we look at:
- The size and state of each joint
- How much there is to seal
- Specialist products, such as fire-rated or hygienic sealants
- Removal of failed or old sealant
We don’t publish prices, since every building and every scope is different. Call for a quote.
Sending details for a quote
However big the job, these details speed things up:
- When you need the work done
- The product your specification calls for
- The postcode of the building
- Whether an asbestos survey exists
A handful of photographs and a postcode is the fastest way to a quote. Upload them with the quote form, or speak to us on 01277 525 020 or email a schedule or drawings if you’d rather talk the job through.
Should maintenance staff do it?
What you see is the finished bead, but most of the work is hidden. Backing rod, primer where specified and a joint designed to move with the building are where general trades tend to cut corners.
General builders and handymen seal joints, but it isn’t their main trade. A specialist prepares properly, controls joint depth and picks a product with the right movement class.
FAQs: Glenrothes
Can work at a site such as Fife College - Auchmuty Learning Centre fit around teaching?
Yes. Education sites typically want the work in vacations or in phases during term, and we plan to suit. Let us know which documents your site asks for, and we’ll confirm them alongside the quote.
Do you seal service penetrations in hotels around Glenrothes?
Yes, where fire-rated sealant is the specified product. Each seal follows the tested detail, and rooms are done in turn.
Can the building stay open while you work?
Yes, as long as we plan it. We agree a sequence with your contact so just one area at a time is disrupted.
Do you work to architects’ specifications?
Yes. Include it with the drawings when you ask for a quote, and the quote will be based on it.
How long does a job like this take?
It depends on the scope, but the work typically takes longer where risers, ceiling voids or occupied floors have to be worked through in sequence. For bigger or phased jobs, we will set out a timescale with the quote.
Are you insured?
Yes. We’re fully insured, and the certificate can go with your quote.
How soon can the area be used again?
That comes down to the sealant and the temperature. Some take light use quickly, others need longer to cure, and we confirm it before leaving site.
What else we do in Glenrothes
Different surfaces, different methods
Small ducts
Ducts are only sealed with sealant where the detail allows it. Dampers and ductwork systems themselves are outside our work.
Masonry and concrete
Core-drilled holes are neat; broken-out ones rarely are. The gap is measured at the widest point against the detail’s limits, and any outside it are raised with you.