Fire Stopping in Kinghorn
Planning work on a service penetration in Kinghorn? We assess it, carry out the work and guarantee our workmanship for 12 months.
- Service penetrations left open after M&E works
- Open linear gaps along the top of fire-resisting walls
- Improvised or mixed-product fire seals
Fire stopping near Kinghorn
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
FAQs: Kinghorn
Will you plan work around the academic year at somewhere like University of Dundee - Fife Campus?
Yes, holiday working periods are the norm on campus jobs. Tell us which site documents you need, such as RAMS, our insurance certificate or CSCS details, and they’re confirmed with the quote.
Can you seal around new services in a hotel near Kinghorn?
Yes. We install fire-rated and intumescent sealant where it is specified. Each seal follows the tested detail, and rooms are done in turn.
What do you charge?
There isn’t a price list, because every site is different. Send photographs or drawings and we’ll price it at a fixed figure.
Can one quote cover more than one building?
Yes. We take on portfolio and planned maintenance work, with each site phased to suit its occupants.
Do you have public liability insurance?
Yes. Mastic Doctor is fully insured, public liability included.
How long does a typical visit take?
It depends on the scope, though a typical visit usually takes longer where risers, ceiling voids or occupied floors have to be worked through in sequence. For bigger or phased jobs, we’ll set out a timescale with the quote.
Which sealant will you use?
If the job is specified, we follow the specification. If not, we choose for the movement, the surfaces and the conditions, in line with the manufacturer’s guidance.
Fire stopping for commercial buildings in Kinghorn
A fire-rated sealant is only one part of a tested system: the evidence covers a specific product, wall or floor type, service, gap, depth and backing. We match each opening to that detail before any sealant goes in. We work on service gaps in risers, cable penetrations and small duct penetrations where the tested detail allows, and the usual reasons a site gets in touch are seals that don’t match their tested detail and openings found when ceilings come down for a refit. Whether you call it commercial sealant work, mastic application or joint sealing, the work in Kinghorn is the same: failed joints cut out, faces prepared and the right sealant laid to the right depth.
Around smaller places such as Kinghorn, compartment walls and floors tend to be in schools, hotels, care homes and community buildings. Those penetrations are closed with the product the specification names, built up as tested.
We sign every job off with a 12-month guarantee. It’s a plain promise: if our work fails within that year, we put it right.
- Where
- Kinghorn (KY3)
- Region
- Fife
- Cover
- 12 months on every job
- Quotes
- Quoted before any work starts
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
Why deal with it now?
Inspections and handover checks often pick up fire stopping. Finding unsealed or improvised openings late can hold up a programme. Around smaller places like Kinghorn, halls, stores and seasonal buildings may not be checked often, so a failed joint has time to cause damage. Resealing early avoids that.
Larger quantities, tricky access or phasing all shape the price. So do site requirements such as inductions and permits.
Why clients in Kinghorn choose us
- 12-month guarantee on workmanship
- CHAS accredited
- Commercial sealant work since 2005
- Public liability insurance in place
Take a look at our cost guide or how we’re accredited.
Also near Kinghorn
Also in Kinghorn
Do you need fire stopping in Kinghorn?
Physical damage is another reason seals stop doing their job. Seals get knocked during maintenance, cut back to add a cable or pulled out when services are swapped, and the repair is often skipped.
Site and facilities staff are often the first to spot these:
- Service penetrations left open after M&E works
- Seals that don’t match their tested detail
- Builders’ foam or ordinary silicone in compartment walls
- Unsealed joints where partitions meet the slab
Tenant changes at centres like The Mercat Shopping Centre (to the north of Kinghorn) often mean new services through walls between units.
Questions to ask before you book
- Are they CHAS accredited or on Constructionline?
- Proof of insurance
- Who will actually carry out the work
- Is the sealant right for the movement and the substrate?
Compartment walls and floors in Kinghorn
Kinghorn has several hotels close by, all within 2 miles. A hotel refit often runs new services through compartment walls between bedrooms and corridors, and each opening needs the specified seal. In Scotland, clause 2.1.14 of the non-domestic Technical Handbook expects service penetrations to keep at least the fire resistance duration of the wall or floor, using products tested for the way they’re used. We install what’s specified, to the product’s tested detail.
Industrial units on estates such as Meadowfield Industrial Estate, 2.2 miles west of Kinghorn, often separate offices from warehouse space with fire-resisting walls, and new services through them need the specified seal. For a hospital such as Victoria Hospital, 3.8 miles north of Kinghorn, penetration sealing is normally phased ward by ward, with infection-control rules agreed first.
Kinghorn is about 4 miles south of Kirkcaldy, in Fife. Commercial clients in Kinghorn use us for work on service penetrations. We work across 132 places in Fife, from busy centres to rural villages. Sites around Edinburgh have their own page, about 9 miles away.
Business premises anywhere in KY3 are within our area. We cover commercial and managed buildings on High Street, Glamis Road and St Leonard's Place and the roads nearby. Kinghorn sits on or close to the A921 and B923. Sites close to Kinghorn are covered too, including Burntisland (2 miles west), Pathhead (4 miles north), Newbigging (4 miles north-west), Kirkcaldy (4 miles north) and Auchtertool (4 miles north-west). A short drive away, we cover Dunfermline (10 miles west), Glenrothes (9 miles north), Leven (11 miles north-east), Cowdenbeath (7 miles west), Dalgety Bay (7 miles west) and Rosyth (10 miles west).
What’s near Kinghorn
There’s a railway station in Kinghorn itself: Kinghorn station. Other landmarks nearby include The Mercat Shopping Centre (2.8 miles north) and Museum of Communication (2.4 miles west). Green spaces nearby include Kinghorn Loch.
Commercial clients in Kinghorn
CHAS accredited and a Constructionline member, we’re straightforward to vet for your supplier list. We’re fully insured, and our insurance certificate can go with the quote.
Main contractors use us as their sealant subcontractor, on new build and refurbishment alike. Programme, specification and site rules come first, and our applicators hold CSCS cards.
Cost factors for service penetrations
A fixed quote reflects the actual work. It takes account of:
- Induction, permit and paperwork requirements
- The size and state of each joint
- Whether the work must be split into stages
- Any access equipment needed
Every site prices differently: the joint sizes, the specified product, access and working hours each have a bearing. A fixed quote follows once we understand the job.
Details that help us quote
There’s no need for a formal survey. These details are enough to start:
- A wide shot and a close-up of the area
- The type of building and who uses it
- Specification clauses that apply
- Rough lengths or quantities, or drawings if you have them
Send details, get a quote, we seal, guaranteed: that’s how every job runs. The first step is to call the office on 01277 525 020 or send details through our quote form with what you know.
Diagnose, treat, sign off
We bring the products specified for the job, along with primers and backing rod. Joint faces are cleaned back to sound, dry surfaces, primer goes on where the manufacturer specifies it, and each bead is tooled to a neat concave finish. For a building near Kinghorn, directions, keys and a contact on the day are worth sorting early. We’ll confirm the plan with the fixed quote.
- We read the specification, drawings or penetration schedule you send.
- On site, each opening is checked against the tested detail it is meant to follow.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- Mineral wool or other backing goes in wherever the detail asks.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- If an opening needs something other than sealant, we tell you instead of improvising.
What we need from you
- Send any specification or drawings in advance
- Agree which areas must stay open
- Tell us your opening times and when work is allowed
Get a fixed quote
Tell us about the building, the joints and when you need the work done, and we will put a fixed quote together. To get it moving, speak to us on 01277 525 020 or send photos by email.
Advice
What sealant work can’t fix
We check first that sealant really is the fix. It won’t put right:
- Issuing fire ratings or certificates for seals
- Designing or specifying fire stopping, which sits with the designer or fire engineer
- Fire doors, dampers or other fire safety equipment
If in doubt, call 01277 525 020 or email drawings and photos and we’ll say what we think before you book.
Surfaces we seal
- Linear gaps at wall heads
- Joints between fire-resisting walls and floors
- Service gaps in risers
- Pipe penetrations
- Cable penetrations
- Small duct penetrations where the tested detail allows