Facade Sealing contractors in Inkpen
Facade sealing in Inkpen, backed by over 20 years in commercial sealing. Fully insured and CHAS accredited.
- Old perimeter mastic that has dried out
- Weathered joints at frame-to-structure perimeters
- New sealant peeling off old mastic
Facade sealing in Inkpen
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Facade sealing in Inkpen, done properly
External sealing depends on the weather more than most trades. The sealant needs a dry joint and temperatures inside the maker’s limits, so frosty or damp mornings can hold work back. We plan for that and keep you updated. We work on window and door perimeters, coping and flashing joints and cladding panel joints, and what we’re called in for most is discoloured or dirty facade joints and failed sealant on precast panel joints. A single leaking joint is often how a building in Inkpen first comes to us: we check the joints around it and give you an honest view of what needs doing now and what can wait.
For a site near Inkpen, the mastic visit is planned so the right sealants, primers and backing rod are on hand, timed to the stage the job has reached. Send drawings or photographs and the programme and we will quote to suit.
Whoever the client is, the cover is the same: a 12-month guarantee on our workmanship. Faults in the structure, damage and other trades’ work fall outside it, and we say so plainly.
- Place
- Inkpen (RG17)
- Wider area
- West Berkshire
- Cover
- A 12-month guarantee
- Quotes
- Quoted before any work starts
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
How the quote is worked out
These are the things that shape the price:
- Whether the work must be split into stages
- How accessible the joints are
- Joint width, depth and condition
- Whether old sealant has to be cut out first
The specified product makes a difference, as does the preparation each joint needs. Access, phasing and site rules also count.
Details that help us quote
Whether it’s one area or a whole building, the same details help:
- Asbestos survey details if the building is older
- Where the site is, with the postcode
- Any dates the work must fit around
- What the building is and how it’s used
Every quote starts with the facts: the joints involved, quantities, access and the product called for. Send what you have, and we’ll arrange a site visit if anything is unclear.
On site: what to expect
Working in a building that stays open takes some planning. The work area is signed and kept contained, with routes through the building left open and work section by section so the rest of the building stays in use. Rural sites near Inkpen may need directions, gate codes or a contact on site. Send that with the details and we’ll confirm the plan with the quote.
- We start with photos, drawings or a visit to see the joints and agree access.
- Product choice follows the joint’s movement and substrate.
- The existing bead comes out in full.
- Primer is applied where the maker specifies it.
- Backing rod is fitted and the new sealant gunned in and tooled.
- We go over the completed work with you before leaving.
What we need from you
- Make sure the joints can be reached
- Let building users know which areas are affected
- Send any specification or drawings in advance
Getting a fixed quote
We quote a fixed sum against the scope you give us, so you know the figure before anyone is on site. To ask for one, call the office on 01277 525 020 or email a schedule or drawings.
Related advice
General trades versus a specialist
What you see is the finished bead, but most of the work is hidden. Backing rod, primer where specified and a joint designed to move with the building are easy to get wrong without experience.
A short, simple internal joint is often within reach of a maintenance team. The usual problems come from preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
Nearby places to Inkpen
Also in Inkpen
Questions about Inkpen
Is a smaller place like Inkpen outside your area?
Not at all: smaller places are covered as well as towns. We work across Greater London and the South East. We plan jobs in smaller places so return trips are kept to a minimum.
Do you cover business parks and estates near Inkpen, such as Stype Business Centre?
Yes. We cover Inkpen and the area around it, including industrial estates, business parks and retail parks such as Stype Business Centre. To start, just speak to us on 01277 525 020 or email a schedule or drawings with the unit, the joints involved and your access times.
Can you just add new sealant on top?
No. Fresh silicone won’t grip cured silicone, so the existing bead is removed entirely and the faces are cleaned before resealing. Nothing else gives a bond that lasts.
Can one quote cover more than one building?
Yes. A group of buildings can go on one quote, with one point of contact across South East England, Greater London and Scotland.
Does weather matter for sealant work?
It can, for external work. Sealant won’t bond properly to a wet or frosty joint, so external work may be moved if conditions aren’t right. Indoors, the weather is rarely a problem.
Can you fit around our working hours?
The office is staffed Monday to Friday, from 8am until 5pm. Let us know your site hours and access windows, and the work will be planned around them.
When can the area be used after sealing?
The product and site conditions decide that. Some take light use quickly, others need longer to cure, so we’ll confirm the curing time on the day.
Keeping the joints sound
After handover, a little attention goes a long way:
- Keep sills, gutters and drainage paths clear
- Inspect facade joints on a regular cycle
- Keep the sealant details on the building file
- Share access with other external trades
Keep a note of which product went in and when. Future work can then match the product and colour without guesswork.
Tie resealing in with redecoration, cladding repairs or other access. One set-up for several trades saves money.
Contractors’ notes for Inkpen
Central London is about 60 miles from Inkpen. Building activity in the commuter belt runs from new flats near stations to business park refurbishments, and main contractors there need mastic that keeps to the programme. The South East is one of the drier parts of the UK. Winter mornings still bring frost and condensation on frames and panels, so external mastic is timed for workable conditions and agreed with the site manager.
Projects at schools like Inkpen Primary School work to term dates, so mastic is programmed tightly. For contractors refurbishing units at places like Stype Business Centre, which lies west of Inkpen, the mastic covers cladding panels, roller-door and window perimeters.
Inkpen is about 6 miles west of Newbury, in West Berkshire. Businesses, contractors and managing agents in Inkpen use us for work on facade joints, as part of our coverage of West Berkshire. Inkpen is one of 140 places we cover in West Berkshire for facade joints. There’s a separate page for Reading, roughly 22 miles from Inkpen.
Business premises anywhere in RG17 are within our area. We cover commercial and managed buildings on Folly Road, Post Office Road and Robins Hill. Close to Inkpen, our area also takes in Inkpen Common (1 mile south-east), Upper Green (1 mile south), Hell Corner (1 mile east), Lower Green (1 mile west) and Kintbury (2 miles north-east). Bigger towns within reach include Newbury (6 miles east), Thatcham (9 miles east), Speenhamland (6 miles east), Hungerford (3 miles north-west), Lambourn (9 miles north) and Shaw (7 miles east).
Around Inkpen
We work on buildings around Crown and Garter pub and the streets around them. The closest station to Inkpen is Kintbury station, roughly 1.9 miles north-east. A little further out are Hamstead Marshall 3 (3.3 miles north-east). For a walk, there’s Kintbury Newt Ponds and Inkpen Hill.
What we’re called out for in Inkpen
Sun, rain and temperature swings wear facade sealant down over the years. UV and weather harden the sealant until it can’t stretch with the building, and cracks or adhesion loss follow.
Look out for the following:
- Draughts around frames and panels
- Leaks at window and door perimeters
- Gaps between rainscreen or cladding panels
- Weathered facade joints that have lost their grip
Historic houses such as Stargroves, 3.2 miles to the south-east of Inkpen, are a reminder of the older buildings in the wider area, where sealing against old stone, brick or timber needs compatible products.
What to look for in a quote
- Proof of insurance
- How they’ll work around occupants
- Is depth set with backing rod, or bond-breaker tape in shallow joints?
- How they handle RAMS and site documents
Building owners, agents and FMs in Inkpen
We work for building owners and managing agents on everything from one building to a spread of sites around Inkpen. Several sites can go on one quote, so there’s one set of paperwork to deal with.
Hotels, schools, healthcare sites, offices and retail units book us directly too. The work is planned around how the building runs, so guests, pupils, patients or staff are disturbed as little as possible.