Stratherrick fire stopping
Fire stopping in Stratherrick, backed by over 20 years in commercial sealing. Fully insured, with a 12-month guarantee.
- Seals disturbed by maintenance and left open
- Fire stopping installed outside its tested range
- Unsealed openings around new pipes and cables
Need fire stopping in Stratherrick?
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Fire-rated sealing for Stratherrick buildings
Scottish guidance (non-domestic Technical Handbook, clause 2.1.14) asks that penetrations match at least the fire resistance period of the element they pass through, with products tested for that end use. Where fire-rated sealant is specified, that’s what we install, to the tested detail.
For buildings in and around Stratherrick, fire-rated sealant is installed where it is specified, to the manufacturer’s tested detail.
Stratherrick is about 22 miles south-west of Inverness, in Highland. If you are looking for fire stopping in Stratherrick, we can help, as we do across Highland. 256 places across Highland fall within our area, Stratherrick among them. Dundee is covered too, around 77 miles from Stratherrick.
Anyone looking for fire stopping in IV2 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. If your building is just outside Stratherrick, we cover Invermoriston (4 miles north-west), Gorthleck (5 miles north-east), Fort Augustus (7 miles south-west), Newtown (9 miles south-west) and Lewiston (10 miles north). For island and remote sites, travel and materials need planning ahead.
Near you in Stratherrick
Green spaces nearby include Loch Knockie and Cnoc a' Choimleum.
About our fire stopping in Stratherrick
For main contractors, our fire stopping package slots in after the M&E trades have finished in an area. To price a package, give us a call on 01277 525 020 or email the details over with the schedule or marked-up drawings. Tell us what records you need and we’ll confirm with the quote. If you’re dealing with seals that don’t match their tested detail and fire-stopping items raised at inspection or handover, we can help, whatever the surface. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: in Stratherrick, that means joint design, primers and backing rod as standard.
Hotels and care homes around smaller places like Stratherrick often have services added during refurbishment. A round of checks after M&E work is good practice, and any gaps found are sealed where fire-rated sealant is specified.
Building owners and contractors get the same cover: twelve months on the work we carried out. Faults in the structure, damage and other trades’ work fall outside it, and we say so plainly.
- Where
- Stratherrick (IV2)
- Region
- Highland
- Cover
- A 12-month guarantee
- Quote
- A fixed quote before we start
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Towns and villages near Stratherrick
What else we do in Stratherrick
What the job involves on each surface
Drylining partitions
Service holes through plasterboard are frequently oversized or ragged. An oversized hole may be outside the sealant’s range and we will tell you what the detail says instead.
Plastic pipes
Plastic waste pipes through slabs come up often. Whether sealant alone is acceptable depends entirely on the tested detail, and we won’t substitute it for a specified collar.
Common problems we fix in Stratherrick
Mixing products or improvising a detail breaks the link with the test evidence. An oversized gap, too shallow a bead, missing backing or two makers’ products combined are the usual culprits.
It’s worth sending us details if you spot any of the following:
- Unsealed joints where partitions meet the slab
- Expanding foam used as fire stopping
- Old intumescent sealant that has split away
- Improvised or mixed-product fire seals
Hotels like Whitebridge Hotel, 1.2 miles to the north-east of Stratherrick, are refurbished in phases, and each phase can open up compartment walls.
Questions to ask before you book
- The named product and why it was chosen
- Whether old or failed sealant will be cut out, not overlaid
- How long is the guarantee, and what does it include?
- Are they CHAS accredited or on Constructionline?
Keeping the joints sound
To get the most from the new sealant:
- Keep product data and details in the fire safety file
- Don’t let anyone top up a fire seal with the wrong product
- Get seals inspected before ceilings and boxing close
- Leave fire sealant to cure fully before covering it
Keep the product data and installation details with the building’s fire safety information. It makes later repairs much easier to match.
Specify fire stopping early on refits, not as an afterthought. Details can then be picked to suit the actual pipes, cables and ducts, and the work runs in step with the M&E.
On site: what to expect
At the end of each section, the masking comes off, the area is cleaned and every joint is checked, ready for your sign-off. Where the sealant needs time to cure before use, we tell you and sign the area. Where we can, we combine work around Stratherrick with other jobs nearby, to make the most of each trip. Let us know if your dates have any give.
- We read the specification, drawings or penetration schedule you send.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- Mineral wool or other backing goes in wherever the detail asks.
- We apply the specified sealant to the depth and around the services as the detail shows.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
Before we start on site
- Point out any areas we must not close
- Move anything stored against the joints
- Tell us what induction or permit system the site runs
Getting a fixed quote
Send us photos, drawings or a joint schedule and a fixed quote comes back to you. Where a site visit makes more sense, we will arrange one.
Related advice
Quoting for work in Stratherrick
To price the job, we consider:
- The total length or number of joints
- Whether old sealant has to be cut out first
- Access and working height
- Site requirements such as inductions and permits
Larger quantities, tricky access or phasing all shape the price. So do site requirements such as inductions and permits, along with the time of year for external work.
What to include in your enquiry
For an accurate fixed quote, we need a clear picture of the site. Useful things to include:
- Any dates the work must fit around
- Clear photos of the problem areas
- Specification clauses that apply
- Whether the building will be occupied during the work
Send details, get a quote, we seal, guaranteed: that’s how every job runs. To take the first step, call the office on 01277 525 020 or email the details over.
Your questions answered
Is a smaller place like Stratherrick outside your area?
Not at all: smaller places are covered as well as towns. We work across every Scottish council area. Where we can, we group nearby jobs to make the most of each trip.
Will you design a fire-stopping scheme for our building in Stratherrick?
No, that sits with the designer, fire engineer or building control. Our part is installing the specified product to its tested detail, and telling you if the detail calls for something other than sealant.
Can the sealant be colour-matched?
In many cases, yes. Many products come in a range of standard colours, and matching to RAL references or surrounding finishes is often possible. We’ll confirm the colours available for the specified product.
How long before the joints can be used?
The product and site conditions decide that. Some take light use quickly, others need longer to cure, and we confirm it before leaving site.
Are you insured?
Yes. We’re fully insured, and the certificate can go with your quote.
How do you deal with asbestos in old sealant?
Some older mastics, especially in pre-2000 buildings, can contain asbestos. Before we disturb old sealant in an older building, we ask to see the asbestos register or survey, and work stops until any suspect material has been tested. We don’t remove asbestos-containing materials.
Can weather delay the job?
For external joints, yes. Sealant needs a dry joint and a temperature within the product’s range, so damp, frosty or very cold days can stop external work. Inside work is seldom held up.
Work for main contractors and building owners
If you look after buildings for someone else, clear figures and clear communication matter. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative.
Whether you are a managing agent, a property factor or an owner’s representative: send the details, accept a fixed quote, and we carry out and guarantee the work. We can agree access arrangements and keyholder contacts beforehand.