Fire Stopping in Fordell Firs
We carry out fire-rated and intumescent sealing of service penetrations and linear gaps in Fordell Firs. Send photos or drawings for a fixed quote.
- Non-fire-rated filler around services
- Seals disturbed by maintenance and left open
- Seals that don’t match their tested detail
Fire stopping for Fordell Firs sites
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Owners, agents and contractors
CHAS accredited and a Constructionline member, we’re straightforward to vet for your supplier list. Our insurance certificate can be sent along with the quote.
Facilities managers want contractors who arrive with the paperwork sorted. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we will confirm with the quote.
About our fire stopping in Fordell Firs
A lot of fire-stopping work comes after M&E installation, a refit or a tenant fit-out. New cable runs, replaced pipework and extra data routes all punch holes in compartment walls, and they are easy to forget. We close the openings listed on your schedule, using the specified sealant and detail. Site teams most often ask us about fire seals cut back for extra cables and never reinstated and fire sealant pulled out of the opening, across service gaps in risers, small duct penetrations where the tested detail allows and pipe penetrations. Whether you call it commercial sealant work, mastic application or joint sealing, in Fordell Firs it comes down to the same thing: the right product in a properly prepared joint.
Around smaller places such as Fordell Firs, compartment walls and floors tend to be in schools, hotels, care homes and community buildings. Those penetrations are closed with the product the specification names, built up as tested.
Every job we finish is backed by a 12-month workmanship guarantee, in Fordell Firs as everywhere else we work. If our installation lets you down in that time, we return and fix it.
- Place
- Fordell Firs (KY11)
- Wider area
- Fife
- Guarantee
- 12 months on every job
- Quote
- Quoted before any work starts
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
Places near Fordell Firs
More services for Fordell Firs
Where services cross fire walls in Fordell Firs
Under the Scottish non-domestic Technical Handbook, clause 2.1.14, penetrations should be fire stopped to at least the wall or floor’s fire resistance duration, with proprietary products, intumescent ones included, tested for their end use. We install fire-rated sealant to that tested detail where it is specified. Several hotels sit less than 2 miles from Fordell Firs. Bedroom-to-corridor walls in hotels are normally fire-resisting, so new cabling or pipework through them has to be sealed to the tested detail.
Offices at parks like St David's Business Park, 1.1 miles south-east of Fordell Firs, are re-cabled with each new tenant, and compartment walls need sealing afterwards to the tested detail. Hotels like Boreland Lodge Hotel, 1.5 miles south of Fordell Firs, are refurbished in phases, and each phase can open up compartment walls. At a college such as Fife College - Dunfermline Campus, 1.5 miles north-west of Fordell Firs, checking penetration seals after summer M&E works is good practice.
Fordell Firs is about 2 miles south-east of Dunfermline, in Fife. Looking for fire stopping in Fordell Firs? We can help. 132 places across Fife fall within our area, Fordell Firs among them. We also cover Edinburgh, around 10 miles from Fordell Firs.
Commercial sites across KY11 are covered for service penetrations. Nearby places we also cover include Hillend (1 mile south), Dalgety Bay (2 miles south-east), Inverkeithing (2 miles south-west), Crossgates (2 miles north) and Jamestown (2 miles south) for service penetrations. Further afield, our area takes in Kirkcaldy (10 miles north-east), Glenrothes (13 miles north-east), Cowdenbeath (4 miles north), Dysart (11 miles north-east), Lochgelly (6 miles north-east) and Burntisland (6 miles east).
Near you in Fordell Firs
Recent enquiries here include premises near Hillend Tavern and the streets around them. The closest station to Fordell Firs is Dalgety Bay station, about 0.9 miles south-east. A little further out are Kingsgate Centre (3.3 miles north-west) and Fordell Castle (under half a mile east). Green spaces nearby include Loch Fitty.
Looking after the joints
Keep the joints in good shape with a few simple steps:
- Have penetrations checked while they can still be seen
- Agree the fire-stopping specification before services go in
- Put resealing into every M&E and fit-out package
- Record which product was used where
Add risers, plant rooms and ceiling voids to routine fire-stopping checks. Watch for cracked sealant, new services with no seal and openings that have grown.
Regular walk-rounds of service areas are worth the time. Catching a damaged seal early keeps the fix small compared with dozens found at once.
Questions about Fordell Firs
What do Scotland’s building standards say about service penetrations in Fordell Firs?
Under Scotland’s non-domestic Technical Handbook (clause 2.1.14), service penetrations should keep at least the wall or floor’s fire resistance duration, using products tested for their end use. The detail is set by the designer and goes through the warrant process; we install the specified product to its tested detail.
Is Fordell Firs off your patch?
No. Small places get the same service as large ones. We work across every Scottish council area. Good photos up front let us bring everything on the first visit.
Is the work guaranteed?
Yes, for 12 months. If a joint fails because of how we installed it, we come back and put it right.
Are you fully insured?
Yes. Our insurance certificate can be sent alongside the quote.
Do you take on multi-site work?
Yes. Several buildings can share a single quote, with one point of contact.
How long do sealant joints last?
It depends on movement, UV and weather, cleaning, traffic and the product. Sealant joints are maintenance items, so inspect them regularly.
Can you send site paperwork?
Tell us what site paperwork you need (RAMS, insurance certificate, CSCS details) and we will confirm with the quote.
Quoting for work in Fordell Firs
There’s no standard rate for sealant work, because every site is different. What we look at:
- Joint width, depth and condition
- Removal of failed or old sealant
- The site’s rules and procedures
- How much there is to seal
Cost follows what’s involved: stripping out, preparation, sealing, access and phasing. Call for a fixed quote and we will explain how it’s made up.
What to include in your enquiry
For an accurate fixed quote, we need to understand the site. Useful things to include:
- How the joints are reached, and at what height
- Whether an asbestos survey exists
- Rough lengths or quantities, or drawings if you have them
- Where the site is, with the postcode
Pricing a project or setting a maintenance budget? We will quote against your scope and drawings that you can work with. If you have questions first, call 01277 525 020 or send details through our quote form.
On site: what to expect
Before we leave any area, we remove the tape, clean down and inspect every joint with your site contact. If an area should be left alone while the sealant cures, we say how long and put signs out. Jobs near Fordell Firs are often grouped with others in the same area. Let us know if your dates have any give.
- We read the specification, drawings or penetration schedule you send.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Unsuitable fillers and loose debris are taken out of each opening.
- Mineral wool or other backing goes in wherever the detail asks.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- If an opening needs something other than sealant, we tell you instead of improvising.
Preparing the site
- Clear stock, furniture or equipment away from the joints
- Point out any areas we must not close
- Tell us what induction or permit system the site runs
Quotes
Photos, drawings or a schedule of the joints and a fixed quote comes back to you. If the job needs a look first, we’ll arrange a site visit.
Read more
Why deal with it now?
An open or wrongly sealed service penetration lets fire and smoke reach the next compartment much sooner than the building was designed for. Putting it right is typically a modest job when the openings are accessible. Left until ceilings are closed or a tenant moves in, the same work costs more access and more disruption. Buildings that aren’t in daily use, such as halls and seasonal premises, may let water in unnoticed, giving water time to get in. Early resealing prevents it.
Access can matter as much as the joints themselves: joints within easy reach take less time than ones that need access equipment. Tell us how the joints are reached and call for a quote.
Why appoint us
- Work to your specification and the manufacturer’s guidance
- One phone line for London, the South East and Scotland
- A Constructionline member, so easy to vet
- Fixed quotes based on photographs, drawings or a visit
See how commercial sealant jobs are priced and our accreditations and insurance.
When it isn’t the sealant
Not every problem is a sealant problem, and we are upfront when that’s the case. It won’t fix:
- Openings that need collars, wraps, batts or boards rather than sealant
- Writing the fire-stopping specification
- Approving the work on behalf of building control
Not sure which it is? You can call the office on 01277 525 020 or email the details over and we will tell you honestly before you book.
Joints and surfaces we work on
- Small duct penetrations where the tested detail allows
- Pipe penetrations
- Service gaps in risers
- Joints between fire-resisting walls and floors
- Cable penetrations
- Linear gaps at wall heads