Fire Stopping in Madderty
Fire-rated and intumescent sealing of service penetrations and linear gaps in Madderty. CHAS accredited and fully insured, with a 12-month guarantee.
- Old intumescent sealant that has split away
- Non-fire-rated filler around services
- Improvised or mixed-product fire seals
Fire stopping near Madderty
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
About our fire stopping in Madderty
No fire sealant works on its own: the evidence covers a specific product, wall or floor type, service, gap, depth and backing. We match each opening to that detail before any sealant goes in, and we say so if it doesn’t fit. If you’re dealing with seals disturbed by maintenance and left open and improvised or mixed-product fire seals, we can help, on pipe penetrations, linear gaps at wall heads and joints between fire-resisting walls and floors alike. A single leaking joint is often how a building in Madderty first comes to us: we check the joints around it and give you an honest view of what needs doing now and what can wait.
For a building near Madderty, we plan fire-rated sealing so it’s finished in one visit where possible. Send the specification and photographs of the openings, with sizes if you have them.
Building owners and contractors get the same cover: a 12-month guarantee on our workmanship. Faults in the structure, damage and other trades’ work fall outside it, and we say so plainly.
- Location
- Madderty (PH7)
- Region
- Perth and Kinross
- Cover
- 12 months on every job
- Quote
- A fixed quote before we start
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Fire stopping in Madderty: the local picture
Scotland has its own building standards: the non-domestic Technical Handbook (clause 2.1.14) says service penetrations should be fire stopped to at least the fire resistance duration of the wall or floor, with products tested for that end use. Where fire-rated sealant is specified, that’s what we install, to the tested detail.
For a hospital such as St Margaret's Hospital, which lies south of Madderty, penetration sealing is normally phased ward by ward, with infection-control rules agreed first.
Madderty is about 5 miles north of Auchterarder, in Perth and Kinross. Businesses, contractors and managing agents in Madderty can call on us for service penetrations, as part of our coverage of Perth and Kinross. Madderty is one of 114 places we cover in Perth and Kinross for service penetrations. Sites around Dundee have their own page, roughly 29 miles from Madderty.
Work on service penetrations is covered throughout PH7. If your building is just outside Madderty, we cover St David's (1 mile south-west), Balgowan (3 miles north-east), Aberuthven (4 miles south-east), Gilmerton (4 miles north-west) and Tullibardine (5 miles south). Nearby towns on our patch include Perth (10 miles east), Crieff (5 miles west), Kinross (15 miles south-east), Letham (9 miles east), Scone (12 miles east) and Tulloch (9 miles east).
Landmarks near Madderty
A little further out are St Margaret's Hospital (5.1 miles south) and Strathallan Castle (3.8 miles south-west).
Towns and villages near Madderty
Also in Madderty
Common problems we fix in Madderty
Plenty of openings were simply never closed because they sat out of sight above a ceiling or inside a riser. They come to light during inspections, refits or when another trade lifts a tile.
Common reasons buildings call us in:
- Improvised or mixed-product fire seals
- Hidden openings found during inspections
- Unsealed joints where partitions meet the slab
- Fire sealant pulled out of the opening
For buildings in and around Madderty, fire-rated sealant is installed where it is specified, to the manufacturer’s tested detail.
What your quote should include
- Do they follow the manufacturer’s priming guidance?
- Is the sealant right for the movement and the substrate?
- Their plan for phasing and protecting the area
- How they handle RAMS and site documents
How the quote is worked out
A fixed quote reflects the actual work. It takes account of:
- The total length or number of joints
- How accessible the joints are
- Backing rod, priming and other preparation
- Induction, permit and paperwork requirements
A quote for service penetrations depends on how many there are, their condition and the access, and any specification that applies. Call for a quote.
Details that help us quote
Whether it’s one area or a whole building, these details speed things up:
- Asbestos survey details if the building is older
- Access details, including height
- The product your specification calls for
- A wide shot and a close-up of the area
Need a figure for a tender or a budget? Send the scope and any drawings, and we’ll return a fixed quote you can plan around. For a chat about it beforehand, give us a call on 01277 525 020 or send photos by email.
After the work
To get the most from the new sealant:
- Don’t let anyone top up a fire seal with the wrong product
- Check risers and ceiling voids after each round of works
- File the specified details where the next contractor can find them
- Have penetrations checked while they can still be seen
Add risers, plant rooms and ceiling voids to routine fire-stopping checks. Look for cracks, unsealed new cables and gaps that have been enlarged, and report them promptly.
Make reporting new openings part of every permit to work in service areas. Small habits like this stop openings building up.
Common questions from Madderty clients
How do Scotland’s building standards affect fire-rated sealant in Madderty?
The non-domestic Technical Handbook, clause 2.1.14, expects a penetration to keep at least the wall or floor’s fire resistance period, with proprietary products tested for the use they’re put to. Design sits with the designer and the verifier; installation to the tested detail is our part.
Can you work on a hospital site such as St Margaret's Hospital?
Yes. Healthcare sites are among the places we work. Work is phased so departments keep running, under the site’s own rules.
When is resealing likely to be due?
Nobody can honestly give a figure in years, since movement, weather, cleaning and use all affect it. Regular inspection is the best way to catch problems early.
Is the work guaranteed?
Yes. The 12-month guarantee covers our preparation and application, though not damage or work by other trades.
Will you quote for a small job?
Whatever the size, the process is the same: details, then a fixed price, then sealing, then a 12-month guarantee.
How long does a typical visit take?
We plan the time on site around your programme and access. We’ll give you an estimate of time on site when we quote.
Do you have public liability insurance?
Yes. We are fully insured, including public liability cover.
Doing it in-house
Redoing a failed joint usually costs more than getting it right at the outset, because the whole bead must be removed and the faces cleaned back again. That’s why many clients bring in a specialist from the beginning.
What you see is the finished bead, but most of the work is hidden. Correct depth, the right primer and a sealant matched to the movement are easy to get wrong without experience.
Why it’s worth doing now in Madderty
A seal that doesn’t match its tested detail gives false comfort. Correcting it means cutting it out and starting again with the specified product, and doing it once, properly, is cheaper. In Scotland, wind-driven rain finds a failed joint quickly, so it’s worth renewing joints around Madderty before they leak.
Access can matter as much as the joints themselves: joints within easy reach take less time than ones that need access equipment. Tell us how the joints are reached and call for a quote.
Why clients in Madderty choose us
- A Constructionline member, so easy to vet
- Work carried out by CSCS-carded applicators
- Products installed to the manufacturer’s instructions
- Failed material removed, not covered up
See what affects the cost and our accreditations.
From enquiry to sign-off
We schedule the visit to fit the site hours and access windows you give us. On the day, the work area is kept contained and tidy, and your contact hears from us before we move to the next area. Tell us who will meet us and how to get in at your building near Madderty. That goes into the plan alongside the quote.
- First we confirm the product and tested details named in the specification.
- Openings are measured and grouped by detail.
- Old or wrong materials are cut out.
- Where the detail needs backing, it goes in at the stated depth.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- We walk the completed areas with you and confirm the records agreed at quote stage.
Before we start on site
- Clear stock, furniture or equipment away from the joints
- Share your working hours and any access restrictions
- Point out parking and an unloading spot
Ask for a quote
For a fixed quote, call 01277 525 020 or email drawings and photos. You can also send details through our quote form.