Coloured Sealant in Kent Street
Coloured and colour-matched sealant for visible joints in Kent Street and across Kent. CHAS accredited, Constructionline member, with a 12-month guarantee on workmanship.
- A bead that fights the cladding or frame colour
- Fit-outs with a sealant colour in the specification
- Joints that need to match a new RAL frame colour
Need coloured sealant in Kent Street?
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Coloured sealant in Kent Street, done properly
Matching to anodised or powder-coated frames is a common request. We compare the RAL reference with the colours made for the specified sealant, and the nearest option is agreed with you. If the range has no close colour, a paintable sealant can sometimes be overpainted, where the specification allows. We work on hotel bathrooms and public areas, powder-coated and anodised frames and natural stone and brick, and the usual reasons a site gets in touch are fit-outs with a sealant colour in the specification and old sealant that has yellowed, darkened or faded. Searching for sealant specialists in Kent Street? Mastic Doctor has worked for contractors, FMs and building owners since 2005.
Work in smaller places such as Kent Street tends to come one building at a time: a pub kitchen, a hall, a small office. We plan the visit so everything on the list is done in one go, with the right products and colours on hand.
Guaranteed is the last step of every job. Our workmanship is backed for 12 months, and we explain exactly what that covers when we quote.
- Where
- Kent Street (ME18)
- Wider area
- Kent
- Guarantee
- A 12-month guarantee
- Price
- A fixed quote before we start
- Phone
- 01277 525 020
- Updated
- 3 November 2026
When to call us in Kent Street
A change of finish can leave existing sealant mismatched. New cladding colours, repainted frames or a refreshed shop fit all prompt colour changes that the sealant has to follow.
It’s worth sending us details if you spot any of the following:
- Previous reseals that don’t match the original
- Smeared sealant on stone or joinery
- White or grey sealant that clashes with the finish
- Failed coloured sealant that has split or peeled
Occupiers with premises at both Kings Hill Business Park and Mereworth Business Centre could have the sealant at each handled under one quote.
Questions to ask before you book
- Their public liability cover
- The terms of the workmanship guarantee
- Can the work be phased to keep areas open?
- Is the sealant right for the movement and the substrate?
Nearby places to Kent Street
What else we do in Kent Street
Owners, agents and contractors
CHAS accredited and a Constructionline member, we’re straightforward to vet for your supplier list. Our insurance certificate can be sent along with the quote.
When you manage a building on behalf of an owner, clear figures and clear communication matter. You get a fixed quote, an agreed scope and a walk round at the end, plus a 12-month guarantee.
Looking after the joints
Every sealant joint needs some looking after, and how long they last depends on how they’re treated. Our advice:
- Protect fresh coloured sealant from dust and handling
- Standardise colours across a portfolio
- Approve a sample bead on high-profile areas
- Keep the colour details for future repairs
Colours can soften with light and weathering. That is normal for exposed sealant.
Include coloured joints in a planned maintenance cycle. Replacing them on a schedule keeps finishes looking right across the building.
Your questions answered
Can you work at a site such as Kings Hill Business Park, by Kent Street?
Yes. Estates, retail parks and business parks around Kent Street, Kings Hill Business Park among them, are all within reach. Send details of the unit and the work through our quote form for a quick quote.
Can you match sealant colours for premises in Kent Street?
Yes, sealants come in a wide range of standard colours, and matching to RAL references, cladding, stone or frames is a common request. Send colour references or photographs and we’ll confirm what’s available for the product.
Do you take on small jobs?
Single areas, one-off repairs and whole buildings are all quoted the same way: send details, get a fixed quote, we seal, guaranteed.
Which sealant will you use?
If the job is specified, we follow the specification. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.
Are you CHAS accredited?
Yes. We are CHAS accredited, we are a Constructionline member and we use CSCS-carded applicators.
Will you come and look before quoting?
It depends on the job. Straightforward work can often be priced from photographs and measurements, while larger or less clear jobs get a site visit first.
How do you deal with asbestos in old sealant?
Some older mastics, especially in pre-2000 buildings, can contain asbestos. We check the asbestos register before cutting out old sealant in an older building, and work stops until any suspect material has been tested. We don’t remove asbestos-containing materials.
Should maintenance staff do it?
The visible bead is only part of the job. Correct depth, the right primer and a sealant matched to the movement are easy to get wrong without experience.
Certain joints really need a specialist: for example fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. A poor seal in places like these tends to cost more to put right later.
Diagnose, treat, sign off
A typical day starts with protection: masking tape along the joint edges and sheeting over anything nearby. The work itself typically takes a few hours or a phased programme, depending on joint lengths and how many colours are involved, and our waste is bagged and taken away as we go. For a building around Kent Street, tell us how to find it and who will meet us. Add it to your enquiry and we will build it into the plan.
- First we agree which sealant type the joint needs.
- We compare the target colour with the colours available.
- The nearest colour is agreed, with a sample bead where needed.
- The existing bead comes out, then faces are cleaned and backed.
- We mask, seal and tool to a clean line.
- Masking comes off and the work is checked with you.
What we need from you
- Move anything stored against the joints
- Flag any permit to work we’ll need
- Point out any areas we must not close
Ask for a quote
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. The first step is to phone 01277 525 020 or email us with what you know.
Related advice
Coloured sealant in Kent Street: the local picture
At about 26 miles from central London, Kent Street is within reach of the capital. This part of the South East is dense with business parks and out-of-town offices. Multi-site occupiers here often want one sealant contractor across all their buildings. At least three named trading, business or retail sites lie within about 3 miles of Kent Street. Units on sites like these change tenants and get refitted, and each refit leaves joints to seal.
Premises within reach of Wateringbury station, 2.1 miles south-east of Kent Street, often have busy frontages where joints are seen by everyone passing. Offices at parks like Kings Hill Business Park, 0.8 miles to the north-east of Kent Street, have receptions, kitchens and glazed partitions where a tidy joint matters.
Kent Street is about 6 miles west of Maidstone, in Kent. Kent Street sits inside our coverage and the rest of Kent, with the same fixed quotes and 12-month guarantee as everywhere else. We work across 931 places in Kent, from busy centres to rural villages. London is covered too, around 26 miles from Kent Street.
We cover the ME18 postcode districts. Among the streets we cover are Kent Street and Malling Road. Nearby places we also cover include Herne Pound (1 mile south-west), Mereworth (1 mile south), New Pound (1 mile west), Pizien Well (1 mile south-east) and Swanton (1 mile south-west) for colour-matched joints. Nearby towns on our patch include Maidstone (6 miles east), Dartford (14 miles north-west), Sevenoaks (9 miles west), Royal Tunbridge Wells (10 miles south-west), Gravesend (11 miles north) and Tonbridge (7 miles south-west).
Landmarks near Kent Street
In Kent Street, that means premises near The Queens Head Public House and Manor Park Country Park and the streets around them. Kent Street’s nearest station is Wateringbury station, roughly 2.1 miles south-east of the centre. A little further out are Beechin Wood Archery Museum (2.5 miles north-west) and Maidstone Hospital (4.3 miles east).
How the quote is worked out
These are the things that shape the price:
- Specialist products, such as fire-rated or hygienic sealants
- Phasing around occupants
- How much existing material needs removing
- Site requirements such as inductions and permits
No two sites price the same: the joint sizes, the specified product, access and working hours each have a bearing. Send the details and a fixed figure follows.
Details that help us quote
A good diagnosis starts with the right details. Let us know:
- Specification clauses that apply
- A wide shot and a close-up of the area
- What the building is and how it’s used
- Asbestos survey details if the building is older
Every quote starts with the facts: what’s there, how much of it, how we reach it and what’s specified. Send what you have, and we will arrange a site visit if anything is unclear.