Fire Stopping in Inverkeithing
Fire stopping for Inverkeithing, from a contractor working since 2005. Fully insured, with a 12-month guarantee.
- Snag lists that include open service penetrations
- Service penetrations left open after M&E works
- Unsealed joints where partitions meet the slab
Need fire stopping in Inverkeithing?
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
How the job changes by surface
Small ducts
Small ductwork can sometimes be sealed with sealant where the tested detail includes it. Bigger ducts and fire-resisting ductwork are normally handled with other products and we flag that rather than guess.
Risers and ceiling voids
Openings above suspended ceilings are easy to miss. We follow your schedule area by area and tell you about openings outside the list.
How we handle fire stopping in Inverkeithing
A fire-rated sealant is only one part of a tested system: the evidence covers a specific product, wall or floor type, service, gap, depth and backing. Before we seal anything, we check the opening against the detail it is meant to follow. If you are dealing with old intumescent sealant that has split away and penetration schedules that need working through, we can help, on service gaps in risers, small duct penetrations where the tested detail allows and cable penetrations alike. One point of contact handles commercial sealant work in Inverkeithing from the first photos to the final walk-round, whether it’s one building or several.
Around smaller places such as Inverkeithing, compartment walls and floors tend to be in schools, hotels, care homes and community buildings. Where services pass through, specified fire-rated sealant is installed following the manufacturer’s guidance for that wall or floor.
We sign every job off with a 12-month guarantee. The promise is simple: if the work we did fails within twelve months, we return to fix it.
- Where
- Inverkeithing (KY11)
- Wider area
- Fife
- Cover
- 12 months on our workmanship
- Quote
- Quoted before any work starts
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Towns and villages near Inverkeithing
Also in Inverkeithing
What sets the cost
To price the job, we consider:
- Which sealant the job calls for
- Backing rod, priming and other preparation
- Distance, for remote addresses
- Whether the work must be split into stages
A quote for service penetrations depends on quantities, condition and access, plus any specification you’re working to. Ask us for a fixed quote.
Sending details for a quote
Whether it’s one area or a whole building, these details speed things up:
- Drawings or a marked-up plan, if available
- Photos of the joints, close up and from further back
- What the building is and how it’s used
- The asbestos register, for older buildings
Quotes are fixed against the scope you send, so you know the figure before anyone is on site. To start the process, phone 01277 525 020 or email us.
Keeping the joints sound
For the best life from the joints:
- Check with the data sheet before painting over fire sealant
- Check risers and ceiling voids after each round of works
- Agree the fire-stopping specification before services go in
- Arrange inspection before areas are covered up
Never top up a fire seal with foam, ordinary silicone or filler. A repair should use the original product, installed the same way, or a new specification from the designer.
The simplest way to keep compartment walls intact is to plan fire stopping into every job that crosses them. That way the opening is sealed while the trade and access are still there, not months later.
Questions we’re asked in Inverkeithing
Can you seal around new services in a hotel near Inverkeithing?
Yes, where fire-rated sealant is the specified product. Each seal follows the tested detail, and rooms are done in turn.
Can you take on a job at a hospital such as Lynebank Hospital?
Yes. We work in healthcare settings as well as offices and schools. We follow the site’s permits, sign-in and infection-control procedures in every area.
Can you follow the specification on our project?
Yes. Send it with your enquiry, and the quote will be based on it, flagging anything that needs clarifying.
How long does a typical visit take?
We plan the time on site around your programme and access. You will have an expected duration with the quote.
Do you cover Inverkeithing?
Yes. We cover Inverkeithing, and the simplest way to start is to call 01277 525 020 or use the quote form.
Do you have public liability insurance?
Yes. We are fully insured, and the certificate can go with your quote.
Will your applicators have CSCS cards?
Yes. Should the site need card details in advance, tell us and we’ll confirm them with the quote.
What happens if it’s left?
Open penetrations multiply: each new service adds to the list. A schedule that is dealt with regularly stays manageable, rather than turning into a full building survey and reseal. For buildings near Inverkeithing, dealing with all the failing joints at once saves return trips. Photos of each area help us quote the whole job.
The price depends on how many linear metres there are, how much old material needs removing and the access. Call for a fixed quote when you are ready.
What you get with us
- A Constructionline member, so easy to vet
- 12 months’ guarantee on every job
- Over 20 years of commercial sealing
- Joints cleaned back to sound surfaces
See how commercial sealant jobs are priced or how we’re accredited.
Diagnose, treat, sign off
We bring the products specified for the job, along with primers and backing rod. Joint faces are cleaned back to sound, dry surfaces, primer goes on where the manufacturer specifies it, and the sealant is tooled off neatly. For work around Inverkeithing, we aim for one trip, so photos, sizes and a full list matter. External joints need a dry spell as well.
- We read the specification, drawings or penetration schedule you send and raise any questions before we price.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- We fit the backing the detail asks for, to the stated depth.
- We apply the specified sealant to the depth and around the services as the detail shows.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
What we need from you
- Have the specification and drawings to hand
- Flag any permit to work we’ll need
- Point out parking and an unloading spot
Quotes
A good quote starts with a clear picture: what’s there, how much of it, how we reach it and what’s specified. Send what you have, and we’ll arrange a site visit if anything is unclear.
Related advice
Penetration seals near Inverkeithing
A number of hotels sit less than 2 miles from Inverkeithing. Hotels are divided into compartments, and refurbishments that add pipes and cables through bedroom and corridor walls leave gaps to close. Inverkeithing has four care or nursing homes no more than 2 miles away. Care homes rely on fire-resisting walls and floors, and maintenance work that breaks through them leaves openings to seal. We install fire-rated sealant to the tested detail where it is specified.
On a hospital site such as Lynebank Hospital (3.3 miles north of Inverkeithing), fire-rated sealant goes in where the specification calls for it, with the work planned around the estates team’s permits. At a college such as Fife College, which lies west of Inverkeithing, checking penetration seals after summer M&E works is good practice. On estates like Belleknowes Industrial Estate, 0.6 miles north of Inverkeithing, the wall between office and warehouse is often fire-resisting, and cables through it need the specified seal.
Inverkeithing is about 3 miles south-east of Dunfermline, in Fife. We cover commercial sites throughout Inverkeithing, for single jobs and planned programmes alike. 132 places across Fife fall within our area, including Inverkeithing. Sites around Edinburgh have their own page, about 10 miles away.
Work on service penetrations is covered throughout KY11. We cover commercial and managed buildings on High Street, Heriot Street and Port Street and the roads nearby. You will find Inverkeithing on or near the B981. Nearby places we also cover include Jamestown (1 mile south), Hillend (1 mile north-east), North Queensferry (1 mile south), Dalgety Bay (2 miles east) and Fordell Firs (2 miles north-east) for service penetrations. Nearby towns on our patch include Dunfermline (3 miles north-west), Kirkcaldy (11 miles north-east), Glenrothes (14 miles north-east), Cowdenbeath (6 miles north), Dysart (12 miles north-east) and Abbeyview (3 miles north-west).
Landmarks near Inverkeithing
We work on buildings around The Burgh Arms. There’s a railway station in Inverkeithing itself: Inverkeithing station. A little further out are Queensferry Museum (2.9 miles south) and Kingsgate Centre (3.7 miles north-west). Open spaces near Inverkeithing include Dundas Loch.
Work for main contractors and building owners
For main contractors, we work as the sealant subcontractor on new-build and refurbishment projects. We work to your programme, your specification and your site rules, with CSCS-carded applicators on site.
Housing associations and managing agents often need work done across blocks and communal areas. Work can be phased so residents and staff keep access throughout, with each stage agreed with your site contact.