Gorthleck fire stopping
Fire stopping in Gorthleck, backed by over 20 years in commercial sealing. Fully insured and CHAS accredited.
- Openings found when ceilings come down for a refit
- Head-of-wall gaps with no fire seal
- Fire stopping installed outside its tested range
Fire stopping in Gorthleck
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Fire stopping for commercial buildings in Gorthleck
Our applicators are CSCS-carded, and we are CHAS accredited and a Constructionline member. We hold no third-party fire-stopping installer certificate. We install the specified fire-rated sealant to its tested detail, and our workmanship carries a 12-month guarantee. If you have improvised or mixed-product fire seals and hidden openings found during inspections, we can help, whatever the surface. A single leaking joint is often how a building in Gorthleck first comes to us: we check the joints around it and give you an honest view of what needs doing now and what can wait.
In smaller Scottish places like Gorthleck, buildings with fire-resisting walls typically include schools, care homes, hotels and health centres. Where services pass through, specified fire-rated sealant is installed following the manufacturer’s guidance for that wall or floor.
A 12-month guarantee applies to all our work. If an installation problem shows up, call the office on 01277 525 020 or send photos by email and we’ll arrange a return visit.
- Place
- Gorthleck (IV2)
- Wider area
- Highland
- Cover
- A 12-month guarantee
- Quote
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Updated
- 3 November 2026
Fire-rated sealing for Gorthleck buildings
Scotland has its own building standards: the non-domestic Technical Handbook (clause 2.1.14) says service penetrations should be fire stopped to at least the fire resistance duration of the wall or floor, using products tested for the way they’re used. Where fire-rated sealant is specified, that’s what we install, to the tested detail.
Buildings near Gorthleck get the fire-rated product that’s specified, installed to its tested detail.
Gorthleck is about 17 miles south-west of Inverness, in Highland. We cover commercial sites throughout Gorthleck, whether it’s a single job or part of a planned programme. Our Highland coverage takes in 256 places. Dundee is covered too, around 77 miles from Gorthleck.
We cover the IV2 postcode districts. We also cover Stratherrick (5 miles south-west), Torness (6 miles north-east), Lewiston (6 miles north), Drumnadrochit (6 miles north) and Invermoriston (7 miles west). For island and remote sites, we plan travel and materials carefully, so the full address helps from the start.
Around Gorthleck
Not far away are Loch Mhòr and Cnoc a' Choimleum.
Owners, agents and contractors
We take on planned maintenance as well as one-off repairs: resealing failed joints building by building, on a schedule that suits your budget. Sites in Gorthleck can sit alongside others in a wider programme.
CHAS accredited and a Constructionline member, we make supplier vetting simple. Our insurance certificate can be sent along with the quote.
Our process
In a busy building, the work is phased so only one area is out of use at a time. Each area is protected, prepared and sealed, then reopened once the sealant allows before we move to the next. Tell us who will meet us and how to get in at your building near Gorthleck. That goes into the plan alongside the quote.
- We ask for the product and detail your designer has specified.
- Openings are measured and grouped by detail.
- Improvised fillers and failed sealant are removed.
- Mineral wool or other backing is fitted where required.
- We gun the sealant in to the specified depth around each service and tool it.
- Completed areas are checked with you, with the records agreed when we quoted.
Before we start on site
- Clear stock, furniture or equipment away from the joints
- Explain the parking and delivery arrangements
- Let us know about inductions and permits
Ask for a quote
To get a fixed quote, call the office on 01277 525 020 or use the quote form, telling us the site location and the nature of the job. Our quote form is another easy route.
Advice
Why deal with it now?
Inspections and handover checks often pick up fire stopping. Finding unsealed or improvised openings late can hold up a programme, so earlier action pays back. Exposed buildings in Scotland take a lot of weather, and for a smaller place like Gorthleck, a repair visit takes planning, so it’s better to act early.
No two sites price the same: joint size, product, access and site hours all play a part. A fixed quote follows once we understand the job.
What you get with us
- Joints cleaned back to sound surfaces
- A Constructionline member, so easy to vet
- Work carried out by CSCS-carded applicators
- Over 20 years of commercial sealing
Read how commercial sealant jobs are priced or our accreditations and insurance.
Site staff or a sealant specialist?
Certain joints really need a specialist: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. Getting these wrong normally costs more in the end than doing them right.
There’s also the paperwork. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and we will confirm the paperwork you need with the quote.
Common questions from Gorthleck clients
Do you decide the fire-stopping details for buildings in Gorthleck?
No. Fire-stopping design and sign-off belong to the designer, principal designer, fire engineer or building control. We install what’s specified, to the product’s tested detail.
What do Scotland’s building standards say about service penetrations in Gorthleck?
Scotland’s non-domestic Technical Handbook covers it in clause 2.1.14: penetrations keep at least the element’s fire resistance duration, with products tested for their end use. Design sits with the designer and the verifier; installation to the tested detail is our part.
How long before the joints can be used?
That comes down to the sealant and the temperature. Some take light use quickly, others need longer to cure, so we’ll confirm the curing time on the day.
Are you CHAS accredited?
Yes. We’re CHAS accredited, we are a Constructionline member and we use CSCS-carded applicators.
Do you work to architects’ specifications?
Yes. Include it with the drawings when you ask for a quote, and the quote will be based on it, flagging anything that needs clarifying.
Will you just go over the old sealant?
No. Failed sealant is removed and the faces cleaned back to sound, dry material first, because fresh silicone will not bond with aged silicone.
How do you choose the sealant?
If the job is specified, we follow the specification. If not, we choose for the movement, the surfaces and the conditions, in line with the manufacturer’s guidance.
When to call us in Gorthleck
On a busy project, programme pressure can mean fire stopping is rushed or left to whichever trade is closest. That is how unsuitable products and improvised details end up in compartment walls, which then have to be put right.
Things that usually lead to an enquiry:
- Seals disturbed by maintenance and left open
- Service penetrations left open after M&E works
- Openings found when ceilings come down for a refit
- Penetration schedules that need working through
For any site around Gorthleck, we work to the specification and the manufacturer’s installation guidance, leaving design and sign-off with the designer.
Before you book anyone
- How long is the guarantee, and what does it include?
- Is the sealant right for the movement and the substrate?
- Their approach to joint depth and backing
- Who will actually carry out the work
Also near Gorthleck
More services for Gorthleck
Looking after the joints
Sealant joints are maintenance items, and their life depends on movement, exposure, cleaning and use. Our advice:
- Keep general-purpose fillers away from compartment walls
- Settle who seals which penetrations at the start of a project
- Treat an open penetration as a priority repair
- Look above ceilings when tiles are lifted for other jobs
New services after handover are a common way fire stopping gets breached. Building it into each contractor’s sign-off keeps the walls intact.
Write fire stopping into the scope of any work crossing a compartment wall or floor. Then the seal goes in while the area is open.