Forgewood fire stopping
We carry out fire-rated and intumescent sealing of service penetrations and linear gaps in Forgewood and the surrounding area. Send photos or drawings for a fixed quote.
- Fire sealant pulled out of the opening
- Openings found when ceilings come down for a refit
- Fire seals cut back for extra cables and never reinstated
Fire stopping for businesses in Forgewood
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Why deal with it now?
Sealing behind the M&E trades area by area beats a sweep at the end. While the area is still open, every opening is easy to see and reach, and the right detail can be checked at the time. Renewing every failing joint on one visit is the sensible approach for a place like Forgewood. Send photographs and we’ll quote for everything together.
Quantities, awkward access and phased working all shape the price. Site requirements like inductions and permits play a part as well, along with the time of year for external work.
What you get with us
- Fully insured, including public liability cover
- A Constructionline member, so easy to vet
- Joints cleaned back to sound surfaces
- CHAS accredited contractor
See what affects the cost and our accreditations.
About our fire stopping in Forgewood
The test standards are BS EN 1366-3 for penetration seals and BS EN 1366-4 for linear joints, with results classified under BS EN 13501-2. A rating such as EI 60 only holds when the product is installed as it was tested. Reproducing the tested arrangement on site is the part we take care of. If you are dealing with damaged fire seals in risers and voids and fire-stopping items raised at inspection or handover, we can put it right, on joints between fire-resisting walls and floors, linear gaps at wall heads and small duct penetrations where the tested detail allows alike. Whoever orders the work in Forgewood, the brief is typically the same: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
Hotels and care homes around smaller places like Forgewood often have services added during refurbishment. We fit the specified fire-rated sealant as its published detail shows and raise it if another product is needed.
A 12-month guarantee applies to all our work. If an installation problem shows up, speak to us on 01277 525 020 or email a schedule or drawings and we’ll arrange a return visit.
- Location
- Forgewood (ML1, ML4)
- Region
- North Lanarkshire
- Guarantee
- 12 months on every job
- Quote
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Updated
- 3 November 2026
Fire-rated sealing for Forgewood buildings
Several hotels sit less than 2 miles from Forgewood. In hotels, bedroom and corridor walls are typically fire-resisting, so services added in a refit need sealing with the specified product. Scottish guidance (non-domestic Technical Handbook, clause 2.1.14) asks that penetrations match at least the fire resistance period of the element they pass through, with proprietary products, intumescent ones included, tested for their end use. We install what’s specified, to the product’s tested detail.
Hotels like Bentley Hotel (to the south of Forgewood) are refurbished in phases, and each phase can open up compartment walls. For a hospital such as Kirklands Hospital, 2.5 miles to the west of Forgewood, penetration sealing is usually phased ward by ward, with infection-control rules agreed first. Where a unit on an estate such as Braidhurst Industrial Estate (less than half a mile south-east of Forgewood), has fire-resisting walls between offices and warehouse, any new service through them should be sealed to the tested detail.
Forgewood is about 1 mile north-west of Motherwell, in North Lanarkshire. Our applicators travel to Forgewood for work on service penetrations, handled exactly as we handle every other area. 100 places across North Lanarkshire fall within our area, including Forgewood. There’s a separate page for Glasgow, about 11 miles away.
Business premises anywhere in ML1 and ML4 are within our area. Streets here include Newhut Road, Birrens Road and Kirklee Road, and sites on any of them can send details for a fixed quote. Just outside Forgewood, we also work in Mossend (1 mile north), Bellshill (1 mile north-west), Bothwell (3 miles west), Viewpark (3 miles north-west) and Carnbroe (3 miles north). Nearby towns on our patch include Cumbernauld (10 miles north), Coatbridge (4 miles north), Airdrie (4 miles north), Wishaw (4 miles south-east), Kilsyth (12 miles north) and Moodiesburn (8 miles north-west).
Around Forgewood
We work on buildings around Duchess of Hamilton Park, The Brandon Works pub and Ladywell Primary School and the streets around them. The nearest railway station is Motherwell station, roughly 0.9 miles south. A little further out are North Lanarkshire Heritage Centre (1 mile south) and Brandon Shopping Centre (1.1 miles south-east). Open spaces near Forgewood include Strathclyde Loch and Baron's Haugh RSPB Reserve.
Looking after the joints
For the best life from the joints:
- Brief every trade that openings they make must be sealed
- Look above ceilings when tiles are lifted for other jobs
- Have penetrations checked while they can still be seen
- Don’t let anyone top up a fire seal with the wrong product
Add risers, plant rooms and ceiling voids to routine fire-stopping checks. Watch for cracked sealant, new services with no seal and openings that have grown, and report them promptly.
Specify fire stopping early on refits, not as an afterthought. Details can then be picked to suit the actual pipes, cables and ducts, and installation follows the programme.
When something else is needed
We seal joints; we don’t mend everything behind them. On its own, sealant can’t deal with:
- Walls or floors that aren’t fire-resisting to begin with
- Deciding what a wall or floor needs, which belongs to the designer
- Fire doors, dampers or other fire safety equipment
Not sure which it is? You can speak to us on 01277 525 020 or email drawings and photos and we will tell you honestly.
Where we work in Forgewood
- Joints between fire-resisting walls and floors
- Linear gaps at wall heads
- Cable penetrations
- Pipe penetrations
- Service gaps in risers
- Small duct penetrations where the tested detail allows
Work for main contractors and building owners
When you manage a building on behalf of an owner, clear figures and clear communication matter. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative.
Hospitality, education, healthcare, office and retail clients come to us directly as well. The work is planned around how the building runs, so the building keeps working while we do.
Should maintenance staff do it?
Certain joints really need a specialist: for example fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. Getting these wrong typically costs more in the end than doing them right.
Paperwork matters too. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and we’ll confirm the paperwork you need with the quote.
How a job runs
Occupied buildings need a little choreography. The work area is signed and kept contained, keep walkways clear and move on in phases so staff and visitors can carry on around us. Jobs near Forgewood are often grouped with others in the same area. Tell us how flexible your dates are.
- We read the specification, drawings or penetration schedule you send.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- We fit the backing the detail asks for, to the stated depth.
- We apply the specified sealant to the depth and around the services as the detail shows.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
What we need from you
- Flag any permit to work we will need
- Let building users know which areas are affected
- Agree which areas must stay open
Request a quote
Send details, get a quote, we seal, guaranteed: that’s how every job runs. To take the first step, speak to us on 01277 525 020 or send photos by email.
Read more
Forgewood: questions and answers
What do Scotland’s building standards say about service penetrations in Forgewood?
The non-domestic Technical Handbook, clause 2.1.14, expects a penetration to keep at least the wall or floor’s fire resistance period, with proprietary products tested for the use they’re put to. Design sits with the designer and the verifier; installation to the tested detail is our part.
Will you plan work around the academic year at somewhere like New College Lanarkshire - Motherwell Campus?
Yes. We plan campus work around teaching, exams and residence turnarounds. We are CHAS accredited and a Constructionline member, and paperwork such as RAMS is confirmed with the quote.
Is your workmanship covered by a guarantee?
Yes. Workmanship is guaranteed for 12 months.
Do you seal on top of existing sealant?
No. Failed sealant is removed and the faces cleaned back to sound, dry material first, since fresh sealant will not bond reliably to aged material.
Can weather delay the job?
It can, when the joints are outside. Sealant won’t bond properly to a wet or frosty joint, so external work may be moved if conditions aren’t right. Internal work is far less affected.
Will your applicators have CSCS cards?
Yes. If you need card details for site access, let us know and we’ll send them with the quote.
Can you quote from photos?
That depends on the size and complexity of the job. Simple work can often be priced from photos, and bigger or more complex jobs typically get a visit.