Fire-rated sealing and fire stopping in Greenlaw, Scottish Borders
Looking for fire stopping in Greenlaw? It’s simple: send details, get a quote, we seal, guaranteed.
- Unsealed joints where partitions meet the slab
- Damaged fire seals in risers and voids
- Openings found when ceilings come down for a refit
Fire stopping for businesses in Greenlaw
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
How we handle fire stopping in Greenlaw
A lot of fire-stopping work comes after M&E installation, a refit or a tenant fit-out. Each new cable, pipe or data route cut through a fire-resisting wall leaves an opening behind. Those on your schedule are closed with the specified product. If you are dealing with hidden openings found during inspections and fire sealant pulled out of the opening, we can help, whatever the surface. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, the work in Greenlaw is the same: the right product in a properly prepared joint.
For a building near Greenlaw, we plan fire-rated sealing so it’s finished in one visit where possible. Send the specification and photos of the openings, with sizes if you have them.
Guaranteed is the last step of every job. Our workmanship is backed for 12 months, and the quote explains what it covers.
- Where
- Greenlaw (TD10)
- Wider area
- Scottish Borders
- Cover
- A 12-month guarantee
- Price
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Updated
- 3 November 2026
What affects the price in Greenlaw
There’s no standard rate for sealant work, since sites vary so much. What we take into account:
- Location, for remote and island sites
- How much existing material needs removing
- Any access equipment needed
- Which sealant the job calls for
Pricing service penetrations depends on how many there are, their condition and the access, and any specification that applies. Ask us for a fixed quote.
What to include in your enquiry
There’s no need for a formal survey. These details are enough to start:
- Rough lengths or quantities, or drawings if you have them
- What the building is and how it’s used
- Any dates the work must fit around
- The product your specification calls for
To get a fixed quote, speak to us on 01277 525 020 or email the details over, telling us the site location and the nature of the job. You can also send details through our quote form.
From enquiry to sign-off
Diagnose, treat, sign off: that’s the shape of every visit. First comes an inspection and agreement on scope, then we prepare and seal each joint with the specified product, and we finish with a walk round so the work can be signed off. Jobs near Greenlaw are often grouped with others in the same area, to make the most of each trip. Tell us how flexible your dates are.
- First we confirm the product and tested details named in the specification.
- Openings are measured and grouped by detail.
- Improvised fillers and failed sealant are removed.
- Where the detail needs backing, it goes in at the stated depth.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- We walk the completed areas with you and confirm the records agreed at quote stage.
Getting the site ready
- Tell us what induction or permit system the site runs
- Share the asbestos register for older buildings
- Make sure the joints can be reached
Ask for a quote
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. The first step is to call the office on 01277 525 020 or send details through our quote form with what you know.
Read more
Looking after the joints
A few simple habits keep the new joints working:
- Put resealing into every M&E and fit-out package
- Ask the designer to confirm details early on refits
- Ask which product is in place before decorating
- Look above ceilings when tiles are lifted for other jobs
Add risers, plant rooms and ceiling voids to routine fire-stopping checks. Watch for cracked sealant, new services with no seal and openings that have grown and get them dealt with.
Ask every contractor who works in risers or voids to report openings they create. Small habits like this stop openings building up.
Surface by surface
Cables and cable bundles
Data cabling added after handover is a regular cause of open service penetrations. Openings around new cables are resealed to the detail.
Masonry and concrete
Many seals are made in blockwork, brickwork or concrete slabs. Dust and debris are cleared from the opening, with backing added if the detail requires it.
What we can’t put right
Our job is the joint, not everything around it. On its own, sealant can’t deal with:
- Large openings beyond what any sealant detail covers
- Signing off or certifying a building’s fire stopping
- Designing or specifying fire stopping, which sits with the designer or fire engineer
Not sure which it is? You can give us a call on 01277 525 020 or email drawings and photos and we’ll tell you honestly.
Joints and surfaces we work on
- Small duct penetrations where the tested detail allows
- Pipe penetrations
- Joints between fire-resisting walls and floors
- Linear gaps at wall heads
- Cable penetrations
- Service gaps in risers
Also near Greenlaw
Other services in Greenlaw
Fire-rated sealing for Greenlaw buildings
Under the Scottish non-domestic Technical Handbook, clause 2.1.14, penetrations should be fire stopped to at least the wall or floor’s fire resistance duration, with products tested for that end use. Our part is installing the specified fire-rated sealant to its tested detail.
For a building such as Greenlaw Parish Church, new heating or data runs are the usual reason penetrations need sealing. Hotels such as Blackadder Hotel (to the south-west of Greenlaw) rely on fire-resisting walls between bedrooms and corridors, and refits that add services leave penetrations to seal where fire-rated sealant is specified.
Greenlaw is about 15 miles north-east of Galashiels, in the Scottish Borders. Our applicators travel to Greenlaw for work on service penetrations, handled exactly as we handle every other area. 91 places across the Scottish Borders fall within our area, including Greenlaw. Sites around Edinburgh have their own page, about 33 miles away.
Commercial sites across TD10 are covered. If your site is on The Square, East High Street and West High Street or close by, send details and we will quote for service penetrations. We also cover Eccles (4 miles south-east), Gordon (4 miles south-west), Stichill (5 miles south), Gavinton (5 miles north-east) and Westruther (5 miles north-west). Bigger towns within reach include Galashiels (15 miles south-west), Kelso (7 miles south), Duns (7 miles north-east), Melrose (13 miles south-west), Earlston (10 miles south-west) and Lauder (11 miles west).
Around Greenlaw
We work on buildings around Cross Keys pub and the streets around them. Well-known places in the area include Hume Castle (2.9 miles south). Open spaces near Greenlaw include Hule Moss.
Commercial clients in Greenlaw
Main contractors use us as their sealant subcontractor. Programme, specification and site rules come first, and our applicators hold CSCS cards.
Hotels, schools, healthcare sites, offices and retail units come to us directly as well. The work is planned around how the building runs, so guests, pupils, patients or staff are disturbed as little as possible.
Questions about Greenlaw
Which Scottish guidance covers penetration seals in Greenlaw?
Under Scotland’s non-domestic Technical Handbook (clause 2.1.14), service penetrations should keep at least the wall or floor’s fire resistance duration, using products tested for their end use. We install what has been specified, to the manufacturer’s tested detail, while design and approval sit with the designer and the verifier.
Can you produce the fire-stopping design for a job in Greenlaw?
No, that sits with the designer, fire engineer or building control. Our part is installing the specified product to its tested detail, and telling you if the detail calls for something other than sealant.
How long will the new sealant last?
Nobody can honestly give a figure in years, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular checks let you plan resealing before leaks or damage.
Can one quote cover more than one building?
Yes. A group of buildings can go on one quote, with one point of contact across South East England, Greater London and Scotland.
Do you hold CHAS accreditation?
Yes. Mastic Doctor is CHAS accredited and a Constructionline member, which helps with supplier vetting.
Are you insured?
Yes. Mastic Doctor is fully insured, public liability included.
Is any job too small?
Whatever the size, the process is the same: details, then a fixed price, then sealing, then a 12-month guarantee.