Fire-rated sealing and fire stopping in Gilmerton, Perth and Kinross
Our CSCS-carded applicators take on fire-rated and intumescent sealing of service penetrations and linear gaps in Gilmerton and the surrounding area. Send photos or drawings for a fixed quote.
- Seals disturbed by maintenance and left open
- Builders’ foam or ordinary silicone in compartment walls
- Hidden openings found during inspections
Fire stopping near Gilmerton
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
How we handle fire stopping in Gilmerton
On a fit-out or refurbishment, we follow the services contractors floor by floor. To price a package, give us a call on 01277 525 020 or email us with the schedule or marked-up drawings. Tell us what records you need and we’ll confirm with the quote. Most enquiries involve fire-stopping items raised at inspection or handover and unsealed penetrations discovered above suspended ceilings, across joints between fire-resisting walls and floors, service gaps in risers and small duct penetrations where the tested detail allows. One point of contact handles commercial sealant work in Gilmerton from the first photos to the final walk-round, whether it’s one building or several.
Refurbishments in small hotels, schools and care homes around places like Gilmerton can leave gaps around new services. A round of checks after M&E work is good practice, and any gaps found are sealed where fire-rated sealant is specified.
Whoever the client is, the cover is the same: twelve months on the work we carried out. Faults in the structure, damage and other trades’ work fall outside it, and we say so plainly.
- Place
- Gilmerton (PH7)
- Wider area
- Perth and Kinross
- Cover
- 12 months on every job
- Price
- Quoted before any work starts
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Compartments and services around Gilmerton
Two care or nursing homes sit less than 2 miles from Gilmerton. Care settings depend on compartmentation, so service penetrations made during maintenance or refurbishment need sealing with the specified product. A number of hotels sit less than 2 miles from Gilmerton. In hotels, bedroom and corridor walls are normally fire-resisting, so services added in a refit need sealing with the specified product.
Hotels such as Cultoquhey House Hotel (to the south-east of Gilmerton) rely on fire-resisting walls between bedrooms and corridors, and refits that add services leave penetrations to seal where fire-rated sealant is specified. Office fit-outs on sites such as Crioch Business Centre, 2.1 miles to the south-west of Gilmerton, add cabling and pipework through fire-resisting walls, and fire-rated sealant goes in where the specification calls for it. Halls and meeting rooms at places like Gilmerton Church House sometimes gain new services, and any compartment wall crossed needs the specified seal.
Gilmerton is about 14 miles west of Perth, in Perth and Kinross. Our applicators travel to Gilmerton for work on service penetrations. 114 places across Perth and Kinross fall within our area, including Gilmerton. There’s a separate page for Dundee, roughly 32 miles from Gilmerton.
Postcode districts covered here: PH7. Buildings on Grahame Terrace and Perth Road are within our area. We also cover Crieff (2 miles south-west), St David's (4 miles south-east), Muthill (4 miles south), Madderty (4 miles south-east) and Tullibardine (6 miles south) for service penetrations. Nearby towns on our patch include Perth (14 miles east), Auchterarder (8 miles south-east), Letham (13 miles east), Tulloch (13 miles east), Oakbank (13 miles east) and Hillyland (12 miles east).
Landmarks near Gilmerton
A little further out are Crieff and Strathearn Museum (1.9 miles south-west) and Castle Cluggy (2.9 miles west). Open spaces near Gilmerton include Loch Monzievaird.
Places near Gilmerton
Also in Gilmerton
Common questions from Gilmerton clients
How do Scotland’s building standards affect fire-rated sealant in Gilmerton?
Scotland’s non-domestic Technical Handbook covers it in clause 2.1.14: penetrations keep at least the element’s fire resistance duration, with products tested for their end use. The detail is set by the designer and goes through the warrant process; we install the specified product to its tested detail.
Is Crioch Business Centre, near Gilmerton, within your area?
Yes, sites like Crioch Business Centre are within our area, along with the rest of Gilmerton. A few photographs and the unit address let us price the work.
Do you need to see the site first?
Many jobs can be quoted from photos, drawings or a joint schedule. If the job needs a look first, we’ll arrange a visit.
Can one quote cover more than one building?
Yes. Multi-site work and planned programmes are a core part of the service, planned site by site to suit how each building is used.
When is resealing likely to be due?
It depends on movement, UV and weather, cleaning, traffic and the product. Sealant joints are maintenance items, so inspect them regularly.
Are you insured?
Yes. We’re fully insured, including public liability cover.
Can you send site paperwork?
Tell us what site paperwork you need (RAMS, insurance certificate, CSCS details) and we will confirm with the quote.
Owners, agents and contractors
Whether you are a managing agent, a property factor or an owner’s representative: send details, get a fixed quote, we seal, guaranteed. We can agree access arrangements and keyholder contacts beforehand.
We work for building owners and managing agents on everything from one building to a spread of sites around Gilmerton. One quote can cover more than one site, which keeps the paperwork simple.
Our process
On arrival, we sign in, go through any site induction and check how permits are handled. Everything around the joints gets protected before any cutting starts, and the work typically takes a single visit for a short list of penetrations, or a phased programme for a whole building. For a building near Gilmerton, directions, keys and a contact on the day are worth sorting early. We will confirm the plan with the fixed quote.
- The specification and schedule come first, so we know which details apply.
- Access, permits and the order of areas are agreed with the site team.
- Each opening is checked for wall or floor type, service, gap and depth.
- Foam, ordinary sealant and debris come out.
- The specified backing and sealant go in to depth and are finished neatly.
- Anything outside the detail is reported to you rather than sealed.
Preparing the site
- Clear stock, furniture or equipment away from the joints
- Tell us your opening times and when work is allowed
- Agree which areas must stay open
Getting a fixed quote
Quotes are fixed against the scope you send, so you know the figure before anyone is on site. To ask for one, phone 01277 525 020 or send details through our quote form.
Read more
Why act early in Gilmerton
Leave a penetration open and smoke and fire can cross into the next compartment far earlier than intended. Putting it right is normally a modest job when the openings are accessible. Left until ceilings are closed or a tenant moves in, the same work costs more access and more disruption. Buildings that aren’t in daily use, such as halls and seasonal premises, may let water in unnoticed, giving water time to get in. Early resealing prevents it.
The price depends on how many linear metres there are, how much old material needs removing and the access. Call for a fixed quote when you are ready.
What you get with us
- 12-month guarantee on workmanship
- Constructionline member for supplier checks
- Fully insured, including public liability cover
- Health and safety: CHAS accredited
Different surfaces, different methods
Masonry and concrete
Openings through concrete vary from tidy cores to rough break-outs. The gap is measured at the widest point against the detail’s limits.
Drylining partitions
Drylined fire walls are tested in a particular build-up. We check that the product’s detail covers that partition type and board thickness first.
Site staff or a sealant specialist?
A short, simple internal joint is often within reach of a maintenance team. The usual problems come from preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
Certain joints really need a specialist: for instance fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. A poor seal in places like these tends to cost more to put right later.
Honest limits
Being straight saves everyone time. Fresh joints won’t solve:
- Fire risk assessments, a job for a competent assessor
- Openings that need collars, wraps, batts or boards rather than sealant
- Writing the fire-stopping specification
If in doubt, speak to us on 01277 525 020 or email drawings and photos and we’ll say what we think before you book.
Surfaces we seal
- Pipe penetrations
- Service gaps in risers
- Joints between fire-resisting walls and floors
- Linear gaps at wall heads
- Small duct penetrations where the tested detail allows
- Cable penetrations