Commercial washroom and wet-area sealing in Gilmerton, Perth and Kinross
We carry out sealing in commercial washrooms, showers, kitchens and wet areas in Gilmerton. Send details for a fixed quote.
- Shower tray joints that have opened up
- Sealant stained black around basins and showers
- Sealant laid over old silicone and now peeling
Washroom sealing near Gilmerton
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Washroom sealing in Gilmerton
In healthcare and care settings, sealing is part of keeping surfaces cleanable. We work to your organisation’s estates and infection-control requirements and any site permits. Any records you need are confirmed with the quote. We work on IPS panels and cubicles, kitchens and tea points and vanity units and basins, and the usual reasons a site gets in touch are a new bead over an old one coming away and mould spotting along silicone joints. A single leaking joint is often how a building in Gilmerton first comes to us: we look at the rest while we are there and tell you what we find.
Hospitality around smaller Scottish places like Gilmerton tends to be seasonal, and resealing washrooms in the quieter months keeps rooms available when they’re needed.
We sign every job off with a 12-month guarantee. The promise is simple: if the work we did fails within twelve months, we return to fix it.
- Place
- Gilmerton (PH7)
- Region
- Perth and Kinross
- Cover
- A 12-month guarantee
- Quote
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
Your questions answered
Does a hotel in Gilmerton need to shut while its sealant is renewed?
In most cases no closure is needed: we work room by room or floor by floor. The plan is built around your bookings.
Can you work in a care home near Gilmerton with residents in?
Yes, with the manager deciding the order and timing of rooms. Any site rules, from signing in to infection control, are agreed before we start.
Do you need to remove the old sealant?
We always remove it. New silicone won’t stick to the old, so sealing over it soon peels.
Who decides which product is used?
The specification comes first, if there is one. If there isn’t one, it comes down to the joint: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.
What site paperwork can you supply?
Tell us what site paperwork you need (RAMS, insurance certificate, CSCS details) and we’ll confirm with the quote.
What if there’s asbestos in the old mastic?
Some older mastics, especially in pre-2000 buildings, can contain asbestos. Before we disturb old sealant in an older building, we ask to see the asbestos register or survey, and work stops until any suspect material has been tested. Removing asbestos is a job for asbestos specialists, not us.
How long does a typical visit take?
We plan the time on site around your programme and access. We’ll give you an estimate of time on site when we quote.
What the job involves on each surface
Changing rooms and gyms
Changing rooms in gyms and leisure centres stay wet and warm, so mould is a constant battle. We use anti-mould sanitary silicone throughout.
Kitchens and tea points
Kitchen work can be phased around service. Your site hours and access windows set the timing.
Should maintenance staff do it?
Site maintenance staff can often handle a short internal joint. The usual problems come from preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
For a quick touch-up, site staff may be fine, but larger jobs are different: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
Why it’s worth doing now in Gilmerton
Washrooms shape how visitors judge a building. Visitors notice black sealant before they notice much else. Fresh sanitary silicone lifts a room with very little disruption. In Scotland, wind-driven rain finds a failed joint quickly, and for a smaller place like Gilmerton, a repair visit takes planning, so it’s better to act early.
Access can matter as much as the joints themselves: joints within easy reach take less time than ones that need access equipment. Mention the access as part of your enquiry.
Why appoint us
- A Constructionline member, so easy to vet
- CHAS accredited
- 12-month guarantee on workmanship
- Work to your specification and the manufacturer’s guidance
See our cost guide or our accreditations.
On site: what to expect
Working in a building that stays open takes some planning. The work area is signed and kept contained, keep walkways clear and move on in phases so staff and visitors can carry on around us. Travel to smaller Scottish places like Gilmerton is planned so the job is finished in one visit where possible, so photographs, sizes and a full list matter. Outside work also needs a suitable weather window.
- Every room is surveyed and the failed joints listed.
- You get a fixed quote with the phasing plan.
- The whole of the old bead is removed.
- Joints are degreased and dried.
- A sanitary silicone bead is laid and given a smooth tooled finish.
- Rooms reopen after the cure time.
Before we start on site
- Flag any permit to work we’ll need
- Point out parking and an unloading spot
- Tell us your opening times and when work is allowed
Ask for a quote
Need a figure for a tender or a budget? Send the scope and any drawings, and we’ll return a fixed quote that you can work with. If you have questions first, call the office on 01277 525 020 or email the details over.
Advice
Commercial clients in Gilmerton
For main contractors, we work as the sealant subcontractor. Programme, specification and site rules come first.
CHAS accredited and a Constructionline member, we’re straightforward to vet for your supplier list. Our insurance certificate can be sent along with the quote.
Keeping Gilmerton washrooms open while we work
Gilmerton has two care or nursing homes no more than 2 miles away. In care settings, wet rooms, assisted bathrooms and en suites rely on clean, sound sealant. We plan the work with the manager so residents are disturbed as little as possible. Several hotels sit less than 2 miles from Gilmerton. En suite bathrooms, staff changing rooms and kitchens all need their sanitary silicone renewed in time. The work can go floor by floor, agreed with housekeeping.
If you manage an office at a site such as Crioch Business Centre, 2.1 miles south-west of Gilmerton, the washrooms and tea points can be done a floor at a time. Clinical washrooms at sites like Crieff Community Hospital, 2.1 miles to the south-west of Gilmerton, are scheduled with the ward so the room is out of use for as little time as possible.
Gilmerton is about 14 miles west of Perth, in Perth and Kinross. Across the PH7 postcode area, the process is the same: send details, get a fixed quote, we seal, and the work is guaranteed. Gilmerton is one of 114 places we cover in Perth and Kinross for washrooms and wet areas. There’s a separate page for Dundee, about 32 miles away.
We take on washrooms and wet areas across the PH7 postcode area. Buildings on Grahame Terrace and Perth Road are within our area for washrooms and wet areas. Just outside Gilmerton, we also work in Crieff (2 miles south-west), St David's (4 miles south-east), Muthill (4 miles south), Madderty (4 miles south-east) and Tullibardine (6 miles south). Further afield, our area takes in Perth (14 miles east), Auchterarder (8 miles south-east), Letham (13 miles east), Tulloch (13 miles east), Oakbank (13 miles east) and Hillyland (12 miles east).
Near you in Gilmerton
Other landmarks nearby include Crieff and Strathearn Museum (1.9 miles south-west) and Castle Cluggy (2.9 miles west). Not far away are Loch Monzievaird.
When to call us in Gilmerton
Commercial cleaning is harder on sealant than everyday use. Strong chemicals, scourers and jet washing roughen, discolour or lift a bead so grime sticks to the damaged surface.
Site and facilities staff are often the first to spot these:
- Resealing that didn’t last because the old bead stayed
- Sealant lifting along a tray edge
- Urinal joints that look unhygienic
- Failed joints along IPS and cubicle panels
En suites at hotels like Cultoquhey House Hotel (under half a mile south-east of Gilmerton) are cleaned daily, which wears silicone over time.
What your quote should include
- The named product and why it was chosen
- How they handle RAMS and site documents
- Do they follow the manufacturer’s priming guidance?
- Will CSCS-carded applicators be on site?