Kinmundy fire stopping
Commercial sealant work in Kinmundy for contractors, FMs and building owners: fire-rated and intumescent sealing of service penetrations and linear gaps, with a fixed quote first.
- Fire sealant pulled out of the opening
- Seals disturbed by maintenance and left open
- Non-fire-rated filler around services
Fire stopping for businesses in Kinmundy
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
What we can’t put right
Not every problem is a sealant problem, and we are upfront when that’s the case. These need a different solution:
- Gaps in walls that were never built as compartment walls
- Large openings beyond what any sealant detail covers
- Reviewing a building’s overall fire safety
If you’re not sure, just phone 01277 525 020 or email drawings and photos and we’ll give you a straight answer.
Joints and surfaces we work on
- Service gaps in risers
- Linear gaps at wall heads
- Pipe penetrations
- Cable penetrations
- Small duct penetrations where the tested detail allows
- Joints between fire-resisting walls and floors
About our fire stopping in Kinmundy
A fire-rated sealant is only one part of a tested system: its test evidence covers one product in one kind of wall or floor, with set services, gaps, depths and backing. Before we seal anything, we check the opening against the detail it is meant to follow, and we say so if it doesn’t fit. The enquiries we see most involve non-fire-rated filler around services and unsealed openings around new pipes and cables, across service gaps in risers, cable penetrations and pipe penetrations. Most enquiries from Kinmundy start with one failed joint and grow into a wider look at the building: we look at the rest while we’re there and tell you what we find.
Hotels and care homes around smaller places like Kinmundy often have services added during refurbishment. We fit the specified fire-rated sealant as its published detail shows and raise it if another product is needed.
Work we carry out comes with a 12-month guarantee. Should something we installed fail, speak to us on 01277 525 020 or email drawings and photos and we’ll come back to it.
- Location
- Kinmundy (AB21)
- Wider area
- Aberdeenshire
- Guarantee
- A 12-month guarantee
- Quotes
- Quoted before any work starts
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Why act early in Kinmundy
Sealing behind the M&E trades area by area beats a sweep at the end. Openings are visible, access is open and nothing has to be taken down and each detail can be checked as we go. Exposed buildings in Scotland take a lot of weather, so it’s worth renewing joints around Kinmundy before they leak.
Small jobs and large programmes are priced from the same things: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote and we will put a fixed figure on it.
Why appoint us
- Over 20 years of commercial sealing
- Public liability insurance in place
- CHAS accredited contractor
- CSCS-carded applicators
Common problems we fix in Kinmundy
Some seals fail because the wrong product went in: expanding foam or a general-purpose sealant pushed into a gap to tidy it. The opening looks sealed but has no fire test evidence behind it and has to be removed.
What tends to prompt an enquiry:
- Seals that don’t match their tested detail
- Openings found when ceilings come down for a refit
- Open linear gaps along the top of fire-resisting walls
- Fire seals cut back for extra cables and never reinstated
Hotels like Newmachar Hotel (to the north of Kinmundy) are refurbished in phases, and each phase can open up compartment walls.
What your quote should include
- Which product they’ll use, and why it suits the joint
- Their pre-qualification and accreditations
- Do they follow the manufacturer’s priming guidance?
- How they handle RAMS and site documents
From enquiry to sign-off
Occupied buildings need a little choreography. We sign and contain the area we’re in, keep walkways clear and work section by section so the rest of the building stays in use. Tell us who will meet us and how to get in at your building near Kinmundy. That goes into the plan alongside the quote.
- We read the specification, drawings or penetration schedule you send and ask about anything unclear.
- On site, each opening is checked against the tested detail it is meant to follow.
- Unsuitable fillers and loose debris are taken out of each opening.
- Mineral wool or other backing goes in wherever the detail asks.
- We apply the specified sealant to the depth and around the services as the detail shows.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
What we need from you
- Let building users know which areas are affected
- Flag any permit to work we’ll need
- Send any specification or drawings in advance
Ask for a quote
To get a fixed quote, speak to us on 01277 525 020 or email the details over, telling us the site location and the nature of the job. You can also send details through our quote form.
Read more
Common questions from Kinmundy clients
How do the Scottish rules apply to fire-rated sealing in Kinmundy?
Scotland’s non-domestic Technical Handbook covers it in clause 2.1.14: penetrations keep at least the element’s fire resistance duration, with products tested for their end use. We install what has been specified, to the manufacturer’s tested detail, while design and approval sit with the designer and the verifier.
Do you cover business parks and estates near Kinmundy, such as Bridgehaugh Industrial Estate?
Yes. Our area takes in Kinmundy and its surroundings, with estates and business parks such as Bridgehaugh Industrial Estate included. Photos and a short description are enough for a first look.
Do you take on multi-site work?
Yes. A group of buildings can go on one quote, and you deal with one contact throughout.
How long before the joints can be used?
Curing time varies by product, and we confirm it on the day.
Do you cover Kinmundy?
Yes. Sites across Kinmundy are covered.
Do your applicators hold CSCS cards?
Yes. Should the site need card details in advance, tell us and we’ll confirm them with the quote.
Do you offer coloured sealant?
In many cases, yes. Sealants are made in a wide range of standard colours, and matching to RAL references or nearby finishes is commonly requested. We’ll confirm the colours available for the specified product.
More services for Kinmundy
Quoting for work in Kinmundy
To price the job, we consider:
- Whether the work must be split into stages
- How accessible the joints are
- Distance, for remote addresses
- The site’s rules and procedures
The price depends on how many linear metres there are, what has to come out first and how the joints are reached. Call for a quote when you are ready.
Sending details for a quote
The more we know, the firmer the quote. Helpful details to send:
- Approximate linear metres or a joint schedule
- The asbestos register, for older buildings
- Clear photos of the problem areas
- Whether the building will be occupied during the work
Send us photographs, drawings or a joint schedule are often enough for a fixed quote. If the job needs a look first, we will arrange a site visit.
Compartments and services around Kinmundy
Scotland has its own building standards: the non-domestic Technical Handbook (clause 2.1.14) says service penetrations should be fire stopped to at least the fire resistance duration of the wall or floor, with proprietary products, intumescent ones included, tested for their end use. Our part is installing the specified fire-rated sealant to its tested detail.
Older community buildings such as Newmachar Church that have been rewired or given new heating can have service gaps through walls worth checking against the specification. For a unit at a site such as Bridgehaugh Industrial Estate, which lies south of Kinmundy, new power or data runs between office and warehouse can breach a compartment wall.
Kinmundy is about 7 miles north of Aberdeen, in Aberdeenshire. Across the AB21 postcode area, it works the same way: send details, get a fixed quote, we seal, and the work is guaranteed. Kinmundy is one of 179 places in Aberdeenshire on our list. Sites around Aberdeen have their own page, about 7 miles away.
Business premises anywhere in AB21 are within our area for service penetrations. Nearby places we also cover include Newmachar (1 mile north), Kingseat (1 mile north-east), Whitecairns (2 miles east), Corsehill (2 miles south-east) and Hatton of Fintray (3 miles west). A short drive away, we cover Inverurie (8 miles west), Westhill (8 miles south-west), Ellon (9 miles north-east), Portlethen (13 miles south), Garioch (7 miles west) and Kemnay (10 miles west).
Around Kinmundy
The nearest railway station is Dyce station, roughly 3.3 miles south of the centre. Other landmarks nearby include Kingseat Hospital (1.3 miles north-east). For a walk, there’s Corby Loch and Temple Hill.
Site staff or a sealant specialist?
Some joints are best left to specialists: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. A poor seal in places like these tends to cost more to put right later.
Putting right a botched joint often costs more than sealing it well at the start, since all of it has to come out and the faces be cleaned back again. That’s why many clients bring in a specialist from the beginning.